PS3 4.81 Playerkp420 DUALBOOT Firmware

Discussion in 'PS3 News' started by STLcardsWS, Nov 3, 2016.

By STLcardsWS on Nov 3, 2016 at 1:25 AM
  1. 5,054
    2,182
    123
    STLcardsWS

    STLcardsWS Administrator

    Joined:
    Sep 18, 2014
    Messages:
    5,054
    Likes Received:
    2,182
    Trophy Points:
    123
    Developer Playerkp420 has released a DUALBOOT firmware for 4.81, The theory and purpose behind the dualboot firmwares is providing a CFW a safer way to play disc games on PSN without the risk of a ban for simply having a CFW enabled Console. This sligthly modified firmware will act and behave just as an Official Firmware, so no homebrew or game backups will work, but the magic of this firmware is will allow you to RETURN to a CFW at any time. Checkout all the details in the release quote provided.

    PlayStation-3-Close-up.jpg



    • Details of 4.81 DUALBOOT FIRMWARE
      1. Made from OFW 4.81.
      2. ECDSA check patch applied to isoldr in lv0.
      3. ECDSA check patch applied to spu_pkg_rvk_verifier.
      4. Same metadata applied to keep the exact same size as OFW. (see pic below) Even all the encrypted files inside CoreOS are the same size.
      5. Can be installed over OFW 3.55 and any CFW with a lower or same version.
      6. While on this DB OFW 4.80, you can install any CFW with the same or higher Syscon version.
      7. Can only play disc based games and games downloaded from PSN. (Basically it is just like OFW, except you are able to go back to CFW without a hardware flasher.)

      For those that don't know, this is for a safer way to play on PSN. It is suggested to have 2 hard drives. One for CFW, and one for this DB OFW. When you want to act like your PS3 is not jailbroken, insert DB OFW HDD and install Playerkp420 DB OFW 4.81. Then you can play as you are on OFW. Then when you wish to go back to CFW, insert CFW HDD, and install your favorite CFW. It is important to keep your DB OFW HDD free of any homebrew apps. To prevent Sony from seeing them. Keep all your CFW stuff on your CFW HDD.

      I personally tested this on my CECH-2501A, and my CECHA01. On both I went from Darknet 4.81 v1.00 to Playerkp420 DB OFW 4.81. Then back to Darknet 4.81 v1.00.

      It is recommended anyway to boot to recovery menu after switching HDDs and installing either DB OFW or CFW with Option 6 every time you want to switch.

      Don't just switch HDDs, because then your NOR/NAND Flash will still have CFW and you will risk ban from PSN.


    • nNCNYHe.png xYg9Gst.png


    Download:Playerkp420_DB_OFW_4.81
    MD5: 6C4451661E23DA441EAED7550E3682F0

    Source: PSX-Place.com
     
    tonybologna, T.A.U and bitsbubba like this.

Comments

Discussion in 'PS3 News' started by STLcardsWS, Nov 3, 2016.

    1. xester
      xester
      Tks @Playerkp420 for this.
      I want to ask if its any way to boot this fw using other CID then the original with came with the PS3
      I believe many people wants 2 options but they need allways to change cid because of the original as been banned allready

Share This Page