Infamous Error 8002F2C5

Discussion in 'Downgrading' started by zecoxao, May 15, 2018.

  1. 123
    66
    38
    zecoxao

    zecoxao Developer

    Joined:
    Dec 9, 2014
    Messages:
    123
    Likes Received:
    66
    Trophy Points:
    38
    So, i work at a repair shop, and i have with me here two slims. One is a CECH-2000 and the other is a CECH2500B.
    Both of these consoles displayed the wifi/bt error when attempting to update the OFW. So i first grabbed the 2000, opened it, asked my boss to solder the pins to downgrade, and flashed the console (first i made a dump and it turned out to be valid) with nofsm patches from @littlebalup 's github. After building a rebug pup with no wifi/bt patches i decided to update the console, and here's where it gets weird. The console asks for 2.76 or higher (NOT 4.82 or higher) and it ALWAYS throws error 8002F2C5 when i try to update. I have been searching online and nobody ever managed to get out of this error. what should i do? I have 2 dumps here (Before patching and after patching) and they both seem fine. If needed, i can dm the dumps for proper analysis.
     
  2. 6,258
    4,181
    123
    kozarovv

    kozarovv Super Moderator

    Joined:
    Nov 8, 2014
    Messages:
    6,258
    Likes Received:
    4,181
    Trophy Points:
    123
    Home Page:
    What about FSM?
     
  3. 398
    215
    53
    haxxxen

    haxxxen Developer

    Joined:
    Oct 16, 2014
    Messages:
    398
    Likes Received:
    215
    Trophy Points:
    53
    asking for min firmware? should be dex converted I guess. have you checked it @zecoxao
     
    esc0rtd3w and kozarovv like this.
  4. 123
    66
    38
    zecoxao

    zecoxao Developer

    Joined:
    Dec 9, 2014
    Messages:
    123
    Likes Received:
    66
    Trophy Points:
    38
    When tested with a blank HDD, the error comes different
    8002F2B5
    and sometimes
    8002F225
     
  5. 123
    66
    38
    zecoxao

    zecoxao Developer

    Joined:
    Dec 9, 2014
    Messages:
    123
    Likes Received:
    66
    Trophy Points:
    38
    it's not converted, that's the strange thing about it
     
    esc0rtd3w likes this.
  6. 123
    66
    38
    zecoxao

    zecoxao Developer

    Joined:
    Dec 9, 2014
    Messages:
    123
    Likes Received:
    66
    Trophy Points:
    38
    haven't tried that yet. i'll probably try it tomorrow, since the console is assembled now and it's almost time to leave work
     
  7. 123
    66
    38
    zecoxao

    zecoxao Developer

    Joined:
    Dec 9, 2014
    Messages:
    123
    Likes Received:
    66
    Trophy Points:
    38
    one more note:
    ROS0 : 276.000
    ROS1 : 480.000
    from first dump
     
  8. 123
    66
    38
    zecoxao

    zecoxao Developer

    Joined:
    Dec 9, 2014
    Messages:
    123
    Likes Received:
    66
    Trophy Points:
    38
  9. 6,258
    4,181
    123
    kozarovv

    kozarovv Super Moderator

    Joined:
    Nov 8, 2014
    Messages:
    6,258
    Likes Received:
    4,181
    Trophy Points:
    123
    Home Page:
    What about simplest solutions like different USB stick, or different USB port?

    Did you rechecked dump after patching?
     
    zecoxao likes this.
  10. 123
    66
    38
    zecoxao

    zecoxao Developer

    Joined:
    Dec 9, 2014
    Messages:
    123
    Likes Received:
    66
    Trophy Points:
    38
    @kozarovv tried both ports didn't work.
    i'll recheck dump status tomorrow. i have with me both dumps if further analysis is needed
     
  11. 238
    177
    53
    playerkp420

    playerkp420 Moderator Developer

    Joined:
    Feb 24, 2015
    Messages:
    238
    Likes Received:
    177
    Trophy Points:
    53
    ROS headers look ok? I can double check the dumps for you if u want.

    The PUP you built works on other PS3s? I've made some minvercheck pups by accident before, LOL.

    All those errors are "Error with installing Firmware update. The PUP is not recognised as valid update."
    The 8002F2C5 adds this also
    Error with installing Firmware update. The PUP is not recognised as valid update. (Can be generated by pulling the storage device with the PUP when it is still in checking stage. DANGEROUS!). Or when trying to install MinVerCheck.PUP inmediatly after an hdd replacement in PS3 models with a NOR flash

    My guess is one of the ROS is corrupted. If it was a ROS header, it would make sense why patching doesn't fix it for FW install.

    Did you try FSM Method yet? The UPDATER.log will give us a better detail of where and why it fails.
     
  12. 123
    66
    38
    zecoxao

    zecoxao Developer

    Joined:
    Dec 9, 2014
    Messages:
    123
    Likes Received:
    66
    Trophy Points:
    38
    i don't have a FSM dongle with me. can I use teensy as FSM dongle?
    edit: @playerkp420 sent you the dumps via conversation
     
  13. 123
    66
    38
    zecoxao

    zecoxao Developer

    Joined:
    Dec 9, 2014
    Messages:
    123
    Likes Received:
    66
    Trophy Points:
    38
  14. 6,258
    4,181
    123
    kozarovv

    kozarovv Super Moderator

    Joined:
    Nov 8, 2014
    Messages:
    6,258
    Likes Received:
    4,181
    Trophy Points:
    123
    Home Page:
  15. 119
    176
    53
    mysis

    mysis Developer

    Joined:
    Jan 29, 2016
    Messages:
    119
    Likes Received:
    176
    Trophy Points:
    53
    zecoxao likes this.
  16. 123
    66
    38
    zecoxao

    zecoxao Developer

    Joined:
    Dec 9, 2014
    Messages:
    123
    Likes Received:
    66
    Trophy Points:
    38
    fixed :)
    rogero 3.7 and fsm used twice. then updated to rebug 4.82.2 no wifi/bt, to prevent hanging due to bad wifi/bt chip
     
    playerkp420 and pinky like this.

Share This Page