PS3 Ps3Xploit - Now Install CFW from 4.82 OFW: NOR/NAND Software Flash Writer + NOR Dumper Released

Discussion in 'PS3 News' started by STLcardsWS, Nov 21, 2017.

By STLcardsWS on Nov 21, 2017 at 10:02 PM
  1. 6,318
    4,261
    123
    STLcardsWS

    STLcardsWS Administrator

    Joined:
    Sep 18, 2014
    Messages:
    6,318
    Likes Received:
    4,261
    Trophy Points:
    123
    [UPDATE-2 (11-28-17) - FAQ TAB has been updated again in the article)
    There has been alot of development going on around the PS3 since the discoveries of the PS3Xploit (webkit exploit) on 4.81 OFW, first we seen the IDPS dumper (4.81/2 OFW) released with some big news & hope to come along with it, like a Flash Writer (downgrader) for OFW, so if you have been reluctant to buy a Hardware Flasher such as the E3 Flasher and bust open your PS3, but have been wanting to get your PS3 FAT(PHAT) Console and your Downgradable PS3 SLIM Models (up to & including 25xx models with minimum installable version <= 3.56) on Custom Firmware, then here is your chance with a 100% SOFTWARE SOLUTION thanks to the work of PS3Xploit Team ( @bguerville, @esc0rtd3w & W) along with contributions from new team member @habib to help expedite this release. Essentially what this Software Solution does is write a patch to the CoreOS (on NOR/NAND Chip) and when the PS3 Console is then rebooted you can install a Custom Firmware directly, So downgrading back to 3.55 is not required in the process, rather "Direct OFW to CFW patching" is done to allow for Custom Firmware Installation. Since this exploit is executed from 4.82 OFW, you can only install to a 4.82 CFW, HOWEVER if you wish to use an earlier firmware such as REBUG 4.81 for example, once on 4.82 CFW you must TOGGLE QA using a toggle tool, which allows CFW user's to freely switch CFW version from past and present. Read more about this in the Frequently Asked Question (FAQ) and more info in the details provided:



    UPDATE - View Public Warning
    BfEBwXb.jpg


    Flash Writer Compatible with these PS3 Models:
    Supports FAT Models CECHAxx/Bxx/Cxx/Exx/Gxx/Hxx/Jxx/Kxx/Lxx/Mxx/Pxx/Qxx
    Supports SLIM Models 2xxx (minver 3.56 or lower ONLY, check with >>> minverchk.pup - SEE FAQ TAB for USAGE )


    • PS3 OFW 4.82 NAND/NOR FLASH WRITER v1.0
      ***** IMPORTANT DETAILS BELOW -- AVOIDING A BRICK *****
      • Verify flsh.hex file on a flash drive and in the far right USB slot!
        • 4.82 flsh.hex MD5: 8E156C99101BF36EC3EDB832982AE46D
      • DO NOT USE ON CFW (Custom Firmware) (Only Supports OFW)
      • DO NOT USE ON PS3 Models 3xxx/4xxx (aka SuperSlims / Late Slim models) you will brick those console.
      • USE ONLY ON 4.82 OFW


      PLEASE READ FIRST:

      • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically..
      • So in short, never use the browser or set a homepage you cancel before running the exploit!
      • If you need to, set the homepage to 'blank', close the browser then reopen it to start the flash writer.

      v1.0.0 - Initial Release
      • Supports Direct OFW to CFW patching for All Phat and 2xxx Slim (minver 3.56 Dec 2010 and lower)
      • the NOR/NAND writer will just copy 3Mb of CoreOS data to both ros0 & ros1 in the flash memory.
      • There is only one version released for 4.82. The same hex patch file can be used on nor & nand.
      • It's as safe as possible, with a check for usb device & patch file making the exploit hang instead of corrupting flash if file is not found.
      • In case of corruption (extremely rare but could always happen), it's only a partial brick because no per console info ever gets erased so a hardware flasher could still be used if ever a recovery reboot was impossible.
      Usage Tips:
      1) Try using a LAN connection or a solid WiFi connection during exploitation. A weak signal can cause problems.
      2) If the exploit takes more than 5 minutes to work, reload page, browser, or restart console and try again.
      3) If you are using a LAN connection and experience network issues, make sure all cables to router are in working order.​

      Steps:
      1. Setup a small Web server on pc or smartphone. A custom miniweb application (from: https://sourceforge.net/projects/miniweb/files/) with small changes to the JaveScript, and supplied to host files if you would like to use it. Don't come to us for explanations about how to run a http server though. Google it.

      2. Extract the files from release to your http server root folder.
      2a- To use the miniweb.exe server, it is necessary to create a folder: htdocs
      2b- The files *.html and *.js included in the zip files should be copied/moved to htdocs
      3. Copy the "flsh.hex" file from release folder to root of flash drive.

      4. Put a FAT32 USB key in port closest to BD Drive (/dev_usb000).

      5. DOUBLE-CHECK your flash drive on XMB to make sure it shows up under Music, Photos, Videos, etc.

      6. Open the PS3 browser File Address window, write the IP address of your server (and the port if not 80) & press the Start button.

      7. Select the appropriate button for your console and wait for PS3 to power down. DO NOT STOP THE PROCESS ONCE STARTED!!

      8. Once PS3 has powered down, reboot console and install CFW matching OFW version. If installing through XMB does not work, boot to recovery and install.​

    • PS3 4.81/4.82 NAND/NOR Flash Dumper v1.0
      THE CORRECT FIRMWARE VERSION BETWEEN 4.81 and 4.82 IS AUTOMATICALLY SELECTED!

      UPDATE - ALSO Ported to earlier Official Firmware
      >>> Link

      PLEASE READ FIRST:
      • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....
      • So in short, never use the browser or set a homepage you cancel before running the exploit! If you need to, set the homepage to 'blank', close the browser then reopen it to start the flash writer.

      v1.0.0 - Initial Release.
      • Supports Dumping NOR on both 4.81 & 4.82.
      • bguerville tried to produce a release that was easy to port & he succeeded. Anyone able to search for offsets in IDA can add support to any firmware version in the dumper in a matter of minutes.
      • For technical reasons, the Full NAND dumper release is postponed. We will now be focusing on self execution & if we succeed there will be no need for the extra ROP work to do the NAND dumper. If we fail, I will finish it in ROP.
      • A lot of time has been invested into making the javascript + UI more efficient, as well as the trigger phase faster & more stable. I hope you enjoy the result.
      Usage Tips:
      1) Try using a LAN connection or a solid WiFi connection during exploitation. A weak signal can cause problems.
      2) If the exploit takes more than 5 minutes to work, reload page, browser, or restart console and try again.
      3) If you are using a LAN connection and experience network issues, make sure all cables to router are in working order.​

      Steps:
      1. Setup a small Web server on pc or smartphone. A custom miniweb application (from: https://sourceforge.net/projects/miniweb/files/) with small changes to the JaveScript, and supplied to host files if you would like to use it. Don't come to us for explanations about how to run a http server though. Google it.

      2. Extract the files from release to your http server root folder.
      2a- To use the miniweb.exe server, it is necessary to create a folder: htdocs
      2b- The files *.html and *.js included in the zip files should be copied/moved to htdocs
      3. Put a FAT32 USB key in port closest to BD Drive (/dev_usb000).

      4. DOUBLE-CHECK your flash drive on XMB to make sure it shows up under Music, Photos, Videos, etc.

      5. Open the PS3 browser File Address window, write the IP address of your server (and the port if not 80) & press the Start button.

      6. The dumper will detect the firmware version of your console automatically & setup the code appropriately so there is only one version for both 4.81 & 4.82. Run until ps3 beeps & shutdown. The flash dump should be a 16MB file on your USB drive as dump.hex.​

    • Frequently Asked Questions & Additional Notes


      Any Noob Friendly Guides for OFW to CFW? APRROVED BY TEAM PS3Xploit


      Will this jailbreak my SuperSlim?
      • NO, (PS3Xploit has strong possibility to eventually evolve into a HEN style exploit (that aspect will take some additional development and time, at this time PS3Xploit exploit has not evolved enough)


      Is my Model Compatible & Which Writer does my console need (NOR or NAND)?


      Can I install a CFW before 4.82, such as Rebug 4.81 or an earlier CFW?

      • Yes, however you must Toggle QA Flag. Once the Token is activated you have the ability to then freely jump CFW versions. (see below for details)

      How do I Toggle QA Flag?

      • When on a CFW download & install >>> QA TOGGLER (Standalone), (Note: Will just show a black screen then reboot the PS3 and returns to xmb. A Restart is Required. After toggling QA, cfw syscalls will be disabled (meaning your CFW patches will be disabled until the next boot, so a reboot is required after the Toggler exits back to the XMB.) Additional Info about Q/A flag can be seen here ( & also @ PS3Devwiki)

      Should i use the "999 Downgrader" vs "Toggle QA" to install a different CFW?

      • No, installing the "999 downgrader" PUP can cause various issues like on a 3.56 minver console, it will brick the console, simply just Toggle the Q/A Flag and play it safe and is so simple to move from CFW versions (up and down from version to version).

      How do i know for sure if my PS3 Model is compatible ?

      • You must have a PS3 Console that has a Factory Firmware of 3.56 and below.
      • To check, its easy with this simple tool for OFW, Download minverchk.rar
      • Then place the .pup file on a FAT32 USB Flash Drive in a PS3/UPDATE folder (create path if needed)
      • Now on the PS3 XMB goto Setting ->> System Update >>> Update via Media Storage
      • Once shown on the list select the PUP and install, shortly after there will be a message showing the factory firmware the console was shipped,
      • For this we want 3.56 and below.
      • ANYTHING HIGHER THEN 3.56 IS NOT ABLE INSTALL A CFW. Sorry this will not work for your console, but there could be a HEN (Homebrew Enabler) possible for running homebrew, but additional research and time is needed for achievement, additional details can be read here.

      What is the basic purpose of the Writer & Dumper Tools Release?

      • The dumper is to get a backup of the nor chip
      • The writer is to jailbreak your console. (Adding a patch to OFW to allow CFW installation)

      Do I have to setup my own web server or can (has) someone host this?

      • For best results and security it's advised/recommended to setup a local web-server to execute the webkit exploit, The best Unofficial Host we have found is from developer RED and his page: http://redthetrainer.com/ps3/

      How to go from Ferrox 4.82 to Rebug 4.81?

      • .Question Raised Here , OR alternatively you can uses this UNOFFICIAL modified version of REBUG 4.81.2, that will install on 4.82 (without QA FLAG as it contains an edit to the syscon version) >>>> (View Tweet & Download Link)

      Where can i find the latest 4.82 CFW?


      Where can i find PS3 Homebrew?


      New to PS3 CFW Community (Have CFW now installed and want to know a bit more)?

      • Here is a thread being started in the forums, An Intro to CFW & PS3 Homebrew . Covers various basic of firmware types and some essential apps. The thread is a WIP so expect additional items to be added.

      PSX-Place Member @lord3490 Provided Some extra FAQ's.
      Q: my console just froze and nothing's happening for over 10 minutes
      • A: turn off console, the exploit failed.
        • 1. Make sure you got the correct file on USB thumb drive and it's formatted to fat32.
        • 2. Clean browser cache
        • 3. Set start page to about:blank (or your exploit host)
        • 4. Restart Browser
        • 5. Try again

      Q: the console shut down and beeped when using the exploit, however I'm getting an error when trying to install cfw?

      • A: there are a couple of possible reasons for that:
        • 1. Did you make sure you flashed the correct file (nand/nor)? See q/a above
        • 2. Try different 4.82 CFWs and make sure the md5 is correct after copying to fat32 thumb drive.
        • 3. Try a different USB thumb drive or reformat it.
        • 4. Make a backup and format internal HDD (I just read that solved the problem for one user).

      Q: when will there be a CFW or a HEN type of hack for newer ps3 models?

      • CFW (Custom Firmware): Not Possible
      • HEN (Homebrew Enabler): you may be able to use homebrew (even backup managers) later on. The devs are working on it and they won't be faster or release it earlier because you ask. The PS Vita / PlayStation TV use a HEN exploit (HENkaku) to give you a idea on what a HEN is for those of you who have followed the Vita Scene.
      • Keep dropping by this forum and you won't miss it once it's there. You will here it first from psx-place.com the official home of the PS3Xploit Team

      Q: okay, I got a cfw installed. What do I do now?

      • A: Read. There is a lot of information on this forum. Use search function for specific topics and check out this thread >> An Intro to CFW & PS3 Homebrew to get started.

      Q: where can I download games?

      • A: From PSN, for anything else you may want to read the forums rules! psx-place.com
      --------------------------------------------------------​


    Downloads:

    Courtesy of Team PS3Xploit:
    W (Javascript, Research & Testing)
    @esc0rtd3w (Debugging, Research & Testing)
    @habib (ROP & Debugging)
    @bguerville (ROP/Javascript & Debugging)


    From PSX-Place & Team PS3Xploit: Happy Holiday's !!!!
    (First Q1 of 2018 came early, but that was really supposed to be a surprise X-Mas Gift ;p )

    USE AT YOUR OWN RISK & READ ALL INSTRUCTIONS
     

    Attached Files:

    Last edited: Dec 3, 2017

Comments

Discussion in 'PS3 News' started by STLcardsWS, Nov 21, 2017.

    1. Welbis
      Welbis
      It's not working what could I have done wrong I put the flash file on my USB it's on the right side I went to the hosted server clicked on the nor one and it keeps saying exploit failed
    2. Welbis
      Welbis
      Nvm
      it says success now I veeything is frozen
    3. bguerville
      bguerville
      If the ps3 has not shut down after 10mn then you can safely force it.
      Don't worry it's extremely unlikely that a crash happened during flash writing so no brick.
      However if your file is in /dev_usb000 named as flsh.hex, it must work. It's been tested so many times by now that I can see few reasons for such an issue. Bad usb drive? Console not on ofw 4.82?
    4. Welbis
      Welbis
      Is that normal
    5. Welbis
      Welbis
      Ima scared everything is completely frozen and it's says success
    6. esc0rtd3w
      esc0rtd3w
      try different usb stick.

      like @bguerville said, we have tested this so many times!! we have tested with pressing buttons and trying to exit during flash write and it still works fine. As long as USB stick is good (maybe reformat just to see) and you have BLANK page set and load from HISTORY after opening browser, and you are using LAN or good WiFi...it should work fine
      Yugonibblit and DemoniusXFan like this.
    7. Amaan Khan
      Amaan Khan
      I'm installing 4.82 update in my superslim
    8. Welbis
      Welbis
      So turn off console even tho it says success?
    9. bitsbubba
      bitsbubba
      Wait........
      Yugonibblit likes this.
    10. esc0rtd3w
      esc0rtd3w
      yes, if frozen for more than a minute or 2.

      it should not freeze. during my personal tests, it only froze when the USB stick was corrupted
      baileyscream and Yugonibblit like this.
    11. bguerville
      bguerville
      I wish you would post less & read more...
      After 10mn if console did not shutdown, force to shut down manually.
      There is a problem with your setup.
    12. chris
      chris
      No it was in the rightmost port, the one closest to the disc drive. I had the flsh.hex on root and a 4.82CFW PS3/UPDATE/PS3UPDAT.PUP on there (tried to get two birds stoned at once) but it kept hardlocking after throwing the success message.
    13. Vandyk
      Vandyk
      I dont know i f my usb is bad, is cheap, but never give me issues, i format the drive before do this.

      Also i use the dumper first, whit no issues.

      Yes the PS3 is 4.82

      Can i restart the flasher steps or continue straight to CFW installation?

      Thanks.
    14. Welbis
      Welbis
      Okay
    15. Welbis
      Welbis
      I'm going to retry
    16. DemoniusXFan
      DemoniusXFan
      Okay setting the homepage to blank did the trick as after doing that and restarting the console it worked on the third page refresh (after the message appears telling you to refresh). Thank you so much guys for making this all happen and also the extended help. Stay legend.
      esc0rtd3w and bguerville like this.
    17. Amaan Khan
      Amaan Khan
      Is it safe to install 4.82 update in superslim
    18. bguerville
      bguerville
      If the console has not beeped/shutdown after the exploit triggered, the patch is not applied. There is something wrong with your setup somehow.
      Yugonibblit likes this.
    19. esc0rtd3w
      esc0rtd3w
      lol...ok we need a "safe time" added to OP :-p

      10 minutes seems fair to be 100% safe as said by @bguerville but really should never be frozen that long either way
    20. crashpsycho
      crashpsycho
      Has there been any compatibilities issue with any of the loaders, cobra etc?

      Sent from my SM-G955F using Tapatalk

Share This Page