PS3 Ps3Xploit Tools v2.0 - Improved Flash Writers & Dumpers (Even easier to install CFW on 4.82 OFW )

Discussion in 'PS3 News' started by esc0rtd3w, Jan 24, 2018.

By esc0rtd3w on Jan 24, 2018 at 2:56 AM
  1. 689
    1,580
    103
    esc0rtd3w

    esc0rtd3w Developer

    Joined:
    Mar 10, 2017
    Messages:
    689
    Likes Received:
    1,580
    Trophy Points:
    103
    Gender:
    Male
    Occupation:
    Hacker
    Location:
    OHIO, USA
    Home Page:
    I will start this off with NO you can not jailbreak your PS3 SuperSlim Console's (seems to be a popular question), however that does not mean the Ps3Xploit Team, (bguerville, esc0rtd3w, habib & W), has not been hard at work, with this new release of Ps3Xploit v2.0.. In this release all the tools (IDPS Dumper, Flash Dumper & Flash Writer) have seen significant improvements and now performing the task such as installing a Custom Firmware on your 4.82 OFW PS3 (with flash writer) has been made even easier and very stable thanks to the team's new checks implemented and progression of the exploit. The Flash and IDPS dumper are also much improved. All the details are provided below please read all the spoiler and tabs before asking any questions.
    -STLcardsWS​

    PS3Xploit_Tools_v2.jpg

    PS3Xploit 2.0 Tools Now LIVE!!

    • Included Tools
      • 4.XX IDPS DUMPER
      • 4.XX FLASH DUMPER (USB Edition)
      • 4.XX FLASH DUMPER (HDD Edition)
      • 4.82 NOR/NAND WRITER (USB Edition)
      • 4.82 NOR/NAND WRITER (HDD Edition)

      Ps3Xploit Tools Changelogs
      v2.0
      • Freeze issues - Fixed
      • Occasional bad dumps - Fixed
      • No beeps & shutdown. Replaced by a graceful ROP chain exit & return to browser. This gives the opportunity to the user to dump after patching & validate the dump with littlebalup's py checker. As long as the user does not shutdown/restart, it's still possible to recover from bad patching.
      • Support for usb port 0,1,6 + sd/cf/ms cards.
      • Multi firmware support on all dumpers (4.10+) & DEX support on 4.81.
      • HDD editions for all dumpers & flash writer where a picture file placeholder is used for read/write operations.
      • Javascript refactoring for performance & efficiency.
      • ps3xploit.com will host the 2.0 update, no need for 3rd party sites.

      v1.0 (Thanksgiving 2017 Release)
      • Supports Direct OFW to CFW patching for All Phat and 2xxx Slim (minver 3.56 Dec 2010 and lower)
      • the NOR/NAND writer will just copy 3Mb of CoreOS data to both ros0 & ros1 in the flash memory.
      • There is only one version released for 4.82. The same hex patch file can be used on nor & nand.
      • It's as safe as possible, with a check for usb device & patch file making the exploit hang instead of corrupting flash if file is not found.
      • In case of corruption (extremely rare but could always happen), it's only a partial brick because no per console info ever gets erased so a hardware flasher could still be used if ever a recovery reboot was impossible



    • Frequency Asked Questions

      Will this jailbreak my SuperSlim?
      • NO,The Flasher Writer Tool is not Supported on the SuperSlim and a some very late Slim models, Howeever, PS3Xploit has a strong possiablity to eventually evolve into a HEN style exploit (that aspect will take some additional development.)

      Which PS3Xploits Tools are Compatible with my PS3 Console?



      • 9199-7853467153566ba1908c9b32aa331bb5.jpg.png
        Check this sticker on the back of your PS3 to view your PS3 Model.
        Flash Writer Model Compatibility (PHAT):
        • CECH-A01 (NAND)
        • B (NAND)
        • C (NAND)
        • E (NAND)
        • G (NAND)
        • H (NOR)
        • J (NOR)
        • K (NOR)
        • L (NOR)
        • M (NOR)
        • P (NOR)
        • Q (NOR)

        All DUMPER (FLASH/IDPS) & FLASH WRITER TOOLS are Supported for this model.


      • 9200-4361b3a6a7359ffe524f966d4eeca4bc.jpg.png
        Check this sticker on the back of your PS3 to view your PS3 Model.

        ***IMPORTANT***
        You must pay very close attention to your PS3 SLIM Models depending on when the PS3 SLIM was manufactured will determine if your console can install CFW (Flasher Writer Compatibility).

        For the 25XX series or even if your unsure about any of the models it is reccomnded you run the minverchk PUP >> (DOWNLOAD) & (How to use Minverchk) its a simply utility that show the factory installed firmware on your ps3 and for the CECH-25XX model if the utility shows 3.56 or lower you are compatible but if it shows 3.60 and higher that means your are NOT compatible to use the Flash Writer (CFW enabler for 4.82 CFW)

        • Flash Writer Model Compatibility (SLIM):
          • 20XX NOR
          • 21XX NOR
          • 25XX NOR (3.56 minver. and Lower)
        • NOT COMPATIBLE (SLIM):
          • 25XX NOR (3.60 and Higher)
          • 3XXX NOR


        All DUMPER (FLASH/IDPS) TOOLS are Supported for this model.



      • 9203-5ab5229a0530b0274c59419c8b4f8987.jpg
        Check this sticker on the back of your PS3 to view your PS3 Model.
        • FLASH WRITER NOT COMPATIBLE (SUPERSLIM):
          • 4XXXA EMMC
          • 4XXXB NOR
          • 4XXXC NOR

        All DUMPER (FLASH/IDPS) TOOLS are Supported for this model.


      Where can i find official info and details?
      Warning: Known Limitation
      • Due to the lack of proper checks after exiting the ROP chain, it is possible in some cases to obtain a success message despite an operation failure. For instance, if you choose a path where no device is plugged in, a dumper page will still display a success message despite the fact the dump save could not work. This limitation has already been addressed, the added operation checks will be part of an update to these PS3Xploit tools which will be released in the coming weeks, that update will be final, no more will come after it


    • FLASH Dumper's Help


      • PS3 4.xx NAND/NOR/EMMC FLASH DUMPER v2.0
        All PS3 models supported
        All 4.10+ CEX CFW/OFW supported
        4.81 DEX CFW/OFW supported


        IMPORTANT NOTES:
        • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....
        • So in short, never use the browser or use a homepage you cancel before running the exploit!
        • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
        Steps:
        1. Open the browser & browse to the ps3xploit.com website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
        2. Open the browser. The exploit page will load automatically. Choose your dump path option.
        3. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
        4. Trigger the exploit by pressing the dump button.
        5. On success, validate your dump with the py checker tool.

      • PS3 4.xx NAND/NOR/EMMC FLASH DUMPER - HDD EDITION v2.0

        All PS3 models supported
        All 4.10+ CEX CFW/OFW supported
        4.81 DEX CFW/OFW supported


        IMPORTANT NOTES:
        • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....
        • So in short, never use the browser or use a homepage you cancel before running the exploit!
        • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
        Steps:
        1. Open the browser & browse to the ps3xploit.com website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
        2. Open the browser. The exploit page will load automatically. Download the dump.jpg placeholder file to your PS3 System Storage using the provided link as instructed on screen.
        3. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
        4. Trigger the exploit by pressing the dump button.
        5. On success, retrieve the dump file from the PS3 XMB Photo section, rename it appropriately to dump.hex or whatever & validate your dump with the py checker tool.


      Usage Tips:
      • Try using a LAN connection or a solid WiFi connection during exploitation. A weak signal can cause problems.
      • If the exploit takes more than 5 minutes to work, reload page, browser, or restart console and try again.
      • ]If you are using a LAN connection and experience network issues, make sure all cables to router are in working order.




      • PS3 OFW 4.82 NAND/NOR FLASH WRITER v2.0
        ***** IMPORTANT DETAILS BELOW -- AVOIDING A BRICK *****
        WARNING: USE ONLY THE PROVIDED flash_482.hex AS IS. DON'T PATCH IT OR MODIFY IT OR YOU WILL BRICK *****
        • Verify flash_482.hex file on a flash drive and in the selected USB slot!
          • flash_482.hex MD5: d05be52f8d21700052fbd1fc0174acae
        • DO NOT USE ON CFW (Custom Firmware) (Only Supports OFW)
        • DO NOT USE ON PS3 Models 3xxx/4xxx (aka late Slim or Superslim models), you would brick those consoles.
        • ON SLIM 2xxx Consoles, always use MinVerChck PUP to ensure that the minimum installable firmware version is < 3.60, if ever the minimum version is >3.56, using the flash writer would partially brick your console!
        • USE ONLY ON 4.82 OFW

        IMPORTANT NOTES:
        • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to ps3 javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded due to previous browsing then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically..
        • So in short, never use the browser or use a homepage you cancel before running the exploit!
        • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.

        Steps:
        For best results with flash writer, here are the recommended steps.
        1. Install OFW 4.82 twice on the console you wish to flash to avoid the potential corruption error during CFW installation.
        2. Open the browser & browse to the ps3xploit.com website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
        3. Open the browser. The exploit page will load automatically. Choose your path option.
        4. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
        5. Trigger the exploit by pressing the patch button.
        6. On success, load the ps3xploit.com flash dumper, dump the flash memory & validate it with py checker tool. Do NOT restart the console if ever the validation tool gives you errors/warnings on both ros0 & ros1 or you risk to partially brick your console. Report your problem instead.
        7. When you are satisfied with the dump validation, restart your console & install a 4.82 CFW.


      • PS3 OFW 4.82 NAND/NOR FLASH WRITER - HDD EDITION v2.0
        ***** IMPORTANT DETAILS BELOW -- AVOIDING A BRICK *****
        WARNING: USE ONLY THE PROVIDED flash_482.jpg AS IS. DON'T PATCH IT OR MODIFY IT OR WILL BRICK *****
        • YOU
        • Download flash_482.jpg file to PS3 System Storage!
          • flash_482.jpg MD5: d05be52f8d21700052fbd1fc0174acae
        • DO NOT USE ON CFW (Custom Firmware) (Only Supports OFW)
        • DO NOT USE ON PS3 Models 3xxx/4xxx (aka SuperSlims / Late Slim models), you would brick those consoles.
        • ON SLIM 2xxx Consoles, always use MinVerChck PUP to ensure that the minimum installable firmware version is < 3.60, if ever the minimum version is >3.56, using the flash writer would partially brick your console!
        • USE ONLY ON 4.82 OFW

        IMPORTANT NOTES:
        • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to ps3 javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded due to previous browsing then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically..
        • So in short, never use the browser or use a homepage you cancel before running the exploit!
        • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
        Steps:
        For best results with flash writer, here are the recommended steps.
        1. Install OFW 4.82 twice on the console you wish to flash to avoid the potential corruption error during CFW installation.
        2. Open the browser & browse to the ps3xploit.com website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
        3. Open the browser. The exploit page will load automatically. Download the patch file flash_482.jpg to your PS3 System Storage using the provided link on screen.
        4. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
        5. Trigger the exploit by pressing the patch button.
        6. On success, load the ps3xploit.com flash dumper, dump the flash memory & validate it with py checker tool. Do NOT restart the console if ever the validation tool gives you errors/warnings on both ros0 & ros1 or you risk to partially brick your console. Report your problem instead.
        7. When you are satisfied with the dump validation, restart your console & install a 4.82 CFW.

      Usage Tips:
      • Try using a LAN connection or a solid WiFi connection during exploitation. A weak signal can cause problems.
      • If the exploit takes more than 5 minutes to work, reload page, browser, or restart console and try again.
      • ]If you are using a LAN connection and experience network issues, make sure all cables to router are in working order.

    • PS3 4.xx IDPS DUMPER v2.0

      All PS3 models supported
      All 4.10+ CEX CFW/OFW supported
      4.81 DEX CFW/OFW supported

      IMPORTANT NOTES:
      • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....
      • So in short, never use the browser or use a homepage you cancel before running the exploit!
      • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
      Steps:
      1. Open the browser & browse to the ps3xploit.com website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
      2. Open the browser. The exploit page will load automatically. Choose your dump path option.
      3. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
      4. Trigger the exploit by pressing the dump button.
      5. On success, check your idps dump with an hex editor.

    Source Code & Downloads:
    NOR/NAND/EMMC/IDPS 4.xx Dumpers v2.0 Update
    NOR/NAND 4.82 Flash Writer v2.0 Update
    flash_482.hex (already included in the Flash Writer 2.0 archive) MD5: d05be52f8d21700052fbd1fc0174acae
    MinVerChck PUP


    Exploits now hosted @ ps3xploit.com
    Official Support Forum: psx-place.com/forums/PS3Xploit/
     
    Last edited by a moderator: Apr 14, 2018

Comments

Discussion in 'PS3 News' started by esc0rtd3w, Jan 24, 2018.

    1. bitsbubba
      bitsbubba
      check & restore, it'll help prevent HDD corruption in the future & help the system run smoother. Of course you could always cancel it's up to you.
      UniqueUserName likes this.
    2. LizZo
      LizZo
      Ok the problem i was having was because of a my error.. :D
      Good job to all the team!
    3. jbuck1975
      jbuck1975
      Got it going now by setting homepage to local host. Thanks
    4. bguerville
      bguerville
      Are you're using the correct flash type for your console as well as the correct path for dumping?
      v2.0 does not random freeze so if you experience a freeze with it, the problem is with your setup or your options.
      ice likes this.
    5. Sfekke
      Sfekke
      Great work Ps3Xploit team!
      Ordered a first model of the ps3 yesterday just to try it all out.
      I'll probably also make an detailed and easy to understand tutorial give me about 1 week.
      Update 2.0 seems like a great step forward, keep it up!
      Superslims would be great, like everyone is saying.
      But do not pay attention to the ones putting pressure on you/the team, do what you'd like to do first when you'd like to do it. Ya'll take time out your day & work on things that go above many people their level of knowledge. That alone is worth a medal!
      Zoilus, esc0rtd3w, bguerville and 3 others like this.
    6. mysis
      mysis
      Do you still need to code to enable package install?
      kozarovv likes this.
    7. habib
      habib
      It just patches not like e3 or progskeet and then user can install cfw
      We have been working on 3k/4K stuff but our lack of vsh knowledge slows us down. But it’s been good progress so far
      STLcardsWS and kozarovv like this.
    8. mysis
      mysis
      Yes, i was talking about 3k/4k because you cannot install CFW at all there, but still enable pkg install and bypass ecdsa check on pkg's imo.
      habib, STLcardsWS and kozarovv like this.
    9. Mijo
      Mijo
      Really need help guys!:) im new to all this:)

      Sendt fra min SM-G900F med Tapatalk
    10. M2KO
      M2KO
      Hello.dopo mod application successfully I have this result with ps3dumpcecker
      BadDump.jpg

      can I proceed with flash cfw or try again mod?
      thanks for help
    11. lord3490
      lord3490
      I haven't tried 2.0 yet...
      Are you using HDD or USB method?
    12. Mijo
      Mijo
      Im using USB method. And im using the online solution. Maybe thats the reason why it freezes??

      Sendt fra min SM-G900F med Tapatalk
      esc0rtd3w likes this.
    13. lord3490
      lord3490
      If your internet connection is good online should be fine.
      Format your USB drive to fat32, copy the flash_482.hex to the root of it, connect it to the right USB port on the ps3 (closest to blue ray drive).
      Check in xmb if the drive is recognized by the console (shown in photos menu).
      Set nor exploit page as homepage in the browser.
      Clear cache and restart the browser/ps3.
      Check the box "/dev_usb000/flash_482.hex" and try again.
      UniqueUserName likes this.
    14. Mijo
      Mijo
      My internet is fine, USB i format and put in the right USB port. Ive done everything as you instructed, but still it freezes during Patching. I havent tried XMB though. How do i do that?

      Sendt fra min SM-G900F med Tapatalk
    15. Mijo
      Mijo
      My ps3 is the cech-2104 OFW 4.82.

      Sendt fra min SM-G900F med Tapatalk
    16. Mijo
      Mijo
      It freezes in this step every time[​IMG]

      Sendt fra min SM-G900F med Tapatalk
      esc0rtd3w likes this.
    17. lord3490
      lord3490
      I just meant to look if the USB drive gets recognized by the ps3. You can check that by going to video, music or photo in the main menu.

      Set exploit page to homepage, clear browser cache and restart browser or ps3.
    18. habib
      habib
      Indeed we can.
      We are working on something bigger... ;)
      It’s self execution, we have some memory problems and soon it will be fixed
    19. dukenukem7777
      dukenukem7777
      Worked on a friend's Phat and my Slim. Thank you
      esc0rtd3w and bguerville like this.
    20. M2KO
      M2KO
      if patch is ok but check dump bad do you proceed with flash cfw or repeat patch?

Share This Page