Dismiss Notice

BEWARE of IMPOSTERS, posing as the PS3Xploit Members/Team:


  -PS3Xploit does NOT have a discord channel, some imposter are using one
 

  -If the info can't be found on ps3xploit.com or psx-place.com its fake
 

  -ZuKuTo / OFWModz is one of the fake names of these imposter's are using to represent the PS3xploit team.

 

 

How to convert dump_patched.hex to bkpps3.bin

Discussion in 'Ps3Xploit [Official Forum]' started by Supermodz1, Feb 10, 2020.

  1. 18
    3
    32
    Supermodz1

    Supermodz1 Member

    Joined:
    Feb 8, 2018
    Messages:
    18
    Likes Received:
    3
    Trophy Points:
    32
    Gender:
    Male
    I want to unbrick my console and I have the original dump (dump_patched.hex) to flash my ps3 with e3 flasher i think i have to have bpps3.bin but I have dump_patched.hex instead. so how can I convert it??

    In addition. The reason I want to convert is that I soldered the ps3 both Nor tristate and ground. My motherboard model is Sur-001. I put my original dump_patched.hex in an SDcard renaming bpps3.bin and inserted to e3 flasher slot then the 1 button up and all other down on the e3 flasher and started then the blue lights come 1 by 1 until it starts dancing backward and forward I disconnected everything like the wire I soldered.

    Now my ps3 starts and now power off like it was before and I can switch off with a long pressing start button but I can not go recovery mode I can only switch off my ps3 that is why I am asking to convert dump_patched.hex to .bin. so where is the problem? it is my first time to try to unbrick a ps3 so i would appreciate an urgent help

    Thanks in advance!
     
  2. 104
    23
    27
    sautzer

    sautzer Member

    Joined:
    Dec 21, 2019
    Messages:
    104
    Likes Received:
    23
    Trophy Points:
    27
    Gender:
    Male
    I'm not sure but try with PyPS3checker, it should do the work
     
  3. 18
    3
    32
    Supermodz1

    Supermodz1 Member

    Joined:
    Feb 8, 2018
    Messages:
    18
    Likes Received:
    3
    Trophy Points:
    32
    Gender:
    Male
    I tried already because i had dump.hex file and i used it to patch but it gave me dump_patched.hex instead of bkpps3.bin
     
    Last edited: Feb 10, 2020
  4. 104
    23
    27
    sautzer

    sautzer Member

    Joined:
    Dec 21, 2019
    Messages:
    104
    Likes Received:
    23
    Trophy Points:
    27
    Gender:
    Male
    Also it has to be named bkpps3.bin, no bpps3.bin. Have you renamed it correctly before putting it into the E3 flasher?
     
  5. 1,869
    1,190
    297
    Louay

    Louay Senior Member

    Joined:
    Jan 23, 2017
    Messages:
    1,869
    Likes Received:
    1,190
    Trophy Points:
    297
    Gender:
    Male
    Occupation:
    College Student,GAMING,REPAIRING,XMB Modder
    Location:
    Tunisia
    Home Page:
    Cause PS3Xploit Dumper Dump is like dumps made by Teensy or Progskeet but E3 Flasher dump is byte_swapped

    So to flash PS3Xploit dump,Teensy dump,Progskeet dump using E3 Flasher you need to byte-reverse/byte-swap your dump using PyPS3Patcher with swap command command or with FlowRebuilder

    swap 1.png

    swap 2.png

    swap 3.png
     
    Algol likes this.
  6. 18
    3
    32
    Supermodz1

    Supermodz1 Member

    Joined:
    Feb 8, 2018
    Messages:
    18
    Likes Received:
    3
    Trophy Points:
    32
    Gender:
    Male
    You are right just writing error here but I renamed dump_patched.hex with bkpps3.bin then when I pressed the start button on e3 flasher did not get the error all blue lights 1 by 1

     
    Last edited by a moderator: Feb 10, 2020
  7. 18
    3
    32
    Supermodz1

    Supermodz1 Member

    Joined:
    Feb 8, 2018
    Messages:
    18
    Likes Received:
    3
    Trophy Points:
    32
    Gender:
    Male
    Hi. i did the same and I converted the dum.hex to .bin file but i soldered again and connected e3 flasher with my converted original patch file in sd card and the first switch flash up all others are down to make recovery but after i did the problem is the same. my ps3 starts and stays on and I can switch off with long pressing but I can't go recovery mode bcz i do not get 3 beeps, only switch off. Is there something i can do to save my ps3 back
     
  8. 1,869
    1,190
    297
    Louay

    Louay Senior Member

    Joined:
    Jan 23, 2017
    Messages:
    1,869
    Likes Received:
    1,190
    Trophy Points:
    297
    Gender:
    Male
    Occupation:
    College Student,GAMING,REPAIRING,XMB Modder
    Location:
    Tunisia
    Home Page:
    Did you did byte swap to dump as i told before ?
     
    pink1 likes this.
  9. 104
    23
    27
    sautzer

    sautzer Member

    Joined:
    Dec 21, 2019
    Messages:
    104
    Likes Received:
    23
    Trophy Points:
    27
    Gender:
    Male
    Also, have you checked your dump? Is it good?
     
  10. 18
    3
    32
    Supermodz1

    Supermodz1 Member

    Joined:
    Feb 8, 2018
    Messages:
    18
    Likes Received:
    3
    Trophy Points:
    32
    Gender:
    Male
    [​IMG] yes dump is ok as you can see the image.
     

    Attached Files:

    • dump.png
      dump.png
      File size:
      285.9 KB
      Views:
      45
  11. 18
    3
    32
    Supermodz1

    Supermodz1 Member

    Joined:
    Feb 8, 2018
    Messages:
    18
    Likes Received:
    3
    Trophy Points:
    32
    Gender:
    Male
    And this is bytte swap
     

    Attached Files:

  12. 1,869
    1,190
    297
    Louay

    Louay Senior Member

    Joined:
    Jan 23, 2017
    Messages:
    1,869
    Likes Received:
    1,190
    Trophy Points:
    297
    Gender:
    Male
    Occupation:
    College Student,GAMING,REPAIRING,XMB Modder
    Location:
    Tunisia
    Home Page:
    You didnt byteswap the dump it must say Yes in thay box

    20200212_103054.jpg
     
  13. 18
    3
    32
    Supermodz1

    Supermodz1 Member

    Joined:
    Feb 8, 2018
    Messages:
    18
    Likes Received:
    3
    Trophy Points:
    32
    Gender:
    Male
    I did but this time only to show you and i show you the right one
     

    Attached Files:

  14. 18
    3
    32
    Supermodz1

    Supermodz1 Member

    Joined:
    Feb 8, 2018
    Messages:
    18
    Likes Received:
    3
    Trophy Points:
    32
    Gender:
    Male
    i rename that bytted swap file into bkpp3.bin and put the e3flasher and i got no error the blu lights 1 by1 untill it ends and starts to dance like backward/forward
     
  15. 104
    23
    27
    sautzer

    sautzer Member

    Joined:
    Dec 21, 2019
    Messages:
    104
    Likes Received:
    23
    Trophy Points:
    27
    Gender:
    Male
  16. 18
    3
    32
    Supermodz1

    Supermodz1 Member

    Joined:
    Feb 8, 2018
    Messages:
    18
    Likes Received:
    3
    Trophy Points:
    32
    Gender:
    Male
    I READ THAT LINK. only this line attracted me( Do you have your original unpatched virgin dump from this console? Flash that back to the ps3. Are you using the tristate point when flashing then removing the wire? That may be why your dumps aren’t taking. Have you tried just running you good dump from the e3 nor itself? I have a feeling that using or not using the tristate properly is your issue. I’m not sure what switch settings you need but any guide like playerkp420 will give you those. @Louay @littlebalup)

    I have the original virgin dump.hex and i will use the tristate point plus Ground. my motherboard is Sur-001 but which nor tristate is correct? see the picture
     

    Attached Files:

  17. 1,869
    1,190
    297
    Louay

    Louay Senior Member

    Joined:
    Jan 23, 2017
    Messages:
    1,869
    Likes Received:
    1,190
    Trophy Points:
    297
    Gender:
    Male
    Occupation:
    College Student,GAMING,REPAIRING,XMB Modder
    Location:
    Tunisia
    Home Page:
    bkpps3.bin and not bkpp3.bin
     
  18. 18
    3
    32
    Supermodz1

    Supermodz1 Member

    Joined:
    Feb 8, 2018
    Messages:
    18
    Likes Received:
    3
    Trophy Points:
    32
    Gender:
    Male
    Sorry i mean bkpps3.bin but which Nor tristate picture is write i did one of them and i got no error or beeps ps3
     
  19. 104
    23
    27
    sautzer

    sautzer Member

    Joined:
    Dec 21, 2019
    Messages:
    104
    Likes Received:
    23
    Trophy Points:
    27
    Gender:
    Male
    In the first photo is in the upper right and in the attached photo you can see the other pinpoint, it shows jtp/jtd but it's the same pinout as sur. Also, I personally have soldered tristate to the brown part of the motherboard and worked well.
     

    Attached Files:

  20. 11
    0
    5
    juanml7

    juanml7 Forum Noob

    Joined:
    Friday
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    5
    Gender:
    Male
    [QUOTE = "Louay, publicación: 227094, miembro: 27918"] No byteswap el volcado debe decir Sí en el cuadro

    [ATTACH = full] 23866 [/ ATTACH] [/ QUOTE]
    [QUOTE = "Louay, publicación: 227094, miembro: 27918"] No byteswap el volcado debe decir Sí en el cuadro

    [ATTACH = full] 23866 [/ ATTACH] [/ QUOTE]

    buenas, estoy intentado hacer este proceso, ya le he hecho el byte reverse y cambiado de nombre a bkpps3.bin pero al testearlo me da dos errores y me dice que es bad. ayudadme por favor test_1.jpg
     

Share This Page