PS3 PKG Linker 2.0 - Serve Packages to your PS3 (HAN/CFW)

Discussion in 'CFW Tools' started by pink1, Apr 1, 2018.

By pink1 on Apr 1, 2018 at 4:50 PM
  1. 1,903
    2,055
    397
    pink1

    pink1 Moderator Developer

    Joined:
    Feb 25, 2015
    Messages:
    1,903
    Likes Received:
    2,055
    Trophy Points:
    397
    Gender:
    Male
    The new PKG Linker is here, we both put a lot of time and effort into this project, so we hope you get many hours of happy use out of it. Within a few days of the release @DeViL303 and I (pink1) started working on an update for PKG Linker v1. After seeing all of the server problems in v1 we built v2 around a Modular copy of Uniform Server. The project has been completely rebuilt, with new features including:

    rnSOEA5.gif

    • D7F57Ju.png
      New Features
      • Complete GUI overhaul
      • Better error handling for corrupt pkgs
      • Saveable settings
      • Server control and better server error handling
      • Better IP/adaptor detection
      • Better port control, now settings controls app and server
      • Minimise to tray
      • Tray notifications for important actions
      • Tray controls while app is minimized
      • PS3 side server controls via new server setup item on the XMB.
      • Now detects package signing type and lists it in the app and on the XMB
      • Ping Tool for checking PS3 is reachable in direct connection situations
      • PS3Xploit Resigner Tool - all packages in unsigned folder can be signed with one click
      • Warnings when packages in folder have changed but pkg list not updated.
      • Warning when port has been changed but server not restarted.
      • Auto list generation when its required, like after saving new settings.
      • Theme settings, colors, Light/Dark.
      • Help section with trouble shooting for connection problems

    • What is PKG Linker?
      PKG Linker is a PC application that is used to serve packages to CFW/HAN enabled PS3s, it utilizes a webserver to fool the PS3 into thinking it is downloading the package from Sony servers.

      Using this method to install a package, gets around the 4GB maximum filesize limitations of fat32, normally faced when using external storage devices.

      With PKG Linker there is no limit. With a wired network its quick too, I have transferred a 15GB package in under 20 minutes. It should work over wifi, but that same 15GB package could take 10 hours or more.


    • Trouble shooting

      If you have a multiple network adaptors enabled at the same time this app could pick up the wrong IP. This can happen with VPNs or virtual adaptors too.

      Please check that the app is showing your PCs correct IP address. If its not showing your IP address then type it in or select it from the dropdown menu, rescan or save settings, then reinstall the Package_List.pkg via USB. To find out your current IP address open a Command prompt window and type "ipconfig", if multiple IPs are listed try them all one by one if you are not sure which IP is correct.

      Note: Every time the port or IP address is changed in this app you must install a freshly made Package_List.pkg via USB and then reboot the PS3. This is important, if you dont do this the PS3 is still looking to the old IP address or port for both the Package_List.pkg, and all the other packages.

      If you are having problems, after any network changes you can try the Ping tool in PKG Linker settings to see if the PS3 is reachable, just enter your PS3s IP which can be got from: PS3 Network settings > Settings and Connection Staus List > IP Address .

      Related PS3 Errors


      Any errors not on this list are most likely not related to this app and are a problem with your pkgs.

      • 404 Error means a server is running on correct IP but the file can not be found, bad link. File moved
      • 400 Error means server is running, can be a port issue, port conflict maybe. Try change port.
      • 80029567 Signing check failed, HAN Enabler not ran or debug installer ran by mistake or pkg not resigned.
      • 80029564 Signing check failed, On CFW trying to install a pkg signed for HAN.
      • 80023324 Wifi connection issues, or just bad connection, use a cable, see bottom.
      • 8071053D Blocked, check port settings, check firewalls etc.
      • 80710092 Host not reachable is a common error and can be anything so its a hard error to trace.

      Possible reason for 80710092

      • IPs configured wrong.
      • Windows firewall.
      • Other firewall or AntiVirus.
      • Cable problem.
      • Port blocked on server.
      • Port conflict on server.
      • Missing dll on system.
      • Package_List.pkg not installed by usb since server settings changed.
      • PS3 not rebooted since new Package_List.pkg installed.

      Things to try:


      • Disable firewalls, inc windows firewall, defender, avast shield etc.
      • Make sure the pkg linker app says your PCs current IP, it may have picked up wrong IP.
      • See if you can access server via ps3 web browser.
      • Install fresh package list via usb everytime you change settings.
      • Always reboot ps3 to see changes on XMB after loading a new list.
      • Try changing ports.
      • Try run other servers, see below for xampp instructions.
      • Read the entire pkg linker 2.0 thread and try other peoples solutions.
      • Google how to set up a web server and try learn about it.

      Instruction for using another server like xampp

      • Make sure no other webservers are running first.
      • Install XAMPP, run it, click the top start button for apache.
      • Put packages and the PKG Linker exe into the c:\xampp\htdocs folder.
      • Run PKG Linker, dont start the built in server.
      • Go to PS3 and run HAN Enabler and then try refresh list.
      • If it downloads the new Package_List.pkg then Reboot.
      • Run HAN Enabler again and try install a pkg.
      • While testing its best if you do this with pkgs that you 100% know work via USB.


      Connection speed issues and error 80023324

      You are better off running a wired connection for the best transfer speeds. The PS3's Wifi is very slow and is known for dropouts during large transfers. With a wired setup you can get almost 1GB per minute transfer speeds. You can connect via a router or directly with one cable going from PS3 to PC.

      Note that if connecting directly without a router you will have no DHCP for giving out IP addresses.

      So you will need to do this to achieve a connection:
      • Enter manual IP addresses on both devices, see below for an example if you don't know how.
      • Set the PC to 192.168.0.2
      • Set the PS3 to 192.168.0.3
      • Set the gateway on both PC and PS3 to 192.168.0.1
      • Set the subnet mask the same for both to 255.255.255.0
      • Set the DNS on both to be 8.8.8.8
      • Do not bother testing the connection on PS3, it will fail, skip the test.
      • Then make sure this app says 192.168.0.2 for the IP.(or whatever your PCs IP is set to)
      • Rescan with this app and then Install Package_List.pkg again manually via USB, then reboot.
      • Then run the webserver and you should have no 80023324 errors and fast speeds


    • Thanks to

      The PS3Xploit Team: W, @esc0rtd3w , @bguerville & @habib for HAN, PS3xploit-resigner an extra thanks to habib for the help with the signing type.

      @Berion for the icons.

      @Rudi Rastelli for PS3 PKG Ripper.

      All of the other developers and members from over the years who have helped in any way.



    Download @: psx-place.com
     
    Last edited by a moderator: Nov 14, 2018

Comments

Discussion in 'CFW Tools' started by pink1, Apr 1, 2018.

    1. xXTakarashiXx
      xXTakarashiXx
      thanks for all your efforts, awesome update
    2. Yung_Mask
      Yung_Mask
      You have a release date for Han Tools Box v 0.4 ? Im so excited
    3. Olvido
      Olvido
      Wlan cable tut? Shits too slow D:
    4. saintmaximilian
      saintmaximilian
      Gorgeous!!!! Congratulations thats a ver well programmed soft! Testing now! Just a question, if the unsigned are useles, why to keep in folder? Greetings for the devs!
    5. saintmaximilian
      saintmaximilian
      Yes the have but not for 0.6 and not for 0.7 why people ask for a major version instead use the actual
    6. saintmaximilian
      saintmaximilian
      I'm testing with too much pkg unsigned, cant be donde in background or select what pkg? a full batch of 4 or 5 pkg of 10 gb takes long, and yes I know put one and convert, or waith
    7. c.link86
      c.link86
      thanks pink1 hopefully it'll work this time
      DeViL303 likes this.
    8. Vorgh
      Vorgh
      How do i resolve that?

      Attached Files:

      DeViL303 likes this.
    9. saintmaximilian
      saintmaximilian
      rap signer does not makes a pkg for instalation in shared folder, and just create only rif files, not automatized, and i found a bug, when you erase a pkg of the shared folder and its serving and copying programs anounce an folder update, and when i update when i'm copying app crash and doesn't open full just show background (in my case black default) but the ps3 its downloading
      Bros12 and DeViL303 like this.
    10. adhil_commander
      adhil_commander
      Thanks guys another good update. Highly appreciate your work on Playstation 3. We feel it. Great work ❤
      DeViL303 likes this.
    11. Monumental
      Monumental
      Muchas gracias por el aporte!
      Thank You very much!
      DeViL303 likes this.
    12. Diaz Minato
      Diaz Minato
      Do i need update han installer and han toolbox v3 ?
      I have installed old han installer and han toolbox v0.2
    13. Bloodmoons366466
      Bloodmoons366466
      not sure if i will upgrade since the other setup works fine for me.I might try it later on
      Gibby_Garcia and DeViL303 like this.
    14. DeViL303
      DeViL303
      Did you read the trouble shooting, if not try the stuff in the "things to try" section.
      I would not say useless, unsigned pkgs work perfectly for me on cfw. So we will not automatically delete files, if there was an error it might delete wrong files, or you might not understand how app works and not expect them to be deleted etc etc, lots of reasons not to delete files.
      It might work with v0.2, we are not trying to maintain compatibility with old versions , so don't expect it to work.
      Last edited: Apr 2, 2018
      n00b and Diaz Minato like this.
    15. DeViL303
      DeViL303
      I won't be helping with resigner issues myself. I'm on cfw, I use isos and can't be arsed learning about that stuff :)
      Last edited: Apr 2, 2018
      n00b likes this.
    16. Fuzion9
      Fuzion9
      Spot on gents. Great app :)
      DeViL303 likes this.
    17. kabirka
      kabirka
      Can't start server

      Attached Files:

    18. DeViL303
      DeViL303
      Read the error, see what it says, spaces are not allowed in the path.
      n00b likes this.
    19. Nabeel AK
      Nabeel AK
      I have the same problem
    20. DeViL303
      DeViL303
      And did you try the same solution?

      Or did you just read as far as the guy who had the same problem as you and had already asked for help, and then you decided not to read the next post with the solution and just ask here instead? :)
      n00b likes this.

Share This Page