Remarry doesn't work...

Discussion in 'General PS3 Discussion' started by Gehirnstaub, Jan 21, 2017.

  1. 24
    4
    32
    Gehirnstaub

    Gehirnstaub Member

    Joined:
    Jan 18, 2017
    Messages:
    24
    Likes Received:
    4
    Trophy Points:
    32
    Hello everyone I've got a problem with my PS3 Console.
    I own a DECH0AA0 Debug Console and I try to run physical Blu-Ray copies on this console. This doesn't work on the offical way (receiving error code 8002997F while starting a blu ray on CEX / DEX), so I contacted Joonie about my problem and got some solutions which didn't work. One of these suggestions was to rewrite the Target ID to CEX, disable Cobra, launch multiMAN and fix the Blu Ray isue with this one option. No success at all. ATM I try to remarry my BD-Drive to receive the keys (which are missing on DECH consoles) at the end of the procedure and then finally update to Rebug 4.XX again. As executable FWs I already used Rebug 3.55.4 and Rogero 3.55 3.7A, both FWs gave me the same error. I used this tutorial http://www.psdevwiki.com/ps3/Remarry_Bluray_Drive as a base to start with. FSM activated and restarted the console with the necessary files and this shows up.

    === Drive Init ===
    [Drive Init] FAIL
    Last error
    - ERROR(ercd=FFFFFFFF) - CEX_drive_init_pblock, 4640

    - ERROR(ercd=FFFFFFFF) - CEX_drive_init 5114

    This error is also covered with an pinkish "NG"

    Is there any "fix" for that? Before I made these decisions my Blu Ray drive worked. I could play original PS3 game discs and backups. The same thing on any 3.55 before entering FSM. Tested it with Black Ops 1. Even after the failed procedure it works. Same error with the blu rays above on FW 3.55. I just want to try at least to get the Blu Ray movies back, so I don't have to buy another console. :)

    Any helpful information would be cool and thanks again @Joonie for all your help and suggestions!
     
  2. 7,846
    6,526
    647
    bguerville

    bguerville Moderator

    Joined:
    Feb 25, 2015
    Messages:
    7,846
    Likes Received:
    6,526
    Trophy Points:
    647
    Location:
    Earth
  3. 3,107
    3,117
    372
    Joonie

    Joonie Developer

    Joined:
    Oct 15, 2014
    Messages:
    3,107
    Likes Received:
    3,117
    Trophy Points:
    372
    Location:
    Southwest US
    About games not working, it's because you're on FSM,

    Just focus on remarrying and restoring drl/crl,

    As soon as you exit fsm your games will work


    Sent from my iPhone using Tapatalk
     
  4. 24
    4
    32
    Gehirnstaub

    Gehirnstaub Member

    Joined:
    Jan 18, 2017
    Messages:
    24
    Likes Received:
    4
    Trophy Points:
    32
    @bguerville I guess then I have to live without the movies. Looks way too complicated for me!
    @Joonie I already knew that. Same with Install Packages. Doesn't work until you leave FSM. :)
     
  5. 3,107
    3,117
    372
    Joonie

    Joonie Developer

    Joined:
    Oct 15, 2014
    Messages:
    3,107
    Likes Received:
    3,117
    Trophy Points:
    372
    Location:
    Southwest US
    I think I know what's happening, you said you're from Germany right? If your movie is PAL, then you need to change your target id to 85, by default, the toolbox writes 84 on DECH unless it was converted from retail

    Try using idpset by @Zar to change idps and play movie after using multiman to fix drl

    Sent from my iPhone using Tapatalk
     
    bguerville likes this.
  6. 24
    4
    32
    Gehirnstaub

    Gehirnstaub Member

    Joined:
    Jan 18, 2017
    Messages:
    24
    Likes Received:
    4
    Trophy Points:
    32
    okay, still no success here. Updated again to Rebug 4.78 CEX and fixed the Blu Ray Playback with multiMAN. MM says everything should be alright. I installed SEN Enabler to spoof Target ID 85 and tried as Blu Ray Fight Club. Still the same error code. :-/
     
  7. 7,606
    5,756
    872
    kozarovv

    kozarovv Super Moderator

    Joined:
    Nov 8, 2014
    Messages:
    7,606
    Likes Received:
    5,756
    Trophy Points:
    872
    Home Page:
    I doubt that spoofing IDPS is enough. You should probably permanently change it. But wait for @Joonie answer. I never messed with DECH personally.
     
  8. 7,846
    6,526
    647
    bguerville

    bguerville Moderator

    Joined:
    Feb 25, 2015
    Messages:
    7,846
    Likes Received:
    6,526
    Trophy Points:
    647
    Location:
    Earth
    @Joonie never told you to SEN Enabler to spoof in lv2, he said you should use idpset to change the targetid in eid0/eid5. It's completely different.
    Try again but follow @Joonie's suggestions...
     
  9. 24
    4
    32
    Gehirnstaub

    Gehirnstaub Member

    Joined:
    Jan 18, 2017
    Messages:
    24
    Likes Received:
    4
    Trophy Points:
    32
    also done now. Still the same issue. converted to CEX, installed IDPSet and changed from 82/84 to 85.

    EDIT: just tried to restore everything, to get back on 82 but I can't change the ID in EID5 back to 82
     
  10. 3,107
    3,117
    372
    Joonie

    Joonie Developer

    Joined:
    Oct 15, 2014
    Messages:
    3,107
    Likes Received:
    3,117
    Trophy Points:
    372
    Location:
    Southwest US
    You can't change EID5... the option in idpset doesn't make any effect. You're supposed to change EID0 and delete contents inside dev_flash3, and re do the whole step

    And don't change back to 82 until you get your bd movie working...


    Sent from my iPhone using Tapatalk
     
  11. 24
    4
    32
    Gehirnstaub

    Gehirnstaub Member

    Joined:
    Jan 18, 2017
    Messages:
    24
    Likes Received:
    4
    Trophy Points:
    32
    again no success.
    My steps:
    1. Converted back to CEX
    2. Disabled Cobra Mode
    3. Started IDPSet and changed from 82/84 to 85 in EID0 and EID5
    4. Started multiMAN and deleted the folder inside dev_flash3
    5. used the option to renew the keys and started again a blu ray
    also strange thing is, that when I convert back it doesn't show up, that the console is a real DEX console the toolbox just changes directly. As I said EID5 says 85 instead of 82
     
    Last edited: Jan 22, 2017
  12. 3,107
    3,117
    372
    Joonie

    Joonie Developer

    Joined:
    Oct 15, 2014
    Messages:
    3,107
    Likes Received:
    3,117
    Trophy Points:
    372
    Location:
    Southwest US
    What's the error message for playing bd?

    When it comes to debugging, comments like "not working" or "no success" aren't very helpful.

    BD movie issue can be caused by various reasons and there's a different message for each cause.

    for ex) (which is very common for NAND system that loses its DRL/CRL by updating FW)
    [​IMG]

    OR

    "The video can not be played (80029940)"

    OR "(800299D2)" (invalid signing, which can be fixed by resigned bd player modules)

    OR" Region errors"

    You need to write the correct target id (0x82) on EID5 through IDPSET again, (Which only writes plain sting instead of re-encryption)
     
    Last edited: Jan 22, 2017
    WTF-IGO likes this.
  13. 24
    4
    32
    Gehirnstaub

    Gehirnstaub Member

    Joined:
    Jan 18, 2017
    Messages:
    24
    Likes Received:
    4
    Trophy Points:
    32
    I'll take some pictures:

    Blu Ray Issue from the beginning on tested with old movies and new movies:
    [​IMG]




    The other problem. Trying to get the EID0 back to DEX with the 82 this happens. Cause the DEX Target ID is already in the EID0 from the CEX to DEX switch, the tool doesn't even try to write on EID5, so my EID5 ID is always that number, that I choose like for example 85

    Removed IDPS// kozarovv

    This happens while on CEX, trying to write EID5 to Target ID 82:

    Removed IDPS// kozarovv
     
    Last edited by a moderator: Jan 23, 2017
  14. 3,107
    3,117
    372
    Joonie

    Joonie Developer

    Joined:
    Oct 15, 2014
    Messages:
    3,107
    Likes Received:
    3,117
    Trophy Points:
    372
    Location:
    Southwest US
    Try not to change idps to 82 using idpset, always use toolbox to convert back to dex.

    I know idpset also convert the similar way that toolbox does, but to avoid confusion. Don't use idpset to convert dex.

    Also you're not supposed to touch eid5 if your target id on eid5 is already 82.

    And I don't understand why your Eid5 is shown as 85 instead of 82

    Anyways we can revert back to 82 since idpset only replaced the plain string (which isn't a big deal) your encrypted eid5 is still original because there's no way to reencrypt eid5 so far due to missing keys and seeds

    So Don't worry about eid5 anymore until we fix your issue with BD


    Sent from my iPhone using Tapatalk
     
    Last edited by a moderator: Jan 23, 2017
  15. 24
    4
    32
    Gehirnstaub

    Gehirnstaub Member

    Joined:
    Jan 18, 2017
    Messages:
    24
    Likes Received:
    4
    Trophy Points:
    32
    So any other solutions that could work with the BD?
     
  16. 7,606
    5,756
    872
    kozarovv

    kozarovv Super Moderator

    Joined:
    Nov 8, 2014
    Messages:
    7,606
    Likes Received:
    5,756
    Trophy Points:
    872
    Home Page:
    Please don't post here your full IDPS. Someone can stole it.
     
    STLcardsWS and Gehirnstaub like this.
  17. 24
    4
    32
    Gehirnstaub

    Gehirnstaub Member

    Joined:
    Jan 18, 2017
    Messages:
    24
    Likes Received:
    4
    Trophy Points:
    32
    omfg thanks for this. Totally forgot it...
     
    kozarovv likes this.
  18. 7,606
    5,756
    872
    kozarovv

    kozarovv Super Moderator

    Joined:
    Nov 8, 2014
    Messages:
    7,606
    Likes Received:
    5,756
    Trophy Points:
    872
    Home Page:
    Joonie doesn't he need to correctly dehash first? By double 3.55 ofw FSM install?
    EDIT: Also if you are from Germany try to read this: https://psxtools.de/index.php/Thread/69121-CECHH-Remarry-verheiraten-schlägt-immer-fehl/?postID=638362#post638362

    But please remember that you are working on DECH ps3 so with any move wait for @Joonie or someone smarter than me to confirm. :)
     
    Last edited: Jan 23, 2017
  19. 24
    4
    32
    Gehirnstaub

    Gehirnstaub Member

    Joined:
    Jan 18, 2017
    Messages:
    24
    Likes Received:
    4
    Trophy Points:
    32
    There is nothing useful. He just describes his Problem (almost the same problem, but his BD Drive can't even read discs, my Drive can play Games) but there is no solution.
     
  20. 3,107
    3,117
    372
    Joonie

    Joonie Developer

    Joined:
    Oct 15, 2014
    Messages:
    3,107
    Likes Received:
    3,117
    Trophy Points:
    372
    Location:
    Southwest US
    According to some reports, 8002997F is related to aacs (I 'm not convinced ) what's the movie title you tried?

    I know you tested it on REBUG 4.78.2
     

Share This Page