Stuck in 3.55 Rogero Downgrader..HELP!

Made a mistake when downgrading...I didn't QA flag... and now I am stuck in 3.55 Rogero downgrader. I was in 4.82 cfw Ferrox and then installed the downgrader...I have 3.55 cfw as of now and when I try to open a homebrew after installing it I get a black screen. I've tried a variety of different solutions and none have worked. The system has a non working bluray that is not installed. I can't get online because it's stating there is a dns error of which I have never come across. I tried to access ps3xploit and the page doesn't work. I've tried several cfw's from different sources and all I get is error codes and or the data is corrupted when the files are working fine. I've even tried as a last resort to install ofw 4.85 via online without success. Anyone, please help!!!!

 

blue ray drive board plugged in?

 

I also tried with the bluray board plugged in.

 

It's the wrong bluray board as well. My mission was to downgrade and re-marry the new drive to the ps3 cechA01.

 

I've pretty much worked for days on it and tried to take suggestions from other forums. There has to be a way to get out of the downgrader. Hmm....

 

qa flag again and boot into recovery and install?

 

When I try to QA I always get a black screen. It's really weird! I've tried Habib's QA, Rebug...etc

 

After the trying to QA flag it goes black pauses and doesn't return to the xmb screen. I have to shut the system down.

 

maybe try no bd fw, qa flag then install?

 

you don't have to downgrade to remarry you need noBD CFW to install then link any plugged board with your motherboard see this tutorial for blueray remarrying

 

he said he is stuck in the fw he is in?

 

he stuck in the fw if the ps3 boots to XMB normally he can update to any higher CFW from XMB or recovery

 

yes but he say keep getting error?

 

i think he try most of used CFW (Normal one) and he didn't ry noBD CFW @BackwoodsDee9 is this the error you see 8002F14E !!!

 

thats what i was thinking?

 

yes

 

That's not my error. I am in Rogero Downgrader cfw 3.55 at the moment. I can install software from xmb or safe mode but once it almost finishes it says that my data is corrupted. I have tried all kinds of different things to fix the issue. I try to QA flag and after I press on the app the screen goes black and I have to reset the machine. I've never come across this before.

 

Thanks @Louay for the remarrying steps. That's awesome! Now, how the hell do I get out of downgrader? I can't install any firmware at all. Ugh! haha!

 

maybe no bd fw take care of qa flag not working?

 

Bd as in bluray drive or? I am just getting back into fixing consoles again. Thanks!