Dismiss Notice

BEWARE of IMPOSTERS, posing as the PS3Xploit Members/Team:


  -PS3Xploit does NOT have a discord channel, some imposter are using one
 

  -If the info can't be found on ps3xploit.com or psx-place.com its fake
 

  -ZuKuTo / OFWModz is one of the fake names of these imposter's are using to represent the PS3xploit team.

 

 

Warning on ROS1 HASH, Slim NOR

Discussion in 'Ps3Xploit [Official Forum]' started by yopichoi, Apr 11, 2018.

  1. 2
    2
    7
    yopichoi

    yopichoi Forum Noob

    Joined:
    Apr 11, 2018
    Messages:
    2
    Likes Received:
    2
    Trophy Points:
    7
    Hello everybody,

    I just got a PS3 for the first time, so I'm new to the scene and I found out about Ps3xploit and decided to try it. I've followed the steps and patched with Success using the FileWriter, so the next step was to dump the NOR Flash and verify it using checker.py, but it returns a Warning.

    The instructions say that if there are errors/warnings on both ros0 & ros1 there's risk of bricking the console, so could you please tell me if it safe to restart and install a CFW or if iI should do something else?

    Here are what I believe are the relevant lines:

    ******* Checking CoreOS_region *******
    009.01 ROS0 Header : OK
    009.02 ROS0 Hash : OK
    Size = 0x6FFFE0
    MD5 = 4674CA6C38D45171F45C48191528E36F
    Version = 4.82 CEX Patched (PS3Xploit v2.0)
    009.03 ROS0 unused 0xFF Filled Area : OK
    009.04 ROS1 Header : OK
    009.05 ROS1 Hash : WARNING!
    Size = 0x6FFFE0
    MD5 = 1A1E502AAE7609C7E851BD2366FF76BF
    Version = (unknown)
    009.06 ROS1 unused 0xFF Filled Area : OK

    Total number of checks = 156
    Number of dangers = 0
    Number of warnings = 1
    Following check(s) returned a WARNING!
    009.05 ROS1 Hash
     
  2. 7,846
    6,526
    647
    bguerville

    bguerville Moderator

    Joined:
    Feb 25, 2015
    Messages:
    7,846
    Likes Received:
    6,526
    Trophy Points:
    647
    Location:
    Earth
    If you get either ros0 OR ros1 valid with PS3Xploit 4.82 detected then the patch was successful, you can reboot & install the 4.82 cfw of your choosing.
    If the dump isn't validated by the tool, both ros have warnings/errors or ps3xploit doesn't get detected on working ros, do not switch off your console & post to get further guidance.
     
    VTSTech and esc0rtd3w like this.
  3. 2
    2
    7
    yopichoi

    yopichoi Forum Noob

    Joined:
    Apr 11, 2018
    Messages:
    2
    Likes Received:
    2
    Trophy Points:
    7
    Thank you very much bguerville. I found out another post with a similar question and you answered there too, so I apologize for making a post with a similar subject.
    I restarted and installed REBUG 4.82.1. REX and the PS3 seems to be working fine.

    Thank you again!
     
    esc0rtd3w and bguerville like this.
  4. 223
    223
    72
    VTSTech

    VTSTech Member

    Joined:
    Apr 8, 2019
    Messages:
    223
    Likes Received:
    223
    Trophy Points:
    72
    Gender:
    Male
    Home Page:
    Just had the same question. Found my answer here :)

    [​IMG]

    [​IMG]
     
  5. 1,193
    1,206
    272
    littlebalup

    littlebalup Developer PSX-Place Supporter

    Joined:
    Oct 16, 2014
    Messages:
    1,193
    Likes Received:
    1,206
    Trophy Points:
    272
    Location:
    43°36'16.0"N 1°26'36.1"E
    Last edited: Aug 16, 2019
    DADi590 likes this.

Share This Page