Recent content by jetuaime81

I got it. 47 ohms.

Hi everyone, I want to know this resistor value on sae-004 ps4 slim motherboard. https://youtube.com/shorts/ioO8PjarQQI?feature=shared Thanks in advance

2 second beep could indicate power supply issue as well. when the console beeps it sends about 4V to the power supply to give 12V and if the power supply doesnt provide 12v console turns off. 2nd possiblility is the motherboard is not sending voltage to psu to turn on 12v. the acdc_stby pin is...

I had this problem in mine in my case it was a small smd capacitor that had shorted. Replaced it and it worked fine.

The ps4 power supply has 4 pins Vin (4.8v), gnd, acdc_stby and acin_det (4.8V). Both the 4.8V Vin and acin_det should be present on a working powersupply and when you plugin to ps4 motherboard, an initialisation occurs (for about 2 seconds). Then when you press power button, i believe the...

i believe yours is a 70xx series so can you please give me the values of these 2 resistors please. Also a very close up photo (macro shots if possible) of the area behind hdmi port please i am missing some components...

What do you mean by calibration exactly? how is it done?

I managed to knock off some components (i know, thankyou:angel:). please help identify them. some of them i got inputs from elsewhere but that was from a slim motherboard so im not so sure. If someone could identify all 5. thankyou 1- no idea (near the 4 pin connector going to psu; should be a...

Depends on your luck. What if you fry your chip before you could make a dump? The procedure to convert from 5v to 3.3v on the data lines of ch341a is very simple, just lift one leg and connect 2 wires right. I advice you to do it.

posting your dump in public?? goodluck

http://www.psdevwiki.com/ps3/CFW2OFW_Compatibility_List In this method, only games with update (thats patch) will work. And in those too (even if there is patch) some dont work and some have special things that need to be done to make it work. The above link shows most of the games and their...

I was just testing it out when i got hands on a superslim, out of pure curiosity; i have tried DTU before. Since the injection is done on PC, I really thought it would be at usb or sata speed (or atleast 50MBps so a 500gb data takes around 3 hours). But 400gb injection took 11 hours, restoration...

is the ps3xport tool slow? I was just trying to inject 300gb backup into a 500gb hdd and its been like 8 hours now and still at 80%. I am using a desktop and the backups are in a 2TB desktop hdd. External usb 3.0 hdd case with tested write speeds around 60 to 80 MBps most of the time. Its...

i only get audio problems when i switch to another tv, never had a problem otherwise. restore default settings fixes that everytime. as for the corrupted data, i have frequent problems with ftp (timeout etc). i use usb drive to transfer files as it is faster and error free. and yes god of war...

thats amazing. good job.