Recent content by PSXCON22

So, i will sum up all the informations that you (and sandungas) shared with me: So in order to proceed a syscon remarry, you need 2 identicals PS3 mainboard (COK-002 for my purpose): -One, the receiver, that will receive the new CELL CPU -One, the donor, that need to have a intact CELL CPU and...

Yes, i see this file in this thread: https://www.psdevwiki.com/ps3/Downgrading_with_linux. And i used the PS3 PUP extrator v1.0 software to extract this package (+/- 4.5 Mo) from the 2.43 PUP Ok, so i thing that you make a reference to ros0 and ros1 situated onto the ros section of the NAND...

Sorry for this one, i saw that i confused your 2 videos when i write my reply, i will make a correction on my previous reply. Maybe i will find a BD3504 on a DIA or SEM mobo revisions of a fat PS3 or VER for a slim one ? Ok, i take your advice. But before doing it, i need to sucessfully...

First, many thanks for your reply, your clarified many things!^^ I thing that is the wisely thing to do (and the only option available), and now one of my goal. Even if finding one of those is like finding a needle in a haystack >< So the ros is where the main data of the firmware is...

Ok, so the JIG file is parts of this 2.43 release: https://www.psdevwiki.com/ps3/2.43_CEX ? and this JIG file allow the PS3 to be put in a special service mode ? this particular Service mode needed to perform the remarry ? Ok, i will perform the repair in this order. Ok, so NOW i understand...

Ok, so i took my time and rewatch all your videos (and the links that you shared) in the purpose to better understanding your explanation. So i've understand that i confused many thing :/ First one, i confused the FlexIO VDD voltage modification (step 2 both for the FK and OB mod) and the...

So i need to flash this jig pup (2.43 CEX) into the nand of my PS3 in order (at least is the first step) to perform the remarry between a news CELL and my current mainboard. Ok, but with that fact, i've several questions: ^^ First one: all the tutorials that shows how to "downgrad" the...

Sorry, that i doesn't used the correct word, i thought that you also use alimentation for power supply :/ I've don't understood what you've tryed to explained, sorry for that :/, but now i think that i get it. So the modifications intented for the motherboard (the step 3 of both orbis and...

I understand that if we perform a RSX swap between a 90 nm chip, that need a VCore of 1.2, and a 40 nm one, that only need 0.95 v, we have to modify the alimentation rail as i don't think that the RSX/GPU have (as his PC counterparts) , an adaptative alimentation mode. But, i don't thing that...

Hi, thx for the answer. i believe that this project is a good challenge for me, and it will learn me a lot of stuff about modern electronics ^^ i want to exit my confort zone with hadware stuff ( i'm used to restore the old console) ^^ And i plan to make a tutorial (if i successfully repair my...

Hey there, first thing first, many thanks for your answer: So, if i unterstand what you said and shared (sorry i'm a noob ^^ i'm much more familliar with C programming and PC stuff), a JIG is more or less a service mode for the PS3 ? and need to be activate via a command prompt? And a .PUP...

Hi, thanks for your answer. You right about spare parts, i thinks that i need to find some donor console such as CECH-3XXX, with deffective hdmi port for exemple, to perform the RSX mod Unfortunably COK-002 board become pretty rare to find here in France. But VER-001 and DIA-002 board are much...

Hi, thank for your answer and if you are the youtuber "Artificial" thanks a lot for your video ! it help me a lot in my project!! I've seen your comparative video beetween the Frankenstein Mod and the Orbis Mod: you concluded that the orbis mod is easier but the frankenstein is maybe more...

Hey there^^ (thx for the answer) as i said to elgris, is a passion project ^^ i already have an other CECHC04 and a CECH3004B but i feel a little bit guilty that i've damaged this one. And as a retro-console collector and restorer, i want to preserve all the unique console that have a great...

Hi, thx for your answer ^^, For this project i'm just interrested to restore this particular model of console because it's a good challenge for me ^^ I've already an other working CECHC04 and a CECH 3004B in my collection but i feel a little guilty that i've damaged this one. I'm used to restore...