Recent content by TYRANT

That's what I feared, all the clues point there. I am undecided whether to try to reball or not (high price and unsecured result). For now i put it aside, and play with the other one that is still working. I want to thank all the users who have provided me with support (and endured :smile new:).

Already tried with clearerrorlog, but same result. The strange thing is that i have tried some other commands, but everytime i got the same response at the end: >$ bsn F0000003 # [SSM] PS3 ok. # [SSM] PS4 ok. # (PowerOn State) OK 00000000 #! #!Boot Loader SE Version 2.4.5 #!(Build ID...

Yesterday when i used the bringup command i forgot to fix properly the board to the cooling heater with the screws. When i used the bring command the console started and then shut down after about 30 sec. I thout it was a normal procedure fot that command, because when i dumped again the syscon...

I extracted the syscon log again after the bringup command: >$ errlog 00000000 # [SSM] Shutdown Start. # [SSM] Shutdown ok. # (PowerOff State) # CODE CLOCK # A0801200 0B649DEC # A0802124 0B49D81F # A0802124 0B49D81F # A0801002 0B49D81E # A0802124 0B49D801 # A0801002 0B49D800 # A0802124...

Here the results oth the commands bringup, powerstate and becount. >$ bringup 00000000 # [SSM] Bringup Start. # [SSM] PS0 ok. # [SSM] PS1 ok. # [SSM] PS2 ok. >$ powerstate 00000000 # [SSM] PS3 ok. # [SSM] PS4 ok. # (PowerOn State) OK 00000000 #! #!Boot Loader SE Version 2.4.5 #!(Build ID...

Hi RIP-Felix, i have tested my 2 boards like you suggested me (comparing all the values). I didn' found short or oper circuit. Also i retrieved the syscon using your guide. Here the results (first before nec tokin replace using PS3 Advance Toolstet) Firmware Version: 4.84 (build 50696)...

In this days i will try to get the syscon error log using your guide and inspect all 2 board to see if there are some missing parts on mine. To check the voltages is necessary that consoll is on or is ok also in standby? I ask this again because if i have to test the voltages with the console...

I didn' used a heat gun to remove the nec tokin. I used a kinfe to remove them as kindly as possible For the last one i accidentally hit a small smd that i resoldered and tested the connections with a multimeter (it seems ok). I used 4x470Uf 6V tantalum capacitor for each nec tokin (total 32)...

Hi RIP-Felix, you are right, i made confusion with my posts. Sorry for that. I restart to explain from the beginning. I have ps3 fat CECHL04 with VER-001 board. My ps3 start after 2 or 3 tries at the beginning (i pressed start but it immediately turned off). When i was arrived at the xmb i...

Hi, on my ps3 i got error 1002 (and 2124), so i changed the nec tokin with tantalum capacitor, but still having error 1002 (and 2124). Also the console torn on but i can't see nothing (already tried button reset procedure). I want to test with multimeter and oscilloscope the Vddc line for RSX...

Thank you very much.

Hi everyone, i have 2 ps3 (both CECHL04). One have some problems and i'm trying to fix it. On the second ps3 is installes 4.88 fw with hen (this console was gifted to me by a friend). I want to go from hen 4.88 to cfw rebug 4.84. Is there a guide to procede correctly? Thank you.

I tried to see the vlotage in standby on the nec tokin position (using a multimeter) but result 0 V. All the voltage can be measured only when the ps3 is turned on (green led) right?

My ps3 didn't start well. I got the syscon were i had errors 1002, 2022 and 2124. Than i replaced all 8 nec tokin from the board. Now the ps3 start but i cant see nothing on both av and hdmi out. Also the pad can't connect. I tried to reset ps3 out by pressing the power botton but i still don't...

Hi everyone, i have a ps3 CECHL04 with a VER-001 board. I'm searching for the boar service manual with schematics. I can't find anything everywere (i just found for COK-002 board if someone is interested). Can you help me to find this schematics? Thank you very much.