Recent content by zoiasso

How you run game without bd and bt. I tried installing nobd nobt cfw, but multiman won't load games.

Ok, yesterday i replaced both rdram and nothing changed. Today i opened the 2nd console and it had the exact same 2.67v on rdram and 2v on RSX_FBVDDQ, so i considered this normal. So i jumped into reflowing EE + GS on the 2nd unit, and the ps2 logo came up. I didn't stress test or anything...

interesting, but i need the blu ray drive connected to insert a ps2 game to start measuring. Ps2 voltages only engage when you start it.

Yeh, but that 2.66V is beyond the max voltage accepted by rdram, i tried replacing the regulator (ic6607), but nothing changed, im getting 2.67 volts there. The datasheet for rdram says the max is 2.5 +/- 0.13, also the datasheet for the regulator says min/max of 2.45 to 2.55, all the other...

about the balckscreen on ps2 games https://imgur.com/a/gpQ48xz i did some measurements today, tomorrow i will double check on the exactly pins u said. Based on this chart (https://www.psdevwiki.com/ps3/images/9/90/COK-001_Power_FlowChart.jpg) I should have 1.8v on that inductor, but im getting...

someone has voltage readings around ee+gs and rams of a good working cok 001 board? Obs: when you dont have bluetooth board connected, you won't be able to sync the controller on ps2 via usb on that black screen so you won't get XMB back, i don't know if that's what happned to the other guy you...

Will try some measurements as soon as i find a good way to probe around with the board turned on. Will try to use ps2 schematics for troubleshooting. My idea now is also to buy a working ps2 and replace everything if im not able to sort it out. Do you know which ps2 board is "compatible" for...

So there are 2 boards. Let's call them X and Y: On X that is the currently board i was talking about, i bought it with YLOD, sealed. Checked with oscilloscope, huge ripple on RSX. Placed few tantalums with iron solder to not cause bad diagnosis (i don't apply heat on the board by any means...

https://streamable.com/e4kdmq

Someone can help me? Im trying to diagnose 2 cecha ps3 that are giving me blackscreen when trying to load ps2 games: - ps2 logo won't come up, but i can access xmb pressing PS button and "quit game" I replaced ps2 bridge cx9208, nothing changed. Kinda hard to diagnose cause im not able to keep...

Ok today i was giving a look in my cecha00 that has the same problem, if i find any solution i will reply here, What's making hard to diagnose is the fact that i can't probe it while turned on due to the design of the console.

Not yet, i have 2 consoles with the same problem and 2 working right now, i will dig into it soon and try to solve. Can you tell me if you changed anything on your ps3 (hardware or software) before the problem started? Both of my ps3 had hardware changes, one i replaced gpu (RSX), and the other...

same thing. Also tried on 4.86 OFW and same thing

1 - Picture with games tested. 2 - Video showing the symptom: In the video i show in 2 different ways. 1st without ps2netemu 2nd with ps2netemu

Can you tell me what's a ps2 classic? When i just run the disc directly i get the black screen with ps2 menu, and im able to quit back to XMB menu. When i Force netemu via rebug toolbox, I get a blackscreen with freezed console and need to shut it down on the power switch. If you have any...