syscon error codes

Hello, My friend recently got into ps3 repairs and decided to develop a proper GUI for the syscon python script we've all been using. It provides proper interface for error codes reading, RSX patching and makes it easier to enter commands. There are many other options, you can check the full...

Hey guys i tried swapping switch button and psu nothing helped only got to bring it up through uart and it shutsdown after cpu heating up with XDR error as you can see in the codes the board was missing a hdmi encoder and interface which i replaced but nothing changed >$ errlog 00000000 # [SSM]...

Looking at the SYSCON log of my 2004 Slim, I noticed many A0802022 errors and I think I've discovered the cause. Each time I launch a PS2 game (ISO file with PS2_netemu), a new A0802022 error will pop on the log. Same when I exit a PS2 game. Firmware Version: 4.91 (build 50754) Platform ID...

Hi guys. I have an old computer that has uart port on it. Can i use it to talk with syscon chip? If yes can you guys provide pinouts!

'Ello, i recently watch felix video about the led diagnostics mode, thing is i did it with my ps3 and the error it gave me was 5FFF or A0805FFF (im not sure if they are difertent or something) and i couldn't find information about that error syscon code anywhere, me guess is a RSX thing cause...

My PS3 list this code (A0404421) repeating... ( no 3034 error code only the 4421 ) anyone tell me what this means and what to do?

Hello to all, I am looking some assistance with syscon and getting my system back up and running. Following syscon guides on youtube, I tried connecting jumper wires via soldering to my cok-002 RX and TX which worked, however the temperature was too high and ripped off the pads. Is there another...

Hello everyone I got my hands on an CECHC04 PS3, flagged as "faulty lens", won't read discs. The warranty seal wasn't tampered, the console was sold as it. On the original hard drive smart, I saw that the console has only 145 days of use, for approximatively 500 power/on off. First, when I...

bringup 00000000 # [SSM] Bringup Start. # [PowSeq] Error:A103 # [SSM] PS0 ng. # [SSM] Cond/Fatal received, msg=24D0. # [SSM] Fataldown Start. >$ errlog 00000000 # [SSM] Fataldown ok. # (PowerOff State) (Fatal) NG E00000E0 # CODE CLOCK # A0093004 FFFFFFFF # A0093004 FFFFFFFF # A0092114 FFFFFFFF...

Hi guys! I have a slim PS3 with the board number "DYN-001".I hooked up my syscon chip and I got 2 errors. Can someone explain those to me? The errors are: 1) A0801701 (BE Attention) 2) A08014FF (Check Stop) Any help is appreciated.

Hey All, I have connected to the syscon chip (SW3) on my super slim to retrieve the error codes... Many thanks to NSC and Paco btw!!!... but I can't find any list to understand the errors I have retrieved from the log.... Anyone know where I can find that info? Thanks.