PS3 Slim CECH 3004A turns off after about 45s.
The errors that put it down are sometimes 1601 and 1701 combined,
and sometimes 5FFF (seperate).
If i let it run without the heatsink on it(to overheat it) than shut it down and start it again than it doesn't shoot
any errors,stays on, but still shows no image.
No image on screen in any case.
I have checked the voltages on the inductors near the RSX and CELL and
they seem fine. The voltages are stable until it shuts down.
I Would like to diagnose it correctly before doing anything super invasive.
Big thanks!
The errors that put it down are sometimes 1601 and 1701 combined,
and sometimes 5FFF (seperate).
If i let it run without the heatsink on it(to overheat it) than shut it down and start it again than it doesn't shoot
any errors,stays on, but still shows no image.
No image on screen in any case.
I have checked the voltages on the inductors near the RSX and CELL and
they seem fine. The voltages are stable until it shuts down.
I Would like to diagnose it correctly before doing anything super invasive.
Big thanks!
