Recent content by Djudju

Hello everyone, I'll let you know about my CECHK. I waited a little over a month because some had predicted that in general, this kind of repair (nec tokin) lasts on average about 15 days. In conclusion, I tried uncharted 3 for about 2-3 hours with no problems. Assassin's creed 1 about 25 hours...

Good evening, thank you for these very technical and relevant explanations. where is the option to clear the error log, yet I had understood that it was possible to do this only by the adapter via python? Thank you

Hello, no I don't have an oscilloscope so indeed it's a bit blind but not completely because as I said, before any manipulation, I test the hair dryer and if it starts there chances are it's a nec tokin problem. And then I run the syscon error log which gives me the codes 1001=CPU and 1002=RSX...

Hello everyone, I'll let you know about my nec tokin capacitor repairs. My repairs on my CECHL failed. By wanting to remove the 6.3 v capacitors to replace them with 2.5 v, it no longer worked. I soldered in different ways but nothing changed. After a while, I lost my patience and banged the...

Hello Timbo, yes it has already been repaired since I had already changed the nec tokins with tantalum but it still went out but after 30min-1h, so I wanted to replace the caps with others (2.5v) but now it's direct ylod in 2sec.

Hello Works, thank you for your response, in fact I unsoldered the caps (2.3) to put back the 6.3 v. I resolder several times (5 times), and now it doesn't work at all, direct YLOD. I only removed the circled caps. Those of the cell I have not touched. I don't understand, I may have damaged...

Hello everyone, I started replacing tantalum 6.3 with 2.5 on the rsx. Result: it doesn't work anymore, I checked my welds and despite that it still doesn't work. to be continued

Ah yes, sorry I had not seen that the link only displayed the 330uf but I also have the same in 470uf.

16 for the cell? You told me in your previous message that 3 per nec (470) was enough? So 12 would suit me because otherwise I don't have enough :biggrin2:. Anyway thank you very much

Ok Workz, thx. panasonic are hard to find in france. It's a shame I received these today: https://fr.aliexpress.com/item/1005001849615221.html?gatewayAdapt=glo2fra&spm=a2g0o.order_list.0.0.3d515e5bLJ4IWc Maybe they're better than the ones I put (6,3v) right?

Allright Marciolsf, thx

Ok thx Felix

Hi everyone, thanks for your response. I did something like this (it's not my console, image that comes from the net), but they are the same tantalums (rsx: 2 x 108 & cell: 128). I also wanted to do those on the other side but it's more difficult, there are lots of capacitors next to it, so...

Hi, my last error log is : Bringup Count: 3664, Shutdown Count: 3613 Runtime: 220 Days, 20 Hours, 11 Minutes, 48 Seconds Error Log 01: A0802124 Fri Jan 20 23:22:37 2006 02: A0801002 Fri Jan 20 23:22:36 2006 03: A0802124 Fri Jan 20 22:35:07 2006 04: A0802124 Fri Jan 20 22:35:07 2006 05...

Ok thx, But precisely it is to see if replacing the nec tokin automatically erases the errors