Recent content by playerkp420

If it's on DEX it will show minimum version the console can take. So I'm guessing it's a CECH-25xx model. I would make sure there is no disc in the drive. Then try a D-REX pup.

Found this updated version on github, if anyone is still playing with this: https://github.com/zecoxao/ps3mfw-builder-0.2.1-mod

Have you tried OFW 3.55? 0x8002F157firmware related error / HDD Exchange error - 3.56-1st BUG. Also happens when you try to Upgrade from 999 Downgrader to another Non-999 CFW. Go to OFW 3.55, then upgrade to the other CFW

Sometimes the remarry screen will go very fast and you might miss it if you blink. Try playing a blu ray movie disc while in still in FSM to restore DRL/CRLs. If it isn't working. Try another USB stick and be sure to format to FAT32, and have all the files on it. Don't forget to rename the...

The BD is still working? Plays discs, and you are able to open apps and psn games normally? I would double check that the drive is fully operational. All contacts on both ends of ribbon are good. If any are sketchy, snip with very sharp scissors so contacts are even. Cut business card and...

Update error0x8002F14EError with installing Firmware update. (BD)Drive not found or disconnected. // or CoreOS region failure when in log "Update Core OS Package done(0x8002f14e)" or Revoke region failure when in log "Update Package Revoke list done(0x8002f14e)" If it is not from the BD being...

Log into gateway and find DMZ. Put your PS3's local IP address. If your equipment has DMZ. Best describefirst.

I have had a couple super slims. CECH-4001C and CECH-4201C both had NOR chips. I made a youtube video of dumping the NOR Flash with E3 Flasher.

You are using Flowrebuilder 5 or newer, correct? It will remap the bad blocks, if they are real. If the bad blocks are from not reading properly, you need to investigate your setup. I have never used that programmer. But maybe investing in a $20 Teensy 2.0 will solve your problems. edit - I...

So try and install latest rebug rex from rebug.me. Make sure the BD is connected properly. Make sure you have the daughter board that was originally in that ps3, connected to the known working BD you want to use. Then you won't have to marry anything, and won't have to mess with any noBD CFWs.

Link works for me. Try another browser. Or try my mediafire link: http://www.mediafire.com/file/j1w0qbmdwck98pk/9.99_MLT_3.55_NoBD_PS3UPDAT.PUP/file

If the BD worked before installing a noBD CFW. Updating to a CFW that doesn't have the bluray firmware removed should make it work again. But if your going the route of marrying a known working BD. You might want to make sure your WiFi/BT module is connected properly first. Update error...

So basically you want to be able to enable qa flag. So you can update to a 4.82 noBD CFW, correct? Then install this: https://mega.co.nz/#!2wNjUZ4b!6VaAMs0aT-2bZaCi1ChHGO30Dv1nmbBTWjXaJpsLI7w After that is installed, install toggle qa flag pkg, and run the app. Reboot the PS3 once and...

ROS headers look ok? I can double check the dumps for you if u want. The PUP you built works on other PS3s? I've made some minvercheck pups by accident before, LOL. All those errors are "Error with installing Firmware update. The PUP is not recognised as valid update." The 8002F2C5 adds...

He means 4,10 is your PS3's minimum version it can have. But doesn't matter because you can't downgrade it at all. Use the e3 flasher to get identical and valid dumps. Patch dump to latest OFW and write back to NOR. Reinstall latest OFW from USB drive. Then your PS3 should work again like...