FMCB Memory Card Labels??

Berion said:
There is nothing to apologise. I saw thread about Memory Card labels where You just asked about some custom one, You made one, so I think I could to try something. I do not see anyhow this thread to be for Your and only Your labels. But if You want to stay that way, I don't have nothing against it.

Also I do not trying to discredit You, because this would have no sense... And that's is interesting BTW. I'm pretty sure those dimensions are bad (after You will print them, You will get blurry stuff). Are You using Photoshop? My is CS6 and shows me correct values (for sure it dynamically properly scalling because I have use it several times for DVD and disc covers, and proportions for this case looks for me proper).
Click to expand...


This is CC 2020, and these are the correct dimensions. You must be picking some wrong option for it to be giving those values. I've made some mis-clicks myself trying to change units to millimeters (from the default measurement value of pixels) and it did the same to me. I fixed those mistakes because they ended up resizing some of my shit.... But yeah, these dimensions are correct, I assure you. If you'd like to test it, feel free to print it out and see for yourself.

I don't mind if you post more, friend <3
 
Could You do favour for me and opening below PSD in Your PS and tell me what it says about size? I don't understand why we have different resolution with the same DPI and the same size in mm (well, to be precise, my is 18mm, not 19mm but that's of course is not important for this case).
 

Attachments

Berion said:
Could You do favour for me and opening below PSD in Your PS and tell me what it says about size? I don't understand why we have different resolution with the same DPI and the same size in mm (well, to be precise, my is 18mm, not 19mm but that's of course is not important for this case).
Click to expand...

You have this set to 300 pixels per cm, not pixels per inch :3 That's probably the cause of our discrepancies.
 
What we cant afford is to print that labels in a 100% plastic material :D ...or maybe you have a printer that can do it ?
If you print them in "single side adhesive paper" eventually are going to be degraded, because the "user" is going to be touching it constantly (and the natural humidity and grease from our skin will decompose the vegetal fibers)
Not sure, i have not printed stuff since years ago, lol (i went bored of that instruments of the demon named printers)... but maybe there is some nice sheets made of 100% plastic you could use

About the size... you need to decide if adjusting it very close to the borders (and cut the corners with scissors)... or keep a gap with the borders (and dont cut the corners)
 
Last edited:
Printers which printing above 600DPI and accept various of materials like i.e "sticker paper" are quite expensive. Of course lower grade printers accept the file but hers software will downscale it; and depend how it was written, results can be acceptable or even horrible (besides *RGB to CMYK conversion).
 
I think using a A4 size label paper and ordinary ink jet printer will do the job just fine.

Ive done it several times on other stuff already (mainly mail labels and stuff)
 
I guess it could be made with standard paper + plastic tapes, this way (from top to bottom)

-Single side adhesive film (and transparent)
-Standard paper
-Double side adhesive tape
-Memory card

This way you are creating a "sandwich" of plastics with the paper in the middle of them
 
Noxillio said:
Does anyone have the image used for those nice-looking memory card labels? I've looked everywhere for ages and haven't found it. It's driving me nuts because these people selling them must have it and must have found it somewhere. Please help :c I want to make my own

s-l1600.jpg
Click to expand...

I found some nice ones in this thread
 
You must log in or register to reply here.

Similar threads

Back
Top