FreeDVDBoot - Black screen after loading FreeMcBoot Installer .elf file

[MM7890]

Hi. I have a PS2 Slim SCPH-90001 with 3.11U DVD Drive. I was able to burn FDVDB onto a DVD-R and launch FMCB from a 128 MB USB Drive (FAT32, MBR). Every time I try to launch the FMCB .elf file from the USB, it only shows a black screen, nothing else. Even waiting a bit doesnt help. What am I doing wrong?

​

 

[Checkity_CheckYoSelf]

Hi. I have a PS2 Slim SCPH-90001 with 3.11U DVD Drive. I was able to burn FDVDB onto a DVD-R and launch FMCB from a 128 MB USB Drive (FAT32, MBR). Every time I try to launch the FMCB .elf file from the USB, it only shows a black screen, nothing else. Even waiting a bit doesnt help. What am I doing wrong?

​

Don't use Free DVD Mcboot. Flash the pre-built image to your HDD, then plug and play and follow rest of instructions by Mr. Mario's guide.

 

[arcadekidflo]

Launch ESR.ELF or OPL.ELF , these are the ones you need . FMCB will not work on 90001 . If still get a blackscreen you should try another stick .

 

[MM7890]

Don't use Free DVD Mcboot. Flash the pre-built image to your HDD, then plug and play and follow rest of instructions by Mr. Mario's guide.

Where do I find the pre-built image for my USB?

Launch ESR.ELF or OPL.ELF , these are the ones you need . FMCB will not work on 90001 . If still get a blackscreen you should try another stick .

Where do I find ESR and OPL.elf?