PS2 G-CON 2 and RGB connection

[davidgrohl]

Hi all,
I'm using a PS2 FAT with internal HDD, OPL installed and freemcboot.
I'm from Italy so my console and my TV are PAL. I generally use a RGB scart cable to play NTSC games with colors and full screen. The problem is that I want to use G-Con 2 and it requires the component connection. Any idea on how can I pick that signal and connect the gun?

 

[Kevstah2004]

The PS1 had adaptor blocks that you could put on any cable as an extension not sure if they worked on the ps2 also, you can get an all in one cable that outputs the composite video or use an scart to composite/left&right-audio splitter.

https://en.m.wikipedia.org/wiki/SCART
Pins 17-20 if you want to mod your current cable.

 

[davidgrohl]

The PS1 had adaptor blocks that you could put on any cable as an extension not sure if they worked on the ps2 also, you can get an all in one cable that outputs the composite video or use an scart to composite/left&right-audio splitter.

https://en.m.wikipedia.org/wiki/SCART
Pins 17-20 if you want to mod your current cable.

Hi @Kevstah2004, I build a scart board splitter:
https://ibb.co/n8DVjxVq
but i cannot see anything on tv. Can you explain how can I mod the cable?

 

[Kevstah2004]

Hi @Kevstah2004, I build a scart board splitter:
https://ibb.co/n8DVjxVq
but i cannot see anything on tv. Can you explain how can I mod the cable?

https://www.skooterblog.com/2013/05...uncon-rgb-cable-with-audio-and-guncon-output/

As far as I know your just coming off ground & composite for the yellow gcon connector, it should work in series with the gun.