Hello newcomer to the ps3 modding scene, needing help with syscon diagnostic

A

ascendantprime

Forum Noob
I managed to resurrect a ceche01 ps3 from ylod with my hot air station a couple weeks ago and did thermals, and installed hen and eventually evilnat and was getting random crashing during anything intensive with the 3 beeps and i figured it was overheating still and maybe nec tokins are bad, so i delidded a couple days ago and replaced paste under the ihs on the rsx and cell, and it started running great and i could play ps3 games and ps2 games for longer than like 30 mins, it crashed again a couple days ago, thought nothing of it and today i tried booting so i could dump syscon logs to properly diag, and it was ylod again, so i pulled it back apart and reflowed it again(this time with flux i have no idea why i didnt the first time) but i did it without the ihs on both the cell and rsx and so far it is working great.

long story short i dumped the syscon logs and now it is showing me signs not only the rsx is failing but also the nec tokins are failing with 1001, 1002 and also 3034 and 4421 codes, but im also confused as its showing as 2006 being when the codes where thrown, it is a free console that was dead since 2012, should i pray it lasts longer this time, and should i even look into fixing it rather than just get a slim and mod it if both the rsx and tokins need to be replaced? should i wait for it to ylod again to hopefully get a better log? replacing the rsx and tokins are something im capable of doing and have the tools i need like bga rework station at work and all the other soldering stuff i need here at home, but i cant even find 40 or 45nm rsx chips and i dont wanna murder good consoles if im gonna need to spend another 80 bucks on capacitor tantalizer boards. full logs in picture. thankful for any tips yall have.


1778721642474.png
 
Flux was a good move, but the big thing to understand is this:

Without a real preheater, board support/jig, controlled thermal profile, and actually taking the solder into a true liquid state, you're not really doing a proper BGA reflow. You're mostly heat-cycling the board and maybe temporarily restoring a bad connection.

"Reflow" just means bringing solder back to a liquid/wetting state so the pads and balls reconnect properly. That can apply to anything on a PCB — an SMD resistor, capacitor, BGA, RSX, Southbridge, etc. Flux helps reduce oxidation and helps the solder wet the pads, whether you are reinstalling the existing RSX or attaching a new one.

The problem is, with a launch model 90nm RSX, repeated hot-air attempts usually turn into a loop: it works for a little while, crashes again, then needs more heat, and each heat cycle makes the PCB, BGA pads, substrate, and surrounding components worse. Those 90nm chips already have a poor long-term track record, so from a practical repair standpoint I personally treat the original 90nm RSX as bad once it starts showing this kind of behavior.

Technically, 3034 does not always prove the RSX silicon itself is dead. It can be BGA attach, RSX/CELL link training, board damage, or FLEXIO-related. But on a CECHA/CECHB/CECHE with the original 90nm RSX, especially after repeated hot-air revivals and the same faults keep coming back, I would not build the repair plan around trying to preserve that chip.

Flooding flux under the chip can help during removal because it keeps the pads from oxidizing while the chip is coming off. But if the chip is staying on the board, the goal is still the same: the solder balls need to actually reflow. If they do not reach liquid state, you are mostly just stressing the board. With only a hot air wand, that is very hard to do correctly and consistently.

On your syscon codes:

1001 by itself is not something I would chase as a NEC/TOKIN failure. That can be triggered by the power button / shutdown event, so I would not read too far into that one by itself.

3034 is commonly RSX/BGA/link-training related. Again, it does not always mean the RSX die itself is dead, but it usually means the RSX side has a serious connection or communication problem.

4421 can be CELL/RSX/FLEXIO related. Since you also have repeated 3034, I would be looking very hard at the RSX side first.

Before wasting too much time, inspect the RSX and CELL area closely. If the board is bubbled, warped, or the BGA site is damaged, it may not be worth trying to save. If the board looks clean, then proper RSX rework is the better direction.

With repeated 3034/4421 after hot-air "revival," I would not trust that original 90nm RSX. If this was a customer unit or something I wanted reliable, I would plan on RSX replacement first, then deal with anything else only if it remains afterward.

If you just want the console to work and actually be reliable, this is where a Frankenstein RSX swap makes sense. If you are doing it for learning, then by all means keep experimenting — just understand that every heat cycle reduces the odds of that board surviving long-term.
 
iKon said:
Flux was a good move, but the big thing to understand is this:

Without a real preheater, board support/jig, controlled thermal profile, and actually taking the solder into a true liquid state, you're not really doing a proper BGA reflow. You're mostly heat-cycling the board and maybe temporarily restoring a bad connection.

"Reflow" just means bringing solder back to a liquid/wetting state so the pads and balls reconnect properly. That can apply to anything on a PCB — an SMD resistor, capacitor, BGA, RSX, Southbridge, etc. Flux helps reduce oxidation and helps the solder wet the pads, whether you are reinstalling the existing RSX or attaching a new one.

The problem is, with a launch model 90nm RSX, repeated hot-air attempts usually turn into a loop: it works for a little while, crashes again, then needs more heat, and each heat cycle makes the PCB, BGA pads, substrate, and surrounding components worse. Those 90nm chips already have a poor long-term track record, so from a practical repair standpoint I personally treat the original 90nm RSX as bad once it starts showing this kind of behavior.

Technically, 3034 does not always prove the RSX silicon itself is dead. It can be BGA attach, RSX/CELL link training, board damage, or FLEXIO-related. But on a CECHA/CECHB/CECHE with the original 90nm RSX, especially after repeated hot-air revivals and the same faults keep coming back, I would not build the repair plan around trying to preserve that chip.

Flooding flux under the chip can help during removal because it keeps the pads from oxidizing while the chip is coming off. But if the chip is staying on the board, the goal is still the same: the solder balls need to actually reflow. If they do not reach liquid state, you are mostly just stressing the board. With only a hot air wand, that is very hard to do correctly and consistently.

On your syscon codes:

1001 by itself is not something I would chase as a NEC/TOKIN failure. That can be triggered by the power button / shutdown event, so I would not read too far into that one by itself.

3034 is commonly RSX/BGA/link-training related. Again, it does not always mean the RSX die itself is dead, but it usually means the RSX side has a serious connection or communication problem.

4421 can be CELL/RSX/FLEXIO related. Since you also have repeated 3034, I would be looking very hard at the RSX side first.

Before wasting too much time, inspect the RSX and CELL area closely. If the board is bubbled, warped, or the BGA site is damaged, it may not be worth trying to save. If the board looks clean, then proper RSX rework is the better direction.

With repeated 3034/4421 after hot-air "revival," I would not trust that original 90nm RSX. If this was a customer unit or something I wanted reliable, I would plan on RSX replacement first, then deal with anything else only if it remains afterward.

If you just want the console to work and actually be reliable, this is where a Frankenstein RSX swap makes sense. If you are doing it for learning, then by all means keep experimenting — just understand that every heat cycle reduces the odds of that board surviving long-term.
Click to expand...
WOW 10/10 fantastic explanation on those codes. sorry for responding so late i had no idea someone bit on this post. I definitely think the rsx is toast and needs replacement as it works again but sometimes takes 2-3 cycles to actually boot and will still randomly crash and ill have to unplug power etc and i definitely wont be attempting another hot air/heat gun resurrection as i am definitely scared of warping atp especially since i did it this time with no ihs on either of them. I was just more worried about having to also replace the tokins cause those nice little tantalizer boards aint cheap. I think i might try removing some rsxs from dead boards at work with the bga station since ive never really messed with it and try to find a slim/super slim to pull the rsx off of if i cant find any already harvested. do you have any recommendations on where i could possibly find harvested rsx chips? the only ones i can see are the 90nm ones cause it seems like frankensteining is a lot more popular these days.
 
Hello, I am trying to ressurrect my PS3 slim as well. It has a GLOD after replacing the HDMI port. I will attach 2 separate reports.
PS3 MODEL: CECH-2001A
Mobo: DYN-001
first code:

Code: 
Microsoft Windows [Version 10.0.19044.6937]
(c) Microsoft Corporation. All rights reserved.

C:\Users\Administrator\Downloads>pip install pyserial
Collecting pyserial
  Downloading pyserial-3.5-py2.py3-none-any.whl (90 kB)
     |████████████████████████████████| 90 kB 2.7 MB/s
Installing collected packages: pyserial
Successfully installed pyserial-3.5
WARNING: You are using pip version 21.1.1; however, version 26.0.1 is available.
You should consider upgrading via the 'c:\users\administrator\appdata\local\programs\python\python39\python.exe -m pip install --upgrade pip' command.

C:\Users\Administrator\Downloads>pip install pycryptodomex
Collecting pycryptodomex
  Downloading pycryptodomex-3.23.0-cp37-abi3-win_amd64.whl (1.8 MB)
     |████████████████████████████████| 1.8 MB 2.2 MB/s
Installing collected packages: pycryptodomex
Successfully installed pycryptodomex-3.23.0
WARNING: You are using pip version 21.1.1; however, version 26.0.1 is available.
You should consider upgrading via the 'c:\users\administrator\appdata\local\programs\python\python39\python.exe -m pip install --upgrade pip' command.

C:\Users\Administrator\Downloads>ps3_syscon_uart_script.py
ps3_syscon_uart_script.py <serial port> <sc type ["CXR", "CXRF", "SW"]> <Optional:[-l log.txt]>

C:\Users\Administrator\Downloads>ps3_syscon_uart_script.py COM3 SW
Press Ctrl+C to exit
>$ auth
Auth1 response invalid
Press Ctrl+C to exit
>$ AUTH
Auth1 response invalid
Press Ctrl+C to exit
>$ AUTH
Auth1 response invalid
Press Ctrl+C to exit
>$ AUTH
Auth1 response invalid
Press Ctrl+C to exit
>$ auth
Auth1 response invalid
Press Ctrl+C to exit
>$ auth
Auth successful
Press Ctrl+C to exit
>$ r 800 8
00000000
# +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F
# -----------------------------------------------
# 0C EF 0B B5 01 90 F3 38

Press Ctrl+C to exit
>$ powerstate
00000000
# ATA  :OFF
# PCI  :OFF
# PCIex:OFF
# RSX  :OFF
# GDDR :OFF
# XDR  :OFF
# EURUS:OFF
# SB   :OFF
# LAN  :OFF
# WLAN :ON

Press Ctrl+C to exit
>$ errlog
00000000
# CODE     CLOCK
# A0802022 1BD41E2D
# A0802022 1BD41DA7
# A0802022 1BCB2A0A
# A0802022 1BCB2860
# A0802022 1BCB2555
# A0802022 1BCB17A6
# A0802022 1BCB0CE4
# A0802022 1BCAFCB5
# A0802022 1BCAA517
# A0802022 1BCAA4DE
# A0802022 1BC9D759
# A0802022 1BC9D64C
# A0802022 1BC99A83
# A0802022 1BC9921F
# A0802022 1BC990D9
# A0802022 1BC990CF
# A0802022 1BC98FFB
# A0802022 1BC98C80
# A0802022 1BC98B90
# A0802022 1BC98B86
# A0802022 1BC98B43
# A0802022 1BC98B39
# A0802022 14E96B9B
# A0802022 14E9516F
# A0802022 14E82EF8
# A0802022 14E82E96
# A0802022 14E82E1C
# A0802022 14E82D65
# A0802022 14E80C3C
# A0802022 14E80BE1
# A0802130 101440F5

Press Ctrl+C to exit
>$ tmp 0
00000000
# TZone No:00
# Temperature:+0.0(0x0000)

Press Ctrl+C to exit
>$ tmp 1
00000000
# TZone No:01
# Temperature:+0.0(0x0000)

Press Ctrl+C to exit
>$ bringup
00000000
# [SSM] Bringup Start.
# [SSM] PS0 ok.
# [SSM] PS1 ok.

Press Ctrl+C to exit
>$ errlog
00000000
# [SSM] PS2 ok.
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
OK 00000000
#!
#!Boot Loader SE Version 3.0.0
#!(Build ID: 3684,41778,
#!Build Date: 2009-08-28_22:53:58)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# CODE     CLOCK
# A0802022 1BD41E2D
# A0802022 1BD41DA7
# A0802022 1BCB2A0A
# A0802022 1BCB2860
# A0802022 1BCB2555
# A0802022 1BCB17A6
# A0802022 1BCB0CE4
# A0802022 1BCAFCB5
# A0802022 1BCAA517
# A0802022 1BCAA4DE
# A0802022 1BC9D759
# A0802022 1BC9D64C
# A0802022 1BC99A83
# A0802022 1BC9921F
# A0802022 1BC990D9
# A0802022 1BC990CF
# A0802022 1BC98FFB
# A0802022 1BC98C80
# A0802022 1BC98B90
# A0802022 1BC98B86
# A0802022 1BC98B43
# A0802022 1BC98B39
# A0802022 14E96B9B
# A0802022 14E9516F
# A0802022 14E82EF8
# A0802022 14E82E96
# A0802022 14E82E1C
# A0802022 14E82D65
# A0802022 14E80C3C
# A0802022 14E80BE1
# A0802130 101440F5

Press Ctrl+C to exit
>$ help
00000000
# B_AUTH "AUTH1"
# B_AUTH "AUTH2"
# ANY    "AUTHVER"
# A_AUTH "BOOT"
# A_AUTH "BOOTENABLE"
# A_AUTH "CID"
# A_AUTH "CSAREA"
# A_AUTH "DISABLEALLERASE"
# A_AUTH "ECID"
# A_AUTH "EEP"
# ANY    "ERRLOG"
# A_AUTH "HALT"
# A_AUTH "KSV"
# INT    "LS"
# A_AUTH "PDAREA"
# A_AUTH "R16"
# A_AUTH "R32"
# A_AUTH "R8"
# A_AUTH "REV"
# ANY    "SETCMDLONG"
# A_AUTH "SPU"
# ANY    "VER"
# A_AUTH "VID"
# A_AUTH "W16"
# A_AUTH "W32"
# A_AUTH "W8"
# A_AUTH "bestat"
# A_AUTH "bringup"
# INT    "buzz"
# INT    "buzzduty"
# INT    "cleareep"
# INT    "commt"
# A_AUTH "csum"
# A_AUTH "devpm"
# A_AUTH "duty"
# A_AUTH "eepcsum"
# A_AUTH "ejectsw"
# ANY    "errlog"
# A_AUTH "extend"
# A_AUTH "fanconmode"
# A_AUTH "fanconpolicy"
# A_AUTH "fanservo"
# A_AUTH "fanservostat"
# A_AUTH "fantbl"
# INT    "getrtc"
# A_AUTH "hdmi"
# A_AUTH "help"
# INT    "hversion"
# A_AUTH "hyst"
# INT    "meminfo"
# A_AUTH "nonfatalerror"
# A_AUTH "patchinfo"
# INT    "poll"
# A_AUTH "portscan"
# INT    "portset"
# A_AUTH "powerstate"
# A_AUTH "powersw"
# A_AUTH "powupcause"
# A_AUTH "r"
# A_AUTH "r16"
# A_AUTH "r32"
# A_AUTH "r64"
# A_AUTH "r64d"
# INT    "rbe"
# INT    "recv"
# ANY    "revision"
# INT    "send"
# ANY    "setcmdlong"
# A_AUTH "shutdown"
# A_AUTH "syspowdown"
# INT    "task"
# A_AUTH "thrm"
# A_AUTH "tmp"
# A_AUTH "trp"
# A_AUTH "tsensor"
# A_AUTH "tshutdown"
# A_AUTH "tzone"
# ANY    "version"
# A_AUTH "w"
# A_AUTH "w16"
# A_AUTH "w32"
# A_AUTH "w64"
# A_AUTH "wbe"

Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] Shutdown Start.
# [SSM] Shutdown ok.
# (PowerOff State)

Press Ctrl+C to exit
>$ powersw
00000000
# [SSM] Bringup Start.
OK 00000000
# [SSM] PS0 ok.
# [SSM] PS1 ok.

Press Ctrl+C to exit
>$

Second code:
Code: 
Microsoft Windows [Version 10.0.19044.6937]
(c) Microsoft Corporation. All rights reserved.

C:\Users\Administrator\Downloads>ps3_syscon_uart_script.py
ps3_syscon_uart_script.py <serial port> <sc type ["CXR", "CXRF", "SW"]> <Optional:[-l log.txt]>

C:\Users\Administrator\Downloads>ps3_syscon_uart_script.py COM3 SW
Press Ctrl+C to exit
>$ auth
Auth successful
Press Ctrl+C to exit
>$ errlog
00000000
# CODE     CLOCK
# A0802022 1BD41E2D
# A0802022 1BD41DA7
# A0802022 1BCB2A0A
# A0802022 1BCB2860
# A0802022 1BCB2555
# A0802022 1BCB17A6
# A0802022 1BCB0CE4
# A0802022 1BCAFCB5
# A0802022 1BCAA517
# A0802022 1BCAA4DE
# A0802022 1BC9D759
# A0802022 1BC9D64C
# A0802022 1BC99A83
# A0802022 1BC9921F
# A0802022 1BC990D9
# A0802022 1BC990CF
# A0802022 1BC98FFB
# A0802022 1BC98C80
# A0802022 1BC98B90
# A0802022 1BC98B86
# A0802022 1BC98B43
# A0802022 1BC98B39
# A0802022 14E96B9B
# A0802022 14E9516F
# A0802022 14E82EF8
# A0802022 14E82E96
# A0802022 14E82E1C
# A0802022 14E82D65
# A0802022 14E80C3C
# A0802022 14E80BE1
# A0802130 101440F5

Press Ctrl+C to exit
>$ help
00000000
# B_AUTH "AUTH1"
# B_AUTH "AUTH2"
# ANY    "AUTHVER"
# A_AUTH "BOOT"
# A_AUTH "BOOTENABLE"
# A_AUTH "CID"
# A_AUTH "CSAREA"
# A_AUTH "DISABLEALLERASE"
# A_AUTH "ECID"
# A_AUTH "EEP"
# ANY    "ERRLOG"
# A_AUTH "HALT"
# A_AUTH "KSV"
# INT    "LS"
# A_AUTH "PDAREA"
# A_AUTH "R16"
# A_AUTH "R32"
# A_AUTH "R8"
# A_AUTH "REV"
# ANY    "SETCMDLONG"
# A_AUTH "SPU"
# ANY    "VER"
# A_AUTH "VID"
# A_AUTH "W16"
# A_AUTH "W32"
# A_AUTH "W8"
# A_AUTH "bestat"
# A_AUTH "bringup"
# INT    "buzz"
# INT    "buzzduty"
# INT    "cleareep"
# INT    "commt"
# A_AUTH "csum"
# A_AUTH "devpm"
# A_AUTH "duty"
# A_AUTH "eepcsum"
# A_AUTH "ejectsw"
# ANY    "errlog"
# A_AUTH "extend"
# A_AUTH "fanconmode"
# A_AUTH "fanconpolicy"
# A_AUTH "fanservo"
# A_AUTH "fanservostat"
# A_AUTH "fantbl"
# INT    "getrtc"
# A_AUTH "hdmi"
# A_AUTH "help"
# INT    "hversion"
# A_AUTH "hyst"
# INT    "meminfo"
# A_AUTH "nonfatalerror"
# A_AUTH "patchinfo"
# INT    "poll"
# A_AUTH "portscan"
# INT    "portset"
# A_AUTH "powerstate"
# A_AUTH "powersw"
# A_AUTH "powupcause"
# A_AUTH "r"
# A_AUTH "r16"
# A_AUTH "r32"
# A_AUTH "r64"
# A_AUTH "r64d"
# INT    "rbe"
# INT    "recv"
# ANY    "revision"
# INT    "send"
# ANY    "setcmdlong"
# A_AUTH "shutdown"
# A_AUTH "syspowdown"
# INT    "task"
# A_AUTH "thrm"
# A_AUTH "tmp"
# A_AUTH "trp"
# A_AUTH "tsensor"
# A_AUTH "tshutdown"
# A_AUTH "tzone"
# ANY    "version"
# A_AUTH "w"
# A_AUTH "w16"
# A_AUTH "w32"
# A_AUTH "w64"
# A_AUTH "wbe"

Press Ctrl+C to exit
>$ bringup
00000000
# [SSM] Bringup Start.
# [SSM] PS0 ok.
# [SSM] PS1 ok.

Press Ctrl+C to exit
>$ errlog
00000000
# [SSM] PS2 ok.
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
OK 00000000
#!
#!Boot Loader SE Version 3.0.0
#!(Build ID: 3684,41778,
#!Build Date: 2009-08-28_22:53:58)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# [SSM] Cond/Fatal received, msg=2687.
# [SSM] Fataldown Start.
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
# CODE     CLOCK
# A0801200 0B49D822
# A0802022 1BD41E2D
# A0802022 1BD41DA7
# A0802022 1BCB2A0A
# A0802022 1BCB2860
# A0802022 1BCB2555
# A0802022 1BCB17A6
# A0802022 1BCB0CE4
# A0802022 1BCAFCB5
# A0802022 1BCAA517
# A0802022 1BCAA4DE
# A0802022 1BC9D759
# A0802022 1BC9D64C
# A0802022 1BC99A83
# A0802022 1BC9921F
# A0802022 1BC990D9
# A0802022 1BC990CF
# A0802022 1BC98FFB
# A0802022 1BC98C80
# A0802022 1BC98B90
# A0802022 1BC98B86
# A0802022 1BC98B43
# A0802022 1BC98B39
# A0802022 14E96B9B
# A0802022 14E9516F
# A0802022 14E82EF8
# A0802022 14E82E96
# A0802022 14E82E1C
# A0802022 14E82D65
# A0802022 14E80C3C
# A0802022 14E80BE1

Press Ctrl+C to exit
>$ bringup
FFFFA605

Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] Clearfatal Start.
# [SSM] Clearfatal ok.
# (PowerOff State)

Press Ctrl+C to exit
>$ powersw
00000000
# [SSM] Bringup Start.
OK 00000000
# [SSM] PS0 ok.
# [SSM] PS1 ok.

Press Ctrl+C to exit
>$ errlog
00000000
# [SSM] PS2 ok.
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
#!
#!Boot Loader SE Version 3.0.0
#!(Build ID: 3684,41778,
#!Build Date: 2009-08-28_22:53:58)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# [SSM] Cond/Fatal received, msg=2687.
# [SSM] Fataldown Start.
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
# CODE     CLOCK
# A0801200 0B49D8C1
# A0801200 0B49D822
# A0802022 1BD41E2D
# A0802022 1BD41DA7
# A0802022 1BCB2A0A
# A0802022 1BCB2860
# A0802022 1BCB2555
# A0802022 1BCB17A6
# A0802022 1BCB0CE4
# A0802022 1BCAFCB5
# A0802022 1BCAA517
# A0802022 1BCAA4DE
# A0802022 1BC9D759
# A0802022 1BC9D64C
# A0802022 1BC99A83
# A0802022 1BC9921F
# A0802022 1BC990D9
# A0802022 1BC990CF
# A0802022 1BC98FFB
# A0802022 1BC98C80
# A0802022 1BC98B90
# A0802022 1BC98B86
# A0802022 1BC98B43
# A0802022 1BC98B39
# A0802022 14E96B9B
# A0802022 14E9516F
# A0802022 14E82EF8
# A0802022 14E82E96
# A0802022 14E82E1C
# A0802022 14E82D65
# A0802022 14E80C3C

Press Ctrl+C to exit
>$ cleareep
F0000003
# [UCMD] Unknown command.

Press Ctrl+C to exit
>$ bestat
00000000
# (Error State) (Fatal)
# State = 07

Press Ctrl+C to exit
>$ hdmi
FFFFA603
# [HDMI] Unknown Sub Command.hdmi

Press Ctrl+C to exit
>$ powupcause
00000000
# BE is not ON.

Press Ctrl+C to exit
>$
 
Last edited:
Komotonoto said:
Hello, I am trying to ressurrect my PS3 slim as well. It has a GLOD after replacing the HDMI port. I will attach 2 separate reports.
PS3 MODEL: CECH-2001A
Mobo: DYN-001
first code:

Code: 
Microsoft Windows [Version 10.0.19044.6937]
(c) Microsoft Corporation. All rights reserved.

C:\Users\Administrator\Downloads>pip install pyserial
Collecting pyserial
  Downloading pyserial-3.5-py2.py3-none-any.whl (90 kB)
     |████████████████████████████████| 90 kB 2.7 MB/s
Installing collected packages: pyserial
Successfully installed pyserial-3.5
WARNING: You are using pip version 21.1.1; however, version 26.0.1 is available.
You should consider upgrading via the 'c:\users\administrator\appdata\local\programs\python\python39\python.exe -m pip install --upgrade pip' command.

C:\Users\Administrator\Downloads>pip install pycryptodomex
Collecting pycryptodomex
  Downloading pycryptodomex-3.23.0-cp37-abi3-win_amd64.whl (1.8 MB)
     |████████████████████████████████| 1.8 MB 2.2 MB/s
Installing collected packages: pycryptodomex
Successfully installed pycryptodomex-3.23.0
WARNING: You are using pip version 21.1.1; however, version 26.0.1 is available.
You should consider upgrading via the 'c:\users\administrator\appdata\local\programs\python\python39\python.exe -m pip install --upgrade pip' command.

C:\Users\Administrator\Downloads>ps3_syscon_uart_script.py
ps3_syscon_uart_script.py <serial port> <sc type ["CXR", "CXRF", "SW"]> <Optional:[-l log.txt]>

C:\Users\Administrator\Downloads>ps3_syscon_uart_script.py COM3 SW
Press Ctrl+C to exit
>$ auth
Auth1 response invalid
Press Ctrl+C to exit
>$ AUTH
Auth1 response invalid
Press Ctrl+C to exit
>$ AUTH
Auth1 response invalid
Press Ctrl+C to exit
>$ AUTH
Auth1 response invalid
Press Ctrl+C to exit
>$ auth
Auth1 response invalid
Press Ctrl+C to exit
>$ auth
Auth successful
Press Ctrl+C to exit
>$ r 800 8
00000000
# +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F
# -----------------------------------------------
# 0C EF 0B B5 01 90 F3 38

Press Ctrl+C to exit
>$ powerstate
00000000
# ATA  :OFF
# PCI  :OFF
# PCIex:OFF
# RSX  :OFF
# GDDR :OFF
# XDR  :OFF
# EURUS:OFF
# SB   :OFF
# LAN  :OFF
# WLAN :ON

Press Ctrl+C to exit
>$ errlog
00000000
# CODE     CLOCK
# A0802022 1BD41E2D
# A0802022 1BD41DA7
# A0802022 1BCB2A0A
# A0802022 1BCB2860
# A0802022 1BCB2555
# A0802022 1BCB17A6
# A0802022 1BCB0CE4
# A0802022 1BCAFCB5
# A0802022 1BCAA517
# A0802022 1BCAA4DE
# A0802022 1BC9D759
# A0802022 1BC9D64C
# A0802022 1BC99A83
# A0802022 1BC9921F
# A0802022 1BC990D9
# A0802022 1BC990CF
# A0802022 1BC98FFB
# A0802022 1BC98C80
# A0802022 1BC98B90
# A0802022 1BC98B86
# A0802022 1BC98B43
# A0802022 1BC98B39
# A0802022 14E96B9B
# A0802022 14E9516F
# A0802022 14E82EF8
# A0802022 14E82E96
# A0802022 14E82E1C
# A0802022 14E82D65
# A0802022 14E80C3C
# A0802022 14E80BE1
# A0802130 101440F5

Press Ctrl+C to exit
>$ tmp 0
00000000
# TZone No:00
# Temperature:+0.0(0x0000)

Press Ctrl+C to exit
>$ tmp 1
00000000
# TZone No:01
# Temperature:+0.0(0x0000)

Press Ctrl+C to exit
>$ bringup
00000000
# [SSM] Bringup Start.
# [SSM] PS0 ok.
# [SSM] PS1 ok.

Press Ctrl+C to exit
>$ errlog
00000000
# [SSM] PS2 ok.
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
OK 00000000
#!
#!Boot Loader SE Version 3.0.0
#!(Build ID: 3684,41778,
#!Build Date: 2009-08-28_22:53:58)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# CODE     CLOCK
# A0802022 1BD41E2D
# A0802022 1BD41DA7
# A0802022 1BCB2A0A
# A0802022 1BCB2860
# A0802022 1BCB2555
# A0802022 1BCB17A6
# A0802022 1BCB0CE4
# A0802022 1BCAFCB5
# A0802022 1BCAA517
# A0802022 1BCAA4DE
# A0802022 1BC9D759
# A0802022 1BC9D64C
# A0802022 1BC99A83
# A0802022 1BC9921F
# A0802022 1BC990D9
# A0802022 1BC990CF
# A0802022 1BC98FFB
# A0802022 1BC98C80
# A0802022 1BC98B90
# A0802022 1BC98B86
# A0802022 1BC98B43
# A0802022 1BC98B39
# A0802022 14E96B9B
# A0802022 14E9516F
# A0802022 14E82EF8
# A0802022 14E82E96
# A0802022 14E82E1C
# A0802022 14E82D65
# A0802022 14E80C3C
# A0802022 14E80BE1
# A0802130 101440F5

Press Ctrl+C to exit
>$ help
00000000
# B_AUTH "AUTH1"
# B_AUTH "AUTH2"
# ANY    "AUTHVER"
# A_AUTH "BOOT"
# A_AUTH "BOOTENABLE"
# A_AUTH "CID"
# A_AUTH "CSAREA"
# A_AUTH "DISABLEALLERASE"
# A_AUTH "ECID"
# A_AUTH "EEP"
# ANY    "ERRLOG"
# A_AUTH "HALT"
# A_AUTH "KSV"
# INT    "LS"
# A_AUTH "PDAREA"
# A_AUTH "R16"
# A_AUTH "R32"
# A_AUTH "R8"
# A_AUTH "REV"
# ANY    "SETCMDLONG"
# A_AUTH "SPU"
# ANY    "VER"
# A_AUTH "VID"
# A_AUTH "W16"
# A_AUTH "W32"
# A_AUTH "W8"
# A_AUTH "bestat"
# A_AUTH "bringup"
# INT    "buzz"
# INT    "buzzduty"
# INT    "cleareep"
# INT    "commt"
# A_AUTH "csum"
# A_AUTH "devpm"
# A_AUTH "duty"
# A_AUTH "eepcsum"
# A_AUTH "ejectsw"
# ANY    "errlog"
# A_AUTH "extend"
# A_AUTH "fanconmode"
# A_AUTH "fanconpolicy"
# A_AUTH "fanservo"
# A_AUTH "fanservostat"
# A_AUTH "fantbl"
# INT    "getrtc"
# A_AUTH "hdmi"
# A_AUTH "help"
# INT    "hversion"
# A_AUTH "hyst"
# INT    "meminfo"
# A_AUTH "nonfatalerror"
# A_AUTH "patchinfo"
# INT    "poll"
# A_AUTH "portscan"
# INT    "portset"
# A_AUTH "powerstate"
# A_AUTH "powersw"
# A_AUTH "powupcause"
# A_AUTH "r"
# A_AUTH "r16"
# A_AUTH "r32"
# A_AUTH "r64"
# A_AUTH "r64d"
# INT    "rbe"
# INT    "recv"
# ANY    "revision"
# INT    "send"
# ANY    "setcmdlong"
# A_AUTH "shutdown"
# A_AUTH "syspowdown"
# INT    "task"
# A_AUTH "thrm"
# A_AUTH "tmp"
# A_AUTH "trp"
# A_AUTH "tsensor"
# A_AUTH "tshutdown"
# A_AUTH "tzone"
# ANY    "version"
# A_AUTH "w"
# A_AUTH "w16"
# A_AUTH "w32"
# A_AUTH "w64"
# A_AUTH "wbe"

Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] Shutdown Start.
# [SSM] Shutdown ok.
# (PowerOff State)

Press Ctrl+C to exit
>$ powersw
00000000
# [SSM] Bringup Start.
OK 00000000
# [SSM] PS0 ok.
# [SSM] PS1 ok.

Press Ctrl+C to exit
>$

Second code:
Code: 
Microsoft Windows [Version 10.0.19044.6937]
(c) Microsoft Corporation. All rights reserved.

C:\Users\Administrator\Downloads>ps3_syscon_uart_script.py
ps3_syscon_uart_script.py <serial port> <sc type ["CXR", "CXRF", "SW"]> <Optional:[-l log.txt]>

C:\Users\Administrator\Downloads>ps3_syscon_uart_script.py COM3 SW
Press Ctrl+C to exit
>$ auth
Auth successful
Press Ctrl+C to exit
>$ errlog
00000000
# CODE     CLOCK
# A0802022 1BD41E2D
# A0802022 1BD41DA7
# A0802022 1BCB2A0A
# A0802022 1BCB2860
# A0802022 1BCB2555
# A0802022 1BCB17A6
# A0802022 1BCB0CE4
# A0802022 1BCAFCB5
# A0802022 1BCAA517
# A0802022 1BCAA4DE
# A0802022 1BC9D759
# A0802022 1BC9D64C
# A0802022 1BC99A83
# A0802022 1BC9921F
# A0802022 1BC990D9
# A0802022 1BC990CF
# A0802022 1BC98FFB
# A0802022 1BC98C80
# A0802022 1BC98B90
# A0802022 1BC98B86
# A0802022 1BC98B43
# A0802022 1BC98B39
# A0802022 14E96B9B
# A0802022 14E9516F
# A0802022 14E82EF8
# A0802022 14E82E96
# A0802022 14E82E1C
# A0802022 14E82D65
# A0802022 14E80C3C
# A0802022 14E80BE1
# A0802130 101440F5

Press Ctrl+C to exit
>$ help
00000000
# B_AUTH "AUTH1"
# B_AUTH "AUTH2"
# ANY    "AUTHVER"
# A_AUTH "BOOT"
# A_AUTH "BOOTENABLE"
# A_AUTH "CID"
# A_AUTH "CSAREA"
# A_AUTH "DISABLEALLERASE"
# A_AUTH "ECID"
# A_AUTH "EEP"
# ANY    "ERRLOG"
# A_AUTH "HALT"
# A_AUTH "KSV"
# INT    "LS"
# A_AUTH "PDAREA"
# A_AUTH "R16"
# A_AUTH "R32"
# A_AUTH "R8"
# A_AUTH "REV"
# ANY    "SETCMDLONG"
# A_AUTH "SPU"
# ANY    "VER"
# A_AUTH "VID"
# A_AUTH "W16"
# A_AUTH "W32"
# A_AUTH "W8"
# A_AUTH "bestat"
# A_AUTH "bringup"
# INT    "buzz"
# INT    "buzzduty"
# INT    "cleareep"
# INT    "commt"
# A_AUTH "csum"
# A_AUTH "devpm"
# A_AUTH "duty"
# A_AUTH "eepcsum"
# A_AUTH "ejectsw"
# ANY    "errlog"
# A_AUTH "extend"
# A_AUTH "fanconmode"
# A_AUTH "fanconpolicy"
# A_AUTH "fanservo"
# A_AUTH "fanservostat"
# A_AUTH "fantbl"
# INT    "getrtc"
# A_AUTH "hdmi"
# A_AUTH "help"
# INT    "hversion"
# A_AUTH "hyst"
# INT    "meminfo"
# A_AUTH "nonfatalerror"
# A_AUTH "patchinfo"
# INT    "poll"
# A_AUTH "portscan"
# INT    "portset"
# A_AUTH "powerstate"
# A_AUTH "powersw"
# A_AUTH "powupcause"
# A_AUTH "r"
# A_AUTH "r16"
# A_AUTH "r32"
# A_AUTH "r64"
# A_AUTH "r64d"
# INT    "rbe"
# INT    "recv"
# ANY    "revision"
# INT    "send"
# ANY    "setcmdlong"
# A_AUTH "shutdown"
# A_AUTH "syspowdown"
# INT    "task"
# A_AUTH "thrm"
# A_AUTH "tmp"
# A_AUTH "trp"
# A_AUTH "tsensor"
# A_AUTH "tshutdown"
# A_AUTH "tzone"
# ANY    "version"
# A_AUTH "w"
# A_AUTH "w16"
# A_AUTH "w32"
# A_AUTH "w64"
# A_AUTH "wbe"

Press Ctrl+C to exit
>$ bringup
00000000
# [SSM] Bringup Start.
# [SSM] PS0 ok.
# [SSM] PS1 ok.

Press Ctrl+C to exit
>$ errlog
00000000
# [SSM] PS2 ok.
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
OK 00000000
#!
#!Boot Loader SE Version 3.0.0
#!(Build ID: 3684,41778,
#!Build Date: 2009-08-28_22:53:58)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# [SSM] Cond/Fatal received, msg=2687.
# [SSM] Fataldown Start.
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
# CODE     CLOCK
# A0801200 0B49D822
# A0802022 1BD41E2D
# A0802022 1BD41DA7
# A0802022 1BCB2A0A
# A0802022 1BCB2860
# A0802022 1BCB2555
# A0802022 1BCB17A6
# A0802022 1BCB0CE4
# A0802022 1BCAFCB5
# A0802022 1BCAA517
# A0802022 1BCAA4DE
# A0802022 1BC9D759
# A0802022 1BC9D64C
# A0802022 1BC99A83
# A0802022 1BC9921F
# A0802022 1BC990D9
# A0802022 1BC990CF
# A0802022 1BC98FFB
# A0802022 1BC98C80
# A0802022 1BC98B90
# A0802022 1BC98B86
# A0802022 1BC98B43
# A0802022 1BC98B39
# A0802022 14E96B9B
# A0802022 14E9516F
# A0802022 14E82EF8
# A0802022 14E82E96
# A0802022 14E82E1C
# A0802022 14E82D65
# A0802022 14E80C3C
# A0802022 14E80BE1

Press Ctrl+C to exit
>$ bringup
FFFFA605

Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] Clearfatal Start.
# [SSM] Clearfatal ok.
# (PowerOff State)

Press Ctrl+C to exit
>$ powersw
00000000
# [SSM] Bringup Start.
OK 00000000
# [SSM] PS0 ok.
# [SSM] PS1 ok.

Press Ctrl+C to exit
>$ errlog
00000000
# [SSM] PS2 ok.
# [SSM] PS3 ok.
# [SSM] PS4 ok.
# (PowerOn State)
#!
#!Boot Loader SE Version 3.0.0
#!(Build ID: 3684,41778,
#!Build Date: 2009-08-28_22:53:58)
#!
#!Copyright(C) 2009 Sony Computer Entertainment Inc.All Rights Reserved.
#!
#![INFO]: Connecting to Debug Device (SB UART)
# [SSM] Cond/Fatal received, msg=2687.
# [SSM] Fataldown Start.
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
# CODE     CLOCK
# A0801200 0B49D8C1
# A0801200 0B49D822
# A0802022 1BD41E2D
# A0802022 1BD41DA7
# A0802022 1BCB2A0A
# A0802022 1BCB2860
# A0802022 1BCB2555
# A0802022 1BCB17A6
# A0802022 1BCB0CE4
# A0802022 1BCAFCB5
# A0802022 1BCAA517
# A0802022 1BCAA4DE
# A0802022 1BC9D759
# A0802022 1BC9D64C
# A0802022 1BC99A83
# A0802022 1BC9921F
# A0802022 1BC990D9
# A0802022 1BC990CF
# A0802022 1BC98FFB
# A0802022 1BC98C80
# A0802022 1BC98B90
# A0802022 1BC98B86
# A0802022 1BC98B43
# A0802022 1BC98B39
# A0802022 14E96B9B
# A0802022 14E9516F
# A0802022 14E82EF8
# A0802022 14E82E96
# A0802022 14E82E1C
# A0802022 14E82D65
# A0802022 14E80C3C

Press Ctrl+C to exit
>$ cleareep
F0000003
# [UCMD] Unknown command.

Press Ctrl+C to exit
>$ bestat
00000000
# (Error State) (Fatal)
# State = 07

Press Ctrl+C to exit
>$ hdmi
FFFFA603
# [HDMI] Unknown Sub Command.hdmi

Press Ctrl+C to exit
>$ powupcause
00000000
# BE is not ON.

Press Ctrl+C to exit
>$
Click to expand...
check under a microscope or zoom in with a good phone camera if unavailable to see if you have any shorts on the pins, if not try the hdmi ic encoder
 
ascendantprime said:
check under a microscope or zoom in with a good phone camera if unavailable to see if you have any shorts on the pins, if not try the hdmi ic encoder
Click to expand...
Ello, what is the HDMI IC encoder? Are you saying I should swap out the HDMI IC encoder chip? Or are you saying I should get a HDMI port tester?

Thanks.
 
You must log in or register to reply here.

Similar threads

Back
Top