gss ps3 fat
Forum Noob
Hello, I bought a PS3 fat model cechp01 with YLOD and when I opened it, tantalums had been installed in place of the Nectokin chips, and it had the Eraser Mod. I did the UART on it and it only gave error 3004.
I replaced the tantalums because I thought they were poorly soldered, but it didn't solve the problem. I saw that the previous owner had removed two SMD resistors near the RSX first photo.
I soldered two 20k resistors and new tantalums (the last photo) in their place and it didn't solve the problem; it continues to give error 3004.
If anyone can help me, I would appreciate it.
Sorry for my English, I'm from Brazil.
I replaced the tantalums because I thought they were poorly soldered, but it didn't solve the problem. I saw that the previous owner had removed two SMD resistors near the RSX first photo.
I soldered two 20k resistors and new tantalums (the last photo) in their place and it didn't solve the problem; it continues to give error 3004.
If anyone can help me, I would appreciate it.
Sorry for my English, I'm from Brazil.
Code:
>$ auth
Auth successful
Press Ctrl+C to exit
>$ errlog
00000000
# CODE CLOCK
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
# A0093004 FFFFFFFF
>$ bringup
00000000
# [SSM] Bringup Start.
# [PowSeq] Error:A103
# [SSM] PS0 ng.
# [SSM] Cond/Fatal received, msg=24D0.
# [SSM] Fataldown Start.
Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
NG E00000E0
# [SSM] Clearfatal Start.
# [SSM] Clearfatal ok.
# (PowerOff State)
Press Ctrl+C to exit
>$ powersw
00000000
# [SSM] Bringup Start.
OK 00000000
# [PowSeq] Error:A103
# [SSM] PS0 ng.
# [SSM] Cond/Fatal received, msg=24D0.
# [SSM] Fataldown Start.
Press Ctrl+C to exit
>$ shutdown
00000000
# [SSM] Fataldown ok.
# (PowerOff State) (Fatal)
# [SSM] Clearfatal Start.
# [SSM] Clearfatal ok.
# (PowerOff State)
Press Ctrl+C to exit
>$