Help with drive remarry

D

diegogta4

Member
I was looking for a cooler for my CECHG01 when I saw an offer for a cooler with a scrap gift motherboard for an interesting price. Bought without thinking.

When i got here i started unpacking i saw that the plate had the nectokin ripped off and tantalum capacitors were installed, but it was missing the jumpers! I thought, did they forget to do the jumpers ?! But it would be too lucky. Still, I ran and turned on my soldering iron and made the jumpers. result: the boy came back to life!

It is missing the drive plate, because it would be scrap. without the drive card I can't update the system, right?

And now what do I do? I thank you for your help.

Enviado de meu SM-J600GT usando o Tapatalk
 
DeViL303 said:
That was lucky. nice!

You can use an unmarried drive to get the system updated. You only need a married drive to launch apps and discs.

Once you have it updated you can follow any tutorial to remarry the drive. Rebug CFW recommended for remarrying.

There is a tutorial here https://www.psx-place.com/threads/how-to-remarry-blueray-drive-on-cfw-ps3-step-by-step.26913/
Click to expand...
Thanks for the feedback! I have another blu-ray drive here, I will try to update. Thank you!

Enviado de meu SM-J600GT usando o Tapatalk
 
diegogta4 said:
Thanks for the feedback! I have another blu-ray drive here, I will try to update. Thank you!

Enviado de meu SM-J600GT usando o Tapatalk
Click to expand...
BTW: what FW is it on now?

I was assuming your console is already jailbroken, if not you might need to patch it for CFW with a hardware flasher like an e3 depending on the current version?
 
DeViL303 said:
BTW: what FW is it on now?

I was assuming your console is already jailbroken, if not you might need to patch it for CFW with a hardware flasher like an e3 depending on the current version?
Click to expand...
Sorry for the delay. so, some setbacks with this console, I tried to update with an ofw and gave the error 80002f1f9, now went into a loop. that the flat cable of the bluetooh card is bad. but I think I managed to fix it. another problem was that he gave ylod in one of the updates. I went to check my jumper and one of them came loose, the tip of my soldering iron is horrible, so I decided to buy another one. now i'm waiting to arrive to do new tests. anyway thank you!

Enviado de meu SM-J600GT usando o Tapatalk
 
You must log in or register to reply here.

Similar threads

Back
Top