Bertus van Zyl
Member
Does anyone have a Dyn001 board lying around and can measure the value of a capacitor for me?
Is the bigger cap between TH4002 and the edge of the board. There is a small diode to the right of the cap if the edge of the board is towards you, further right is a small flat ribbon connector for the power and eject button board.
It was pulling acin_det low.
Thanks in advance.
---- Merged Post ---
I checked super slim schematics out of interest and it uses a 1u 10v cap on the 5 volt by the power button connector. I installed one on my slim motherboard and the console is working. If the cap is the wrong value please let me know and i'll change it again but everything seems OK for now.
Last edited by a moderator:
