TheArcuzHunter
Member
As the title says. I just bought this controller, it's a brand new "Berry Blue" PS4 controller, which won't connect normally to any of my 2 ps3s. I tried using it wired, and what happens is:
It turns on an orange-red light for 2 seconds, and then it goes to blinking white for about 15 seconds in which I can use the controller normally for that time, and then goes back to orange-red, and is now unresponsive. The lights go from orange and red and it shuts off for a second and then back to orange. This loops until it's completely charged and stays with no LED lights on while plugged in.
Tried pairing it through the Accessory settings:
-Manage Bluetooth Devices (controller is plugged in)
-do you want to register a device? Pressed yes.
-pressed Start Scanning.
-Pressed Share + PS button on the PS4 controller. LED was blinking in bursts of 2.
-Pressed X on Wireless Controller. "pairing..." And then after a few seconds of waiting, it just goes back to wired mode (which doesn't work either)and it turns off.
I also tried doing the exact same steps for the wireless pairing except for the last one I plugged in the controller before pressing X on Wireless Controller. No changes. Also tried with 3 different male USB to male micro USB cables, on both consoles.
As a final attempt, I tried installing XPAD on my Rebug 4.88 Evilnat/ cobra 8.3 PS3. Doesn't run the xpad, since it's obvious it's incompatible with CEX.
What can I do to make this controller work? Anything at all? Any help is appreciated! Thank you in advance
-----EDIT------
I found out it's a generic ps4 controller copy of the original Berry Blue model
, is there no way to make it pair at all? Any apps or plugins that could make it work? Any tutorials on how to?
It turns on an orange-red light for 2 seconds, and then it goes to blinking white for about 15 seconds in which I can use the controller normally for that time, and then goes back to orange-red, and is now unresponsive. The lights go from orange and red and it shuts off for a second and then back to orange. This loops until it's completely charged and stays with no LED lights on while plugged in.
Tried pairing it through the Accessory settings:
-Manage Bluetooth Devices (controller is plugged in)
-do you want to register a device? Pressed yes.
-pressed Start Scanning.
-Pressed Share + PS button on the PS4 controller. LED was blinking in bursts of 2.
-Pressed X on Wireless Controller. "pairing..." And then after a few seconds of waiting, it just goes back to wired mode (which doesn't work either)and it turns off.
I also tried doing the exact same steps for the wireless pairing except for the last one I plugged in the controller before pressing X on Wireless Controller. No changes. Also tried with 3 different male USB to male micro USB cables, on both consoles.
As a final attempt, I tried installing XPAD on my Rebug 4.88 Evilnat/ cobra 8.3 PS3. Doesn't run the xpad, since it's obvious it's incompatible with CEX.
What can I do to make this controller work? Anything at all? Any help is appreciated! Thank you in advance
-----EDIT------
I found out it's a generic ps4 controller copy of the original Berry Blue model
, is there no way to make it pair at all? Any apps or plugins that could make it work? Any tutorials on how to?
Last edited:
