here is a tutorial about jailbreaking PS3 fat and PS3 Slims.

Keep in mind that the E3 flasher will downgrade any compatible PS3 it doesn't the firmware that it's on because the E3 flasher is Hardware downgrading.

E3 flasher will only work on NOR PS3
here are some links with fat PS3 and slim PS3 make sure to check them to determine what PS3 you have.

(Phat models)
https://i0.wp.com/stevenbreuls.com/wp-content/uploads/2014/01/E3PS3list.png

(Slim models)
https://i0.wp.com/stevenbreuls.com/wp-content/uploads/2014/01/E3PS3Slimlist.png


All the fat NOR PS3 can be downgraded with the E3 flasher
But when it comes to slim PS3 some 25XX models can be tricky so make sure that you check what's the lowest it can downgrade to with the MinverChk first.

With slim PS3 the safe zone is 3.55 and lower so make sure that you always check with the minverchk before doing anything..

Also if this is the first time you are using the E3 flasher you will need to update the E3 flasher with the update.bin after you have updated the flasher you can continue using the E3 flasher on any other NOR PS3 you don't need to update the Flasher again one time is good enough.!


[removed for pirate links]

Same Method.!!

[removed for pirate links]
 
Last edited by a moderator:
Can i use this to jailbreak my ps3 with a broken Bkuetooth (noBT) current ofw is 4.78 and minver is 3.50 and cech2512b 1A
 
Back
Top