OPL (Open PS2 Loader)

PS2 Open PS2 Loader v1.1.0

Go to download
Overview Extra info Updates (4) Reviews (8) History Discussion
brut_ said:
to show you how it looks, you can't navigate to ps2 settings
Click to expand...

Only difference is that I have duplex setting on auto. I also have an IPCONFIG.DAT made by Ulaunchelf into FMCB SYS-CONF folder. But it shouldn't matter I think. You can try anyway, make it on Ulaunchelf network settings and check.

Try also enabling overwriting/deleting option in OPL settings. I can make changes even with that disabled but to try is cheap.

If you cannot get to a solution you can always set your shared device as 192.168.0.1
 
TnA said:
You just set a static IP in OPL's Network settings since OPL 0.5...
Click to expand...

I meant you cannot choose between DHCP and static on OPL 0.9.2 (the option isn't present), you only get Static. So I thought that he perhaps had it set to DHCP and that was causing issues on OPL 0.9.2 side.
 
I was just guessing trying to narrow down the field. I took into account that some settings can affect OPL builds (that are far in release) in unexpected/conflicting ways.
 
Guys can I use OPL with a 256gb usb device? I don't know why, but in my head there was a belief that a USB device over 128GB was not compatible with OPL, or rather files over 128GB were not read. Maybe I've read it somewhere in the past but I can't find an answer. I would like to buy a 256 GB hard drive to connect via usb, can anyone confirm that I can fill it with games without problems?
 
moriljn1 said:
Guys can I use OPL with a 256gb usb device? I don't know why, but in my head there was a belief that a USB device over 128GB was not compatible with OPL, or rather files over 128GB were not read. Maybe I've read it somewhere in the past but I can't find an answer. I would like to buy a 256 GB hard drive to connect via usb, can anyone confirm that I can fill it with games without problems?
Click to expand...

Probably you remembered the 128GB internal HDD limit (before the 48 bit LBA formatting was implemented).
 
I have a problem, some games can turn on 480p, but you need to press and hold triangle and cross when the game starts, if I'm using bluetooth to connect my DS3 then I can't do it, because first you need to connect to the controller, is there any way to solve it?
 
Hi there!
I have a problem. When I use SMB, games occur stuttering. For example, The Suffering (SLUS-20636) stutter during gameplay.
Later I look at the traffic graph on my router, I notice that stutters happen when the game loads some data.
When I use the must cheapest flash in the whole world, game run flawless.
I use 1 Gbit LAN, game stored on NAS with SSD.

How can I fix this?
 
Last edited:
Hello, I've run into an issue with the exFAT compatible version at the very least. I launch a game, and it goes pink. It also doesn't recognize the art files from what I can see. So... yeah. It's an issue.
 
EA Tiburon CD based games now work on the latest beta, OPL has improved games little by little for months, this along with UDPBD and the release of Neutrino this has been a pretty good year for the PS2 scene so far.
 
New GUIs for OPL and Neutrino are coming as well.

MX4SIO compatibility has also improved a lot, especially regarding stability (previously also caused bad performance on some cards) and support of cards.

Neutrino is the PERFECT new playground for debugging games, because like the name implies it tries to be minimalistic and small.
It's much like a barebones OPL game-core without a GUI, but awesome to find issues with games. There is much less to look into in some cases!

SD2PSX technically came out at the end of last year, but the stuff is picking up on speed now. More people know it and more people start to join development as well!

SD2PSX with MC-Emulation and maybe MX4SIO-Support at the same time would be awesome and might be possible.

There is soooo much more to come, now that AthenaEnv (Javascript) and Enceladus (LUA) are out!!!
 
EDIT: Yeeeeesh all that was wrong is jamming R2 button, IGNORE!

Oh nooo! I lost my ingame reset the L1+L2+R1+R2+Select+Start is no more doing nothing..

My fault I tried a earlier OPL from mass from USB to make Phantasy Star Universe play and that ever since killed my IGR in OPL v1.0.0, I am just going to USB the Phantasy Stars then

So how do I start up that OPL completely from scratch? I deleted with PS2 browser the OPL icon in slot 1 in mc0 but crap from that old OPL still lingers still cannot IGR..

FMCB from slot 2 from mc1, same where my OPL v1.0.0 elf resides
 
Last edited:
You must log in or register to reply here.

Similar threads

Back
Top