PSP POPS - External Configs and Ad Hoc Params

[Ronnie Sahlberg]

Hi @Ronnie Sahlberg, please add this batch. I just edited some configs to fix a few issues, so it's just four sets.

done

 

[mrjaredbeta]

Attached configs for the other Driver versions.

 

[Ronnie Sahlberg]

added

Attached configs for the other Driver versions.

 

[Playa-V]

Valkyrie Profile
US
Vita/Adrenaline


I'm at the Forest of Spirits stage and there is this weird screen freezing - The screen shows a frozen image during battles but I can hear the sounds, when I move the directionals or press buttons. Sometimes it goes back to normal after a few seconds but other times it completely crashes and I need to reopen Adrenaline.

 

[Webardo]

Valkyrie Profile
US
Vita/Adrenaline


I'm at the Forest of Spirits stage and there is this weird screen freezing - The screen shows a frozen image during battles but I can hear the sounds, when I move the directionals or press buttons. Sometimes it goes back to normal after a few seconds but other times it completely crashes and I need to reopen Adrenaline.

Could you please upload your save file?
Also, which converter did you use for the game?

 

[Playa-V]

Could you please upload your save file?
Also, which converter did you use for the game?

I converted the eboot, using the most recent release of POPS-fe. The freezing doesnt happen in every single battle, it happens like every 1/3 battles, it's random.

It seems I cant post links or attachments, yet. I'll PM you.

 

[Leonardo Meireles]

Is it possible to completely disable the bilinear filter even on a custom scale? Are these parameters found in CONFIG.BIN?

 

[Balllsiiid]

Is there an Config for racing lagoon?

 

[Ronnie Sahlberg]

Is there an Config for racing lagoon?

There is one for the Japaneese version for PSP: SLPS-02038
It should be automatically applied if you convert it with pop-fe.

As far as I can tell this game was never released outside of japan so, yeah, a config exist and will be automatically be applied when converted with pop-fe.
There is an english fan-translation of this game too but that still the same game-id as the japaneese version so the config SHOULD still be applied if you conver the fan-translation.

 

[Balllsiiid]

There is one for the Japaneese version for PSP: SLPS-02038
It should be automatically applied if you convert it with pop-fe.

As far as I can tell this game was never released outside of japan so, yeah, a config exist and will be automatically be applied when converted with pop-fe.
There is an english fan-translation of this game too but that still the same game-id as the japaneese version so the config SHOULD still be applied if you conver the fan-translation.

I have one question just convert the config to pop fe and add it in poploader folder thats it? If yes pls tell me how to convert it? I already have an converted fan patched version i just need an config that will make it run better

There is one for the Japaneese version for PSP: SLPS-02038
It should be automatically applied if you convert it with pop-fe.

As far as I can tell this game was never released outside of japan so, yeah, a config exist and will be automatically be applied when converted with pop-fe.
There is an english fan-translation of this game too but that still the same game-id as the japaneese version so the config SHOULD still be applied if you conver the fan-translation.

I almost forgot to add this can you send me the config file pls?

 

[Ronnie Sahlberg]

I have one question just convert the config to pop fe and add it in poploader folder thats it? If yes pls tell me how to convert it? I already have an converted fan patched version i just need an config that will make it run better

The config is embedded in the EBOOT.PBP file. The only tool that can add the config to the EBOOT.PBP is pop-fe. It does so automatically.
If you converted the game with any other tool you would need to manually patch the config into the EBOOT.PBP using a hex-editor.

If you already have a converted game:
Here is the config: https://github.com/sahlberg/pop-fe/blob/master/pspconfigs/Racing Lagoon/SLPS-02038.bin
It is 272 bytes in size and you will need to add it to the correct place in the EBOOT.PBP using a hex-editor.

 

[Balllsiiid]

The config is embedded in the EBOOT.PBP file. The only tool that can add the config to the EBOOT.PBP is pop-fe. It does so automatically.
If you converted the game with any other tool you would need to manually patch the config into the EBOOT.PBP using a hex-editor.

If you already have a converted game:
Here is the config: https://github.com/sahlberg/pop-fe/blob/master/pspconfigs/Racing Lagoon/SLPS-02038.bin
It is 272 bytes in size and you will need to add it to the correct place in the EBOOT.PBP using a hex-editor.

What converted tool are we talking like psx2psp? If i converted on psx2psp do i need to manually patch it?

 

[Ronnie Sahlberg]

What converted tool are we talking like psx2psp? If i converted on psx2psp do i need to manually patch it?

Yes. If you used PSX2PSP you will need to manually patch the EBOOT.PBP with a hexeditor to add the config.
Because PSX2PSP is not a terribly modern or advanced tool, it does not know how to use configs.

 

[Balllsiiid]

Yes. If you used PSX2PSP you will need to manually patch the EBOOT.PBP with a hexeditor to add the config.
Because PSX2PSP is not a terribly modern or advanced tool, it does not know how to use configs.

Aight so my best bet to like use pop-fe and convert a new one and add the config file? How do you do it like converting a psx to psp and adding config?

Hello guys I need help asap idk why but when after converting English patch racing lagoon and putting in my psp and starting it my psp said can not start its corrupted? But I only did is download the new pop-fe and convert it did i miss anything or I am being stupid to understand how to set up pop-fe I already did installed python312?

Hey guys im here agian does I need to like use python to setup what pop-fes need or no (Im using Windows Btw)? If no why it still like showing corrupt data when starting my converted racing lagoon english patch?

Yes. If you used PSX2PSP you will need to manually patch the EBOOT.PBP with a hexeditor to add the config.
Because PSX2PSP is not a terribly modern or advanced tool, it does not know how to use configs.

Yes. If you used PSX2PSP you will need to manually patch the EBOOT.PBP with a hexeditor to add the config.
Because PSX2PSP is not a terribly modern or advanced tool, it does not know how to use configs.

Um hello do I need to like setup the pop-fes on windows like with python or not? If not why is it still like when booting my converted racing lagoon english patch eboot on my psp it says its corrupted? (Yes atrandenc works yes i saw it)

 

[Balllsiiid]

Hey guys I asked other ppl who used pop-fe never got problem on pop-fe psp and told ke how to setup they even said racing lagoon doesnt work for them they think the config for racing lagoon on pop-fe must making the game corrupted can anyone pls fix it?

 

[Ronnie Sahlberg]

Aight so my best bet to like use pop-fe and convert a new one and add the config file? How do you do it like converting a psx to psp and adding config?

Hello guys I need help asap idk why but when after converting English patch racing lagoon and putting in my psp and starting it my psp said can not start its corrupted? But I only did is download the new pop-fe and convert it did i miss anything or I am being stupid to understand how to set up pop-fe I already did installed python312?

Hey guys im here agian does I need to like use python to setup what pop-fes need or no (Im using Windows Btw)? If no why it still like showing corrupt data when starting my converted racing lagoon english patch?



Um hello do I need to like setup the pop-fes on windows like with python or not? If not why is it still like when booting my converted racing lagoon english patch eboot on my psp it says its corrupted? (Yes atrandenc works yes i saw it)

Download the precompiled binary in Releases. Filename is pop-fe-ui.zip
Extract it and run pop-fe-psp.exe
It will automatically insert the config into the EBOOT.PBP when it converts the game.

 

[Balllsiiid]

Download the precompiled binary in Releases. Filename is pop-fe-ui.zip
Extract it and run pop-fe-psp.exe
It will automatically insert the config into the EBOOT.PBP when it converts the game.

I did this already talk to a friend about it know his ways but it doenst work for him we now both things its the config for racing lagoon making it corrupted

 

[Balllsiiid]

Guys i finally know whats cuasing the problem in the context Racing lagoon got 2 releases (Japan) and (Japan,Asian) im trying to convert the (Japan,Asian) release becuase its the only one that has english patch and i think becuase pop-fe thinks its the same release with the config it has evej tho its only for the (Japan).Can anyone make an config for (Japan,Asian) release of Racing lagoon?

 

[Balllsiiid]

Hello Cant anyone just make an config for Racing lagoon English oatch itself?

 

[mrjaredbeta]

@Balllsiiid Hi. There was only ever one release of Racing Lagoon. The config works for both the original and English patched version of this release. POP-FE should patch either without any issue.