n00b
Member
I also think that HEN is not enabling successfully.
Ps3 keeps freezing when enabling hen
- Thread starter SeifGamimg123
- Start date
ade23554
Member
ok thanks , i will tell u what happens
isampower2019
Member
plaese i need help! my ps3 superslim 500gb i updated to hen3.0 and it starts freezing
ade23554
Member
Update it again
SaiyanFantasyX
Member
@atreyu187 Could you provide me with another link for that PKG, please? Installed Hen yesterday and i`m having constant reboots whenever I try to enable it.
Leon120081
Member
Re install HFW firmware and re install hen .. Enable t but don't install webman mod it is the cause of problem
he has not logged in for almost a year. reinstall hfw and hen. do not install or re-enable any mods, toolboxes, etc untill you have enabled hen a few times with no problem. install them one by one and enable a few times between to help find the problem.
if you are using hen toolbox, you must be on 4.87 for the latest toolbox to work.
i doubt it is webman...but to check if it is webman, he could place an empty file named "boot_plugins.txt" on usb000 and have it plugged in while enabling hen. that will cause webman to not run.
Leon120081
Member
i am sure that webman is causing the problem of freezing ps3, from last two days i am just installing ... re-installing... updating firmware/updates to check the real problem and i found webman is the reason :/
try this new fix by @aldostools. maybe it will help. install webman. put a usb with boot_plugins.txt file like above. run the webman installer while holding L1 untill reboot. webman will not run - remove the usb now. use a file manager to overwrite the file aldo posted into dev_hdd0/plugins folder. reboot and test. if it doesnt work, use the usb again to disable webman and uninstall it.
In French (my langage).
Je suis aussi dans la même impasse que @Leon120081.
Je possède une PS3 CECH3004B, j'y ai installé le HFW-4.87.1 ainsi que le HEN-3.0.2 récemment (depuis quelques jours). J'y ai aussi installé le WMM-1.47.32 récent. Tout allait relativement bien, puis aujourd'hui j'ai décidé d'installer le "plugin" qui permet d'éviter les gels de la console sur des "paniques" d'un circuit lié au contrôle de la température des CPU et RSX. Installation faite via le logiciel "FileZilla".
J'ai redémarré la console, puis lancé le HEN et une fois celui-ci démarré (message "Welcome to PS3HEN 3.0.2' affiché à l'écran"), un gel de la console intervient immédiatement avec la led rouge clignotante et la verte allumée fixe. Je suis obligé d'arrêter la console par un appui sur le bouton d'arrêt et elle s'arrête. Lors du redémarrage, un contrôle des données est obligé par la console. La console ne peut plus fonctionner sous le HEN.
Que puis-je faire pour remédier à ce problème ???
In English via G-Trad.
I am also at the same dead end as @ Leon120081. I have a PS3 CECH3004B, I installed the HFW-4.87.1 and the HEN-3.0.2 recently (for a few days). I also installed the recent WMM-1.47.32 there. Everything was going relatively well, then today I decided to install the "plugin" which allows to avoid freezes of the console on "panics" of a circuit related to the temperature control of the CPU and RSX. Installation made via the "FileZilla" software.
I restarted the console, then launched the HEN and once it started (message "Welcome to PS3HEN 3.0.2 'displayed on the screen"), the console freezes immediately with the flashing red LED and the green on steady. I have to stop the console by pressing the stop button and it stops. When restarting, a data check is forced by the console. The console can no longer work under the HEN.
What can I do to fix this problem ???
Je suis aussi dans la même impasse que @Leon120081.
Je possède une PS3 CECH3004B, j'y ai installé le HFW-4.87.1 ainsi que le HEN-3.0.2 récemment (depuis quelques jours). J'y ai aussi installé le WMM-1.47.32 récent. Tout allait relativement bien, puis aujourd'hui j'ai décidé d'installer le "plugin" qui permet d'éviter les gels de la console sur des "paniques" d'un circuit lié au contrôle de la température des CPU et RSX. Installation faite via le logiciel "FileZilla".
J'ai redémarré la console, puis lancé le HEN et une fois celui-ci démarré (message "Welcome to PS3HEN 3.0.2' affiché à l'écran"), un gel de la console intervient immédiatement avec la led rouge clignotante et la verte allumée fixe. Je suis obligé d'arrêter la console par un appui sur le bouton d'arrêt et elle s'arrête. Lors du redémarrage, un contrôle des données est obligé par la console. La console ne peut plus fonctionner sous le HEN.
Que puis-je faire pour remédier à ce problème ???
In English via G-Trad.
I am also at the same dead end as @ Leon120081. I have a PS3 CECH3004B, I installed the HFW-4.87.1 and the HEN-3.0.2 recently (for a few days). I also installed the recent WMM-1.47.32 there. Everything was going relatively well, then today I decided to install the "plugin" which allows to avoid freezes of the console on "panics" of a circuit related to the temperature control of the CPU and RSX. Installation made via the "FileZilla" software.
I restarted the console, then launched the HEN and once it started (message "Welcome to PS3HEN 3.0.2 'displayed on the screen"), the console freezes immediately with the flashing red LED and the green on steady. I have to stop the console by pressing the stop button and it stops. When restarting, a data check is forced by the console. The console can no longer work under the HEN.
What can I do to fix this problem ???
make an empty file named "boot_plugins.txt" on usb. plug usb into slot used to update firmware. turn on ps3 and enable hen. webman will not run. reinstall webamn from the installer icon. REMOVE THE USB. reboot and enable hen.
delete the empty file when done.
EDIT:
i use manual fan on 35% for HEN. i use 40% for console with overheating problems.
If you updated to 1.47.32 in the last week, I recommended to download the update again. The installer is updated often and sometimes there are issues fixed silently.
Merci beaucoup pout tes conseils @Coro , c'est très sympathique de ta part.
Ton conseil est arrivé trop tard et j'ai complètement formaté le DD de cette console et tout réinstallé dessus. C'est heureusement une console qui me sert pour des tests variés avec un DD de 160Go interne. Je n'ai pas touché à ma console de jeu familial (la CECH-4204C), elle est toujours sous le HFW-4.86.1/HEN-3.0.1. Je la passerai sous le HEN-3.0.2/HFW-4.87.1 une fois que je serai sûr que les HBs utilisés dessus sont tous complètements compatibles, ce n'est pas encore le cas.
Thank you very much for your advice @Coro, it's very nice of you.
Your advice came too late and I completely formatted the HD of this console and reinstalled everything on it. Fortunately, it is a console that I use for various tests with an internal 160GB HDD. I haven't touched my family game console (the CECH-4204C), it is still under the HFW-4.86.1 / HEN-3.0.1. I'll upgrade it to the HEN-3.0.2 / HFW-4.87.1 once I'm sure the HBs used on it are all fully compatible, that's not yet the case.
first read the forum rules HERE. we can't help with pirate stores.
then reinstall HEN to fix your enable hen icon.
Hi guys!
Run into small trouble with my multiMAN. Basically i have HEN and everything downloaded and it all worked fine for for a while but since i deleted multiMAN i can't redownload it. I have multiMAN on my USB but on Package Manager - Install package files IT WONT SHOW ANY FILES...
Run into small trouble with my multiMAN. Basically i have HEN and everything downloaded and it all worked fine for for a while but since i deleted multiMAN i can't redownload it. I have multiMAN on my USB but on Package Manager - Install package files IT WONT SHOW ANY FILES...
make sure usb is fat32 with mbr (not gpt).
Thanks for the reply!
I checked it and its mbr fat32.
Im so out of options im doin factory reset to my ps3
Any other suggestions?
cheers
