EnfanTerrible
Forum Noob
Hi guys,
I need desperate help because my fat 60Gb PS3 CECHC04 is dead probably due to a software brick:
months ago I've upgraded my old rebug cfw to Evilnat 4.90 PEX and everything seems fine until my son tried to put in a bd game and we discovered that it won't read it, tried also cd and dvd and nothing works (only icon in upper right swirling) but I'm sure it was working before upgrade.
So I tried an upgrade to 4.91.2 CEX but BD still not working...after reading and searching in this forum I've discovered in the thread of 4.91.2 Evilnat Cobra 8.5 a post from Evilnat which says to try a stage0_2 for solve this problem (page 108 post 405955, cannot link it directly I haven't permission).
So I've downloaded and installed CFW 4.91.2 Evilnat Cobra 8.5 [PEX] [STAGE0_2] but still no success with BD discs, at this point I've tried to disable Cobra in the menu setting and PS3 asked to reboot but it has freezed and after a forced shutting down with pressing power button for 5 sec now it won't boot anymore.
It power up with a bip and green light, the hdd led give only one short flash and no video, gamepad doesn't sync even connected with usb cable.
Tried to reset video settings, changed hdmi cable, tried composite and componet AV out, tried another TV.
Also tried to slip off the hdd and power it without hdd, also tried to put in another hdd with no partition (raw) and also with an exfat 30gb partition, but with no luck.
What can be happened and can I try something to fix it?
Thank you
maybe it can be useful to get a TTL interface and read syscon to understand what's the problem. I'll order the cable and I'll update info here
I need desperate help because my fat 60Gb PS3 CECHC04 is dead probably due to a software brick:
months ago I've upgraded my old rebug cfw to Evilnat 4.90 PEX and everything seems fine until my son tried to put in a bd game and we discovered that it won't read it, tried also cd and dvd and nothing works (only icon in upper right swirling) but I'm sure it was working before upgrade.
So I tried an upgrade to 4.91.2 CEX but BD still not working...after reading and searching in this forum I've discovered in the thread of 4.91.2 Evilnat Cobra 8.5 a post from Evilnat which says to try a stage0_2 for solve this problem (page 108 post 405955, cannot link it directly I haven't permission).
So I've downloaded and installed CFW 4.91.2 Evilnat Cobra 8.5 [PEX] [STAGE0_2] but still no success with BD discs, at this point I've tried to disable Cobra in the menu setting and PS3 asked to reboot but it has freezed and after a forced shutting down with pressing power button for 5 sec now it won't boot anymore.
It power up with a bip and green light, the hdd led give only one short flash and no video, gamepad doesn't sync even connected with usb cable.
Tried to reset video settings, changed hdmi cable, tried composite and componet AV out, tried another TV.
Also tried to slip off the hdd and power it without hdd, also tried to put in another hdd with no partition (raw) and also with an exfat 30gb partition, but with no luck.
What can be happened and can I try something to fix it?
Thank you
maybe it can be useful to get a TTL interface and read syscon to understand what's the problem. I'll order the cable and I'll update info here
Last edited by a moderator:
