PS3 PS3Xploit Flash Dumper (Supports All Ps3 Models )

STLcardsWS

STLcardsWS

Administrator
PS3 4.xx NAND/NOR/EMMC FLASH DUMPER -v2.0
USB & HDD Editions to choose from​

  • All PS3 models supported
  • All 4.10+ CEX CFW/OFW supported
  • 4.81 DEX CFW/OFW supported

Usage Tips:
  • Try using a LAN connection or a solid WiFi connection during exploitation. A weak signal can cause problems.
  • If the exploit takes more than 5 minutes to work, reload page, browser, or restart console and try again.
  • ]If you are using a LAN connection and experience network issues, make sure all cables to router are in working order.

HDD Edition USB Edition

  • HDD EDITION​
    IMPORTANT NOTES:
    • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....
    • So in short, never use the browser or use a homepage you cancel before running the exploit!
    • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
    Steps:
    1. Open the browser & browse to the **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new) website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
    2. Open the browser. The exploit page will load automatically. Download the dump.jpg placeholder file to your PS3 System Storage using the provided link as instructed on screen.
    3. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
    4. Trigger the exploit by pressing the dump button.
    5. On success, retrieve the dump file from the PS3 XMB Photo section, rename it appropriately to dump.hex or whatever & validate your dump with the py checker tool.


  • USB Edition​

    IMPORTANT NOTES:
    • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....
    • So in short, never use the browser or use a homepage you cancel before running the exploit!
    • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
    Steps:
    1. Open the browser & browse to the **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new) website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
    2. Open the browser. The exploit page will load automatically. Choose your dump path option.
    3. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
    4. Trigger the exploit by pressing the dump button.
    5. On success, validate your dump with the py checker tool.


** http://www.**ps3xploit.com >Doma...no Longer owned by team** (ps3xploit.me =new)​
 
STLcardsWS said:
PS3 4.xx NAND/NOR/EMMC FLASH DUMPER -v2.0
USB & HDD Editions to choose from​

  • All PS3 models supported
  • All 4.10+ CEX CFW/OFW supported
  • 4.81 DEX CFW/OFW supported

Usage Tips:
  • Try using a LAN connection or a solid WiFi connection during exploitation. A weak signal can cause problems.
  • If the exploit takes more than 5 minutes to work, reload page, browser, or restart console and try again.
  • ]If you are using a LAN connection and experience network issues, make sure all cables to router are in working order.

HDD Edition USB Edition

  • HDD EDITION​
    IMPORTANT NOTES:
    • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....
    • So in short, never use the browser or use a homepage you cancel before running the exploit!
    • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
    Steps:
    1. Open the browser & browse to the **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new) website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
    2. Open the browser. The exploit page will load automatically. Download the dump.jpg placeholder file to your PS3 System Storage using the provided link as instructed on screen.
    3. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
    4. Trigger the exploit by pressing the dump button.
    5. On success, retrieve the dump file from the PS3 XMB Photo section, rename it appropriately to dump.hex or whatever & validate your dump with the py checker tool.


  • USB Edition​

    IMPORTANT NOTES:
    • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....
    • So in short, never use the browser or use a homepage you cancel before running the exploit!
    • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
    Steps:
    1. Open the browser & browse to the **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new) website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
    2. Open the browser. The exploit page will load automatically. Choose your dump path option.
    3. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
    4. Trigger the exploit by pressing the dump button.
    5. On success, validate your dump with the py checker tool.


** http://www.**ps3xploit.com >Doma...no Longer owned by team** (ps3xploit.me =new)​
Click to expand...
I have tried a million times and it won't initialize.I'm on a Super Slim 4.85 hybrid
 
josey wales said:
I have tried a million times and it won't initialize.I'm on a Super Slim 4.85 hybrid
Click to expand...
it works, set it as your home page for best results.

these tools have been used by many thousands of people without issue.

try it on a clean install of HFW and worse case, do a system restore (after backing up your game saves, etc) and try again
 
Thank you for your hard work on the flash dumper :)

I successfully dumped the nor of an decr1400, running at 4.50. just had to modify few gadget offsets:

Code: 
var toc_addr_450 = 0x705DE0;
var gadget1_addr_450=0x0DF034;
var gadget2_addr_450=0x0106F0;
var gadget3_addr_450=0x616604;
var gadget4_addr_450=0x1A59EC;
var gadget5_addr_450=0x4357B8;
var gadget6_addr_450=0x42CBC0;
var gadget7_addr_450=0x62FC60;
var gadget8_addr_450=0x2C0D5C;
 
mysis said:
Thank you for your hard work on the flash dumper :)

I successfully dumped the nor of an decr1400, running at 4.50. just had to modify few gadget offsets:
Click to expand...
cool, thanks! :)

I started to port all the dex and decr, plus a weird uc2 dex, but never finished. Some are on the github and still have some not uploaded. Probably most are from @zecoxao needing different ones ported ;)

I can add those to the other ones for uploading soon, as it would be nice to eventually still have all versions supported with that dumper.
 
So I know it said in a guide somewhere. (not sure where) that Flash might be disabled across all users on the console. I have a bit of an extreme work around. Restore console and instead of quick restore, choose full restore! It wipes out the user cache and allows you to Re- enable flash as needed. (this isnt specific to this thread, but it will help out someone down the line)
 
aldostools said:
@esc0rtd3w I made a pull request to add support for 4.86-4.92.
https://github.com/PS3Xploit/flash-dumper/pull/3

I only tested it on 4.92. Offsets for 4.90 need to be validated.

I'm not sure if this tool is still useful. Someone in X asked me today to update the offsets.

This is the online version https://aldostools.github.io/flash-dumper/
Click to expand...

The offsets for 4.80 are the same as 4.90. 4.86 - 4.92 all are the same. The dumper offsets should all be shared with hen default ones, but would need to verify.

This html shows them all. We're just checking 4.86-4.92 and applying same offsets.

https://github.com/PS3Xploit/PS3HEN/blob/master/html/ps3hen_enabler_flash.html

The main js file has all of them though
https://github.com/PS3Xploit/PS3HEN/blob/master/html/hen_installer/ps3hen_v100.js
 
You must log in or register to reply here.

Similar threads

Back
Top