PS3Xploit Temporary Mirror [ps3xploit.me]

[esc0rtd3w]

I have temporarily removed the main link for the Alternate HEN Installer until the XML corruption issue can be addressed. I just tested the Auto Installer and it works fine.

EDIT by Coro:
HERE is a mirror of the alternate installer to use for now.

 

[esc0rtd3w]

@Coro i added your link to the OP. I honestly dont understand yet why it worked on .com, but not .me, as i copied the same backup to both. If it's alright, i can maybe temporarily link your copy from the mirror site?

 

[Coro]

@Coro i added your link to the OP. I honestly dont understand yet why it worked on .com, but not .me, as i copied the same backup to both. If it's alright, i can maybe temporarily link your copy from the mirror site?

sure that's cool.

 

[Raven143]

When you say you type the link and nothing shows up, please elaborate that. I know the site works, Ive tested it. All you should have to type is ps3xploit.me, there is no https, only http.

I had to type ps3xplit and then i could visit ps3xploit.me

 

[squallw]

Hi, is there a way to install cfw with the current situation? Or we can just install HEN?

 

[amirzaim]

Perhaps this might be $ony doing such move by targeting PS3exploit domain sites as malicious. Before that $ony never care about backward compatibility and such and since PS+ GamePass knockoff had been launched, $ony might doing some sort of Nintendo move soon.

 

[MexPB]

Perhaps this might be $ony doing such move by targeting PS3exploit domain sites as malicious. Before that $ony never care about backward compatibility and such and since PS+ GamePass knockoff had been launched, $ony might doing some sort of Nintendo move soon.

I doubt $ony did this, but I'm wondering if a new host will be used instead of GoDaddy for obvious reasons

 

[Raven143]

Do you know when the bj toolset will be avaible, cause i really want to jailbreak my ps3 and not install hen bescuse hen doesnt recognize my RAP file and they isnt a lot of options

 

[amirzaim]

Do you know when the bj toolset will be avaible, cause i really want to jailbreak my ps3 and not install hen bescuse hen doesnt recognize my RAP file and they isnt a lot of options

That's because Cobra payload on HEN doesn't recognize rap extension filename in upper case. You may need to edit it by making rap file extension in lower case.

 

[esc0rtd3w]

I had to type ps3xplit and then i could visit ps3xploit.me

that is crazy sounding lol. No way thats correct

 

[esc0rtd3w]

So the original website will be back or not ?
And can we use hen on the new website ?

the original site will not be back. Yes, you can use the new site for installing HEN.

 

[Hyperknux333]

the original site will not be back. Yes, you can use the new site for installing HEN.

is there an alternate way to do CFW with the mirror or should i just wait for it to be added to the mirror site? I dont want to use HEN when i know i can put CFW on this ps3

 

[esc0rtd3w]

is there an alternate way to do CFW with the mirror or should i just wait for it to be added to the mirror site? I dont want to use HEN when i know i can put CFW on this ps3

You can try the DNS method here (https://www.psx-place.com/threads/ps3xploit-net-down.37744/page-3#post-341909), but idk how long that is going to stay working. We will be setting up a new domain with shared hosting soon. BG Toolset probably wont be added to the current .me mirror site, but the mirror site may be setup to link to it, and other PS3Xploit projects, once new hosting and domain are ready. I am unsure what the .me mirror will ultimately be used for, as it is just being used to allow people to still access the content, at least until we get everything else straightened out.

 

[jdxym]

UPDATE: The original domains **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)/net/org have been unlawfully seized and resold. They should be considered unofficial and potentially dangerous to use. There will be community hosting at some point soon, which will be the new home of PS3Xploit and other projects. PS3HEN and BG Toolset will be updated to use the new domain, once a name is settled on, and we have everything setup.

For the time being, mostly everything should be working from the .me domain. There was a post by @Coro with a working copy of the Alternate HEN Installer on GitHub, here is the link (https://ps3addict.github.io/alternate/). This link is also on mirror page for now.

The situation is complicated, so i wont bother you with the details.

The BG Toolset is more complex than just moving files, and will most likely be unavailable for a time.

The **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new) contents have been mirrored to ps3xploit.me, with a few caveats.

• The site HTML and JS have been modified with the new domain extension. Any release files are untouched, as this only applies to the site installation web files.
  
• The current PS3HEN releases will not be touched, however, the p3t installer files will be rebuilt (saving old ones) to accommodate the .me extension only. This does not affect HEN in any way, but is the file that is used to download the HEN PKG, and will fail if the server domain is not edited.
• The HEN version check and auto update will fail.
  
• Anything that uses **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new) as a host will fail, for obvious reasons. This cannot currently be avoided.

Is there any alternative to using bg toolset, or a flash memory patch while it's down? any eta on the toolset?

 

[Coro]

Is there any alternative to using bg toolset, or a flash memory patch while it's down? any eta on the toolset?

nothing that is recommended. the toolset may be added to the temp site (ps3xploit.me) if it takes too long to get the old address working again, but no eta right now.

 

[Zwyczajny]

Is there any way to activate H3n with offline mode?
Today ill try enable hen 10 times with failed(rebooting) and saw the .net website is offline.
Installed new package from .me and now all seems okay, but is there any way to offline enabler?

 

[Hadi_ir]

for some reason when using the manual (alternate) installer, the XML is being written incorrectly. It is missing the last closing triangle bracket, and is a space instead. I feel like this issue has been addressed before, but i dont remember now. I still recommend using the auto or normal installer

View attachment 38162

<?xml version="1.0" encoding="UTF-8"?><XMBML version="1.0"><View id="root"><Attributes><Table key="hen"><Pair key="focus_priority"><String>-1</String></Pair></Table></Attributes><Items><Query class="type:x-xmb/folder-pixmap" key="hen" attr="hen" src="#hen_link"/><Query class="type:x-xmb/folder-pixmap" key="seg_premo" src="sel://localhost/nopremo?category_network.xml#seg_premo"/><Query class="type:x-xmb/folder-pixmap" key="seg_browser" src="#seg_browser"/></Items></View><View id="seg_premo"><Items><Item class="type:x-xmb/xmlpremo" key="PRemo" /></Items></View><View id="seg_browser"><Attributes><Table key="browser"><Pair key="icon_rsc"><String>tex_browser</String></Pair><Pair key="icon_notation"><String>WNT_XmbItemBrowser</String></Pair><Pair key="title_rsc"><String>msg_browser</String></Pair></Table></Attributes><Items><Item class="type:x-xmb/xmlwebbrowser" key="browser" attr="browser" /></Items></View><View id="hen_link"><Attributes><Table key="ps3hen_main"><Pair key="icon_rsc"><String>item_tex_Players</String></Pair><Pair key="title"><String>Install HEN</String></Pair><Pair key="info"><String>Downloads and installs the latest HEN Package (Reboot after)</String></Pair></Table></Attributes><Items><Query class="type:x-xmb/folder-pixmap" key="ps3hen_main" attr="ps3hen_main" src="#ps3hen_pkg" /></Items></View><View id="ps3hen_pkg"><Attributes><Table key="ps3hen_link"><Pair key="info"><String>net_package_install</String></Pair><Pair key="pkg_src"><String>http://ps3xploit.me/hen/installer/manual/4.89/HEN.pkg</String></Pair><Pair key="pkg_src_qa" ><String>http://ps3xploit.me/hen/installer/manual/4.89/HEN.pkg</String></Pair><Pair key="content_name"><String>msg_install</String></Pair><Pair key="content_id"><String>CUSTOM-INSTALLER_00-0000000000000000</String></Pair><Pair key="prod_pict_path"><String>http://ps3xploit.me/hen/installer/manual/hendl.png</String></Pair></Table></Attributes><Items><Item class="type:x-xmb/xmlnpsignup" key="ps3hen_link" attr="ps3hen_link" /></Items></View></XMBML

I installed hen yesterday through alternate mathod after several efforting i think its installed complete but i couldnt install through two otherways

Hi, is there a way to install cfw with the current situation? Or we can just install HEN?

U can download cfw from reputable place like here and install it with flash memory no matter with it bro

 

[NiQ]

nothing that is recommended. the toolset may be added to the temp site (ps3xploit.me) if it takes too long to get the old address working again, but no eta right now.

Maybe use a custom DNS server to redirect ** ** www.ps3xploit.net > Domain no Longer owned by team** (NEW URL = http://ps3toolset.com) > Domain no Longer owned by team** (NEW URL = http://ps3toolset.com back to its proper IP?

 

[leon thö]

There is some possibility to flash the ps3 for cfw because the mirro page does not work

 

[cherealpsx]

for some reason when using the manual (alternate) installer, the XML is being written incorrectly. It is missing the last closing triangle bracket, and is a space instead. I feel like this issue has been addressed before, but i dont remember now. I still recommend using the auto or normal installer

Thank you for your suggestion. I'd like to try auto installer. But need to fix my browser problem first.