PS4 PS4 Pro Power Supply 4-Pin Connector Alternative Points?

[xxxmarioxxx]

Got a great deal on ebay for a PS4 Pro (I think it's CUH-70xx) with its 4-pin power supply connector ripped off. The picture provided by seller shows all 4 pads are gone. The seller also attempted some fixes himself but it appears that he further damaged the motherboard and all remaining traces are gone. So here are my questions:
1. Are these alternative points for ACIN_DET(pin 1) and ACDC_STBY (pin 2) correct? Found this picture posted on another forum but nobody replied to it.

2. If the alternative points don't work, can i just bridge ACDC_STBY and 5V and make PSU supply 12V all the time?
3. What is ACIN_DET(pin 1) anyway? In some diagram i came across it just says it's 5V standby voltage.

 

[xxxmarioxxx]

Update:
Package just arrived today and I've already got the PS4 fixed using above diagram. For anyone who may have the same problem, my suggestion is to use jumper wires. Just solder jumper wires to alternative points on the bottom of motherboard and solder the connector to the other end, secure jumper wires to the motherboard with some glue and you are good to go. Plus when you disconnecting the 4-pinplug, you won't be putting any pressure on the motherboard. One thing to notice is that for 5V and GND pins (3,4) you may need to use thicker wires because they are carrying 5V 1.5A standby power. I just soldered then directly to the capacitor near the connector (in red circle).

 

[Mah0ny]

Hi, Can you please upload cable connection photos here? I have the same problem with my console CUH 7016b , and I can't run it. Thank you for your response

 

[xxxmarioxxx]

Hi, Can you please upload cable connection photos here? I have the same problem with my console CUH 7016b , and I can't run it. Thank you for your response

I don't want to completely disassembly my ps4 again to take pictures, but here's a more straight forward diagram i made. just need to connect 4 wires from the power supply to motherboard correspondingly. alt points are marked in color so you can use these in case you ruined the traces under the 4-pin connector.

 

[Mah0ny]

Thank you very much, it works!

 

[misato]

Merry Christmas! Thank you! this helped me a lot!

 

[Rookie55]

I need help, since 1 of the alternative points is broken on a ps4 pro that they brought me, specifically the 5v standby one, does anyone know where that point leads to to make a bridge?

 

[Maxwag9]

I don't want to completely disassembly my ps4 again to take pictures, but here's a more straight forward diagram i made. just need to connect 4 wires from the power supply to motherboard correspondingly. alt points are marked in color so you can use these in case you ruined the traces under the 4-pin connector.
View attachment 31172

Can you show me where the 3 and 4 wires are going?