PS3 Semi-Brick Help (Dex-Cex Error)

[RobH3nd086]

Hey Guys, I've Been Outta Te Scene For A While But I've Made An Error Trying To Unban My PS3 On The Newest Rebug Firmware. Now All I Get Is The 4-5 Beeps Of Death On Load Up.

I've Got Nand Phat PS3. Everything Was Going Well But I Accidentally Pressed Convert To Cex Whilst Running Dex Software & Now Im Unable To Boot To Dash.

Ive Got Dumps Of The Nand Before HEX Patched & After If This Helps.
I Can Downgrade To Firmware 1.00 As Tested This Before Patching Rebug Etc..

What Will I Need To Do To Fix.? Thanks

 

[alzaabi]

It seems you are an expert, forst watch my youtube channel "alzaabialzaabi"
However to get out of dex you need to E3 Card reader
1- Disconnect the ps3 from power put the "e3downgrade 12.03.bin" in the E3 Card Reader.
2- Put the Card in right side of the USB of your PS3
3- Connect the power to the PS3 , Press Power+Eject ... wait for the ps3 to power off.
4- Put the "Lv2diag.self" the Enter file not the eject file + Rogero 3.55 on the root of the flash drive without folders.
5- Put the flash drive in right side of the USB of your PS3.
6- Power on your PS3 wand watch the HDD LED indicator wait and wait till your ps3 intall the CFW and power off by itself.
7- Remove the flash drive then get into the recovery and install Rogero CFW 9.99 and do the QA flag.
8- Remember don't remove the Drive or other parts of your ps3 or it will not work.
8- say thanks

 

[Louay]

It seems you are an expert, forst watch my youtube channel "alzaabialzaabi"
However to get out of dex you need to E3 Card reader
1- Disconnect the ps3 from power put the "e3downgrade 12.03.bin" in the E3 Card Reader.
2- Put the Card in right side of the USB of your PS3
3- Connect the power to the PS3 , Press Power+Eject ... wait for the ps3 to power off.
4- Put the "Lv2diag.self" the Enter file not the eject file + Rogero 3.55 on the root of the flash drive without folders.
5- Put the flash drive in right side of the USB of your PS3.
6- Power on your PS3 wand watch the HDD LED indicator wait and wait till your ps3 intall the CFW and power off by itself.
7- Remove the flash drive then get into the recovery and install Rogero CFW 9.99 and do the QA flag.
8- Remember don't remove the Drive or other parts of your ps3 or it will not work.
8- say thanks

he said NAND so no e3 card reader & no e3downgrade bin he need teensy 2.0++ to get back to work and he need to downgrade to 3.55 enter fsm fix it then exit fsm and update to latest cfw

 

[alzaabi]

I thought he is on Dex and want to convert to CEX

 

[Cypher_CG89]

I thought he is on Dex and want to convert to CEX

Even if he were that is not the way to convert from CEX to DEX or vice versa on REBUG CFW. Enter REBUG toolbox, dump eid_root_key the press rewirte target id in flash... nice and simple.

The OP has somehow damaged his PS3 by doing what I have said above which is odd as this has never happened to me before and I am constantly going back and forth between CEX and DEX on one of my PS3s testing stuff.

Hey Guys, I've Been Outta Te Scene For A While But I've Made An Error Trying To Unban My PS3 On The Newest Rebug Firmware. Now All I Get Is The 4-5 Beeps Of Death On Load Up.

I've Got Nand Phat PS3. Everything Was Going Well But I Accidentally Pressed Convert To Cex Whilst Running Dex Software & Now Im Unable To Boot To Dash.

Ive Got Dumps Of The Nand Before HEX Patched & After If This Helps.
I Can Downgrade To Firmware 1.00 As Tested This Before Patching Rebug Etc..

What Will I Need To Do To Fix.? Thanks

What model PS3 you using? Its odd that this happened when converting for DEX to CEX.

When trying to unban your PS3 did you try to change the CID (IDPS) perminantly or just spoof it with an app such as CCAPI , webMAN MOD or such?

If trying to perminantly change it its possible that it has corrupted something.

 

[Zae]

he said NAND so no e3 card reader & no e3downgrade bin he need teensy 2.0++ to get back to work and he need to downgrade to 3.55 enter fsm fix it then exit fsm and update to latest cfw

can you possibly help me?? i have nand ps3 on cfw rebug 4.84 drex i converted from dex to cex i changed the mode from rebug to normal then changed kernel lv to cex it rebooted after this then wont connect to controller or display thru hdmi or boot into safe mode at all im semi new to all this cfw shit but im learning plz help :/ i been using my ps3 everyday for weeks now it also had been saying it was around 80-84ish temp idk how normal that is or isnt :/