PS3 Syscon Diagnosis Help

BP38

Forum Noob
Hi there, I'm new here. I'm trying to figure out what's the problem on this CECHK-04 (65nm RSX), unsealed but with without any intervention on the board. Here's the errorlog:
1A08010022D3C4A1B
2A08010022D3C4A0A
3A08010022D3C45FC
4A08010022D3C45ED
5A08010022D3C3D1F
6A08014FF2D3C31CA
7A08017012D3C31CA
8A08014FF2D3C31BF
9A08017012D3C31BF
10A08010012D3C319E
11A08010022D3C316E
12A08010022D3C30ED
13A08010022D3C30C8
14A08010022D3C2D65
15A08010022D3C2D56
16A08010022D3C2AE8
17A08010022D3C2AD4
18A08010022D3C2AAC
19A08010022D3C1BB0
20A08010022D3C1BA7
21A08010022D3C164E
22A08010022D3C15E7
23A08010022D3C15DF
24A08010022D3C15D7
25A08010022D3C15C8
26A08010022D3C15BC
27A08010022D3C0C78
28A08014FF2D3C0B47
29A08017012D3C0B47
30A08014FF2D3C0B3C
31A08017012D3C0B3C
32FFFFFFFF2D3C0B32
Something strange happened: the console have a 6+ seconds of ylod. But if I try to put the console in vertical sometimes it boot up, but the same happens when I try to trigger the bluray drive: it seems that once pressed the eject button the console stay on for more than 10 seconds, showing something at video.
The PS3 has HEN installed if it can be important (I saw something related hen and 1701 errors online).
Thanks for your support!
 
Something similar to the bluray drive happens when I remove the hdd.
P.S. To sum up:
- Console has HEN installed
- Console can start into recovery mode, but as soon as I connect (or disconnect) via wire the dualshock, it immediately shutdown with ylod.
- Console seems to stay a bit more on if I try to engage the disk drive with the eject button.
- I tried with a new hdd and without any hdd: it turns from a 6 sec ylod to a 20+ sec ylod.
- I tried to detach the bluray drive from the board, nothing new happened.
I suspect something related to NEC/Tokins (and I hope nothing related rsx), because no 3034 (or similiar) errors occurs and cause the wiki associate the 14FF (Check Stop) to a sequence 1601/1701 errors and a 3034.
 
Back
Top