PS3 4.81 STARBUCKS (+ COBRA 7.50) v1.02 CFW by habib

Following the release of 4.81 Starbucks v1.00 & v1.01 & his recent work with Fake Save Date/Game Quit Popups for REBUG CFW, developer HABIB has now turned his attention to COBRA once again and thus released a new version (v1.02) of his "Starbucks" firmware with an updated COBRA (v7.50) payload that of course comes with some new features included. The dev has included a new feature in the CFW that does not require the use of lv2 peek and other methods to get your console IDPS & also applied some patches that were once exclusive to MLT 's Firmwares. Cobra v7.50 adds some new functionality by adding PS2 ISO that are decryptted "Config Support", Backwards comparable console now will be allowed to use "ps2 netemu with cobra opcode 0x1ee9", Plus some additional PS2 changes for BC and Semi BC consoles.

Another interesting change includes will make updating to applications to work with Cobra easier as "modules can be updated, no more hash update needed", which should save developer's some time when supporting the payload. Additional details can be found below in HABIB's release quote
-STLcardsWS

4.81_habib_Cobra_starbucks.png


  • 4.81 STARBUCKS v1.02 + COBRA 7.50 CFW


    What's New:
    1.c00 without license
    2.possible bug fix when downloading pkgs
    3. cobra 7.50
    4: sc 870 patched(get_idps) sony blocked in 4.55, no more using lv2 peek etc to get idps xD​


    Cobra 7.50:
    • modules can be updated, no more hash update needed
    • ps2 iso decrypted config support
    • allow ps2 netemu on bc with cobra opcode 0x1ee9
    • stealth extension now disables sc15 as well
    • ps2 netemuu on bc and semi-bc ps3:
    bc_to_net(opcode, param)
    param=1 enable patch
    param=0 disable patch
    param=2 return current status​
    returns:
    return 1=enabled patch
    return 0=disabled patch
    return -1=its not a bc or semi bc ps3
    int ps2_netemu_cobra(int param)
    {
    lv2syscall2(8, (uint64_t)0x1ee9, (uint64_t)(int)param);
    return_to_user_prog(int);
    }

    ps2 with config:


  • 1. MADE OUT OF 4.81 OFW
    2. HAVE INSTALL PACKAGE FILES AND APP_HOME
    3. HAVE reActPSN COMPATIBILITY
    4. PATCHED LV0 TO DISABLE ECDSA CHECK
    5. PATCHED LV2 TO ADD PEEK/POKE SUPPORT
    6. PATCHED LV1 TO DISABLE LV2 PROTECTION
    7. PATCHED LV1 TO ADD PEEK/ POKE SUPPORT
    8. IT CAN RUN GAMES SIGNED WITH KEYS UP TO 4.81
    9. CAN BE UPDATED OVER ANY CFW.
    10. CAN BE UPDATED OVER 3.55 OFW
    11. NOT ADDED NO BT/BD PATCHES
    12. RSOD BYPASS
    13. REACTPSN OFFLINE PATCH ADDED
    14. BETTER SYSTEM STABILITY
    15. REMOVED CINAVIA DRM FOR HDD CONTENT
    16. REMOVED CINAVIA FOR BDMV
    17. REMOVED CINAVIA FOR BDVD
    18. QA FLAG ENABLED BY DEFAULT IF PS3 WAS QA ON 3.55
    19. COBRA 7.40
    20. SYSTEM ACTS AS A COMPLETELY NORMAL CFW WHEN COBRA DISABLED
    21. FSELF COMPATIBILITY ADDED
    22. PATCHED DOWNLOAD PLUGIN FOR DEX PKGS(FOR E.G XMBPD)
    23. ENCHANCED REMOTE PLAY
    24. REMOTE PLAY SFO FLAG OBSOLETE
    25. NO EPILEPSY WARNING
    26. SYSCALL 15 ADDED TO EXECUTE ANY LV2 INTERNAL FUNCTION
    UPDATE (v1.01) - day zero 1.01 update released.
    • fixed ps2 issue and whats new psn


Download: 4.81 Starbucks (v1.02) + Cobra 7.50
MD-5: BC87971E7ED9BED7A620418465EBB36C
 
Last edited by a moderator:
Ok, can you try this following?

It could be related to your CVTRM as well that handles save and trophy

1. install rebug 4.81.2 , and toolbox 2.02.12 [no need to go thru 3.55 downgrade]
2. enable cobra [ no webman ]
3. and change your debug menu type to "DEX"
4. go to debug setting
5. enable Fake Save Data Owner [ON]
6. and try mounting the game with multiMAN 4.81.02
7. run the game see if it passes loading.
Ok I'll try, but nothing happens to put that option dex being in cex?

I'm going to try and tell you
 
Ok, can you try this following?

It could be related to your CVTRM as well that handles save and trophy

1. install rebug 4.81.2 , and toolbox 2.02.12 [no need to go thru 3.55 downgrade]
2. enable cobra [ no webman ]
3. and change your debug menu type to "DEX"
4. go to debug setting
5. enable Fake Save Data Owner [ON]
6. and try mounting the game with multiMAN 4.81.02
7. run the game see if it passes loading.
also a nice fix for c00 games and that 8001009 error
 
im thinking it is cached data like joon @Aros
you still havent gotten back to us yet if u have tried webman 1.41
so its kind of hard to help you if you keep firing back with i did this i did that etc.
Yes, I put webman 1.41, it stays flashing for a long time and does not load anything, until finally I was able to enter the webman setup, but it does not let me activate neither the fan nor anything with the 1.41
 
Yes, I put webman 1.41, it stays flashing for a long time and does not load anything, until finally I was able to enter the webman setup, but it does not let me activate neither the fan nor anything with the 1.41
wait what? how long is it flashing?
 
Five long minutes ...
i jus checked another a thread i was replying to and it seems their blackscreen issue of their own was fixed i will pm them and get to the bottom of it i have a sneaking suspicion what the problem is but i'll have to see
 
I have already changed to rebug 4.81.2, installed the tollbox, I activated only the snake mode, then I changed to dex mode as you indicated, I left the menu, I changed the save data owner to on and it remains the same , I have also returned to webman 1.44 because 1.41 does not support 4.81 so I have checked, nothing works with that version of webman, I have also launched the game from multiman and neither. I think I have only to do to my console, I have already tried everything, any suggestions?:D
 
I have already changed to rebug 4.81.2, installed the tollbox, I activated only the snake mode, then I changed to dex mode as you indicated, I left the menu, I changed the save data owner to on and it remains the same , I have also returned to webman 1.44 because 1.41 does not support 4.81 so I have checked, nothing works with that version of webman, I have also launched the game from multiman and neither. I think I have only to do to my console, I have already tried everything, any suggestions?:D
Would you be ready to do something more complex?
We would need debugging information.
To get the info, you would need socat (on Linux or on mingw or cygwin) & a debug cobra payload to install manually, are you up for that?

Edit: Try what Joonie proposes first & if it leads nowhere, we'll look into this if you are interested.
Rebug 4.81.1 uses Cobra 7.32 so it may give you a different result.
 
I have already changed to rebug 4.81.2, installed the tollbox, I activated only the snake mode, then I changed to dex mode as you indicated, I left the menu, I changed the save data owner to on and it remains the same , I have also returned to webman 1.44 because 1.41 does not support 4.81 so I have checked, nothing works with that version of webman, I have also launched the game from multiman and neither. I think I have only to do to my console, I have already tried everything, any suggestions?:D

Ok, we can rule out the issue if the issue was caused by new changes on 4.81.2 or COBRA 7.5

You can try either MAMBA [no COBRA] or install 4.81.1 REBUG or 4.80.1 REBUG

Can you try those two CFWs? Fake Save Data owner isn't necessary
 
Ok, we can rule out the issue if the issue was caused by new changes on 4.81.2 or COBRA 7.5

You can try either MAMBA [no COBRA] or install 4.81.1 REBUG or 4.80.1 REBUG

Can you try those two CFWs? Fake Save Data owner isn't necessary
If I can try the 2, if you give me time you already know that it's going to take another little bit, I'll tell you right away
 
If I can try the 2, if you give me time you already know that it's going to take another little bit, I'll tell you right away
Test mamba 3.1.4 (from store.brewology.com) in 4.81.2 with disabled Cobra first. If the issue was cobra related, mamba should work.
Then try Rebug 4.81.1, it uses Cobra 7.31 instead of 7.50 in the 4.81.2 release.
Finally 4.80.1 uses Cobra 7.3 which could be worth testing too.

Take your time, Joonie & I will still be here when you are done... Lol
 
Last edited:
In 4.81.1 it does not work either, I'm going to see it with 4.80, but I'm going to take a little bit because it's late and my wife has to sleep the baby that everything is in my room, so I'm going to change the console to the living room And I continue to try from there, in a while I keep saying, thank you very much for your patience and help that you are giving me, I will return to answer you.
 
In 4.81.1 it does not work either, I'm going to see it with 4.80, but I'm going to take a little bit because it's late and my wife has to sleep the baby that everything is in my room, so I'm going to change the console to the living room And I continue to try from there, in a while I keep saying, thank you very much for your patience and help that you are giving me, I will return to answer you.

Your report just confirmed that neither COBRA or VSH was the problem. Thanks for your testing

Take your time and report back to us later
 
Your report just confirmed that neither COBRA or VSH was the problem. Thanks for your testing

Take your time and report back to us later
I just installed mamba 3.1.4 fixed, only once when I run it, xmb is restarted, but it will not let me use any game in multiman or webman
 

Featured content

Trending content

Back
Top