PS3 40nm RSX discovered in factory seald CECHA00!!

[Joonie]

I dumped the nand prior to installation of CFW so I have it

Sent from my SM-F936B using Tapatalk

Ok then please share that with us that'll be cool. And also dump your eid root key please.

 

[Timmy19]

Okay, where do I load it to?

Sent from my SM-F936B using Tapatalk

 

[Joonie]

Okay, where do I load it to?

Sent from my SM-F936B using Tapatalk

Check your PM. I prefer gdrive

 

[mathieulh]

Check your PM. I prefer gdrive

I would also be interested in this nand dump, incidentally. The eid_root_key would also be required to recover /dev_flash unless it can be dumped directly from the unit (after reflashing the nand data)

 

[littlebalup]

Check your PM. I prefer gdrive

I would be interested to

 

[Timmy19]

Okay, I will see if I can upload this somehow this evening, I will let you know how I got on tomorrow

Sent from my SM-F936B using Tapatalk

 

[Timmy19]

https://drive.google.com/drive/folders/1NFDY4zU41XGZFIhk_gzyglsKxKbc0AzK?usp=sharing

Sent from my SM-F936B using Tapatalk

 

[Timmy19]

I believe this is the dump, I will get the eid root key when I have more time and send you a link to this as well

Sent from my SM-F936B using Tapatalk

 

[Joonie]

I believe this is the dump, I will get the eid root key when I have more time and send you a link to this as well

Sent from my SM-F936B using Tapatalk

well. probably not needed, looks like it was previously on 4.31 then you updated to 4.90

 

[Timmy19]

Oh, at the time, I had no idea it had the 40nm

I'm guessing it's no good then?


Sent from my SM-F936B using Tapatalk

 

[Joonie]

Oh, at the time, I had no idea it had the 40nm

I'm guessing it's no good then?


Sent from my SM-F936B using Tapatalk

no.. I thought the unit was a brand new sealed.. apparently not and somebody must have updated to 4.31 at some point.

 

[Timmy19]

Oh no, the console was sealed. It was not sealed in a box. Sorry for the misunderstanding

Sent from my SM-F936B using Tapatalk

 

[Zoddhand]

if you've still got it open I would love the measurements (preferablly in mm) of the bracket sony used to prevent warping. Although i'm not sure how much good it really does but I could cnc/3d print it.

 

[Timmy19]

I can take some photos and get some measurements. I'm looking to get it 3D printed myself. Is there any scanning software I can use from my phone to create the 3D image?

Sent from my SM-F936B using Tapatalk