80010007 ERROR | CFW 4.87 Evilnat COBRA | PS3 FAT 40 GB NOR

[Dov]

Hi guys, so I followed this guide and successfully upgraded my FAT PS3 from OFW 4.75 to 4.87 Evilnat COBRA with no problems. I have a few PS3 ISOs on an ExFat harddrive. I ran PrepISO and tried to start a game, but I get a 80010007 ERROR.

Then, I went to run my ISOs through MultiMan but it won't recognize my harddrive (because it's formatted in ExFat?). So, I downloaded Irisman, which did recognize my harddrive and I copied my ISO files to the console's HDD, but running the game through Irisman throws a 80010007 ERROR, and running them through MultiMan, but MultiMan throws an ugly "invalid ISO" error.

What am I doing wrong? Some help would be appreciated.
Thanks.

 

[pinky]

I've seen this error before. what I'd suggest is reinstalling the firmware or downgrading to rebug 4.84 rex to see if the error follows.

 

[jcorrea]

Hi guys, so I followed this guide and successfully upgraded my FAT PS3 from OFW 4.75 to 4.87 Evilnat COBRA with no problems. I have a few PS3 ISOs on an ExFat harddrive. I ran PrepISO and tried to start a game, but I get a 80010007 ERROR.

Then, I went to run my ISOs through MultiMan but it won't recognize my harddrive (because it's formatted in ExFat?). So, I downloaded Irisman, which did recognize my harddrive and I copied my ISO files to the console's HDD, but running the game through Irisman throws a 80010007 ERROR, and running them through MultiMan, but MultiMan throws an ugly "invalid ISO" error.

What am I doing wrong? Some help would be appreciated.
Thanks.

80010007 means invalid ELF file. Possibly you will need to dump from disc again.

 

[Dov]

I've seen this error before. what I'd suggest is reinstalling the firmware or downgrading to rebug 4.84 rex to see if the error follows.

Thanks Pinky, I'll try that.

 

[Dov]

80010007 means invalid ELF file. Possibly you will need to dump from disc again.

I used Irisman to dump the ISOs from my extenal hd, to my PS3's HDD, was that sufficient? I don't have rebug since I'm on Evilnat, so Multiman won't recognize my ExFat ssd and I can't split up the files since I don't have access to any PS3 iso splitting up software. Let me know how to proceed here. Thanks.

 

[DeViL303]

Hi guys, so I followed this guide and successfully upgraded my FAT PS3 from OFW 4.75 to 4.87 Evilnat COBRA with no problems. I have a few PS3 ISOs on an ExFat harddrive. I ran PrepISO and tried to start a game, but I get a 80010007 ERROR.

Then, I went to run my ISOs through MultiMan but it won't recognize my harddrive (because it's formatted in ExFat?). So, I downloaded Irisman, which did recognize my harddrive and I copied my ISO files to the console's HDD, but running the game through Irisman throws a 80010007 ERROR, and running them through MultiMan, but MultiMan throws an ugly "invalid ISO" error.

What am I doing wrong? Some help would be appreciated.
Thanks.

Yeah, sounds like a bad dump. Dump your disc again or try another if you suspect it is scratched.

 

[Dov]

Yeah, sounds like a bad dump. Dump your disc again or try another if you suspect it is scratched.

Oh, they aren't physical disks, just ISO files.

 

[DeViL303]

Well if you did not dump them you do not know if they are any good.

BTW, you should read the rules here as piracy talk is not allowed, as you do not have the discs I have to assume this is piracy.

 

[TnA]

That's PIRACY, which we do not allow here!

Read the Forum Rules & Guidelines (which) you accepted upon registering!

RULE No.1: No Piracy Discussions allowed!

No warning this time, but a friendly reminder.

Thread closed!

 

[Dov]

That's PIRACY, which we do not allow here!

Read the Forum Rules & Guidelines (which) you accepted upon registering!

RULE No.1: No Piracy Discussions allowed!

No warning this time, but a friendly reminder.

Thread closed!

Well if you did not dump them you do not know if they are any good.

BTW, you should read the rules here as piracy talk is not allowed, as you do not have the discs I have to assume this is piracy.

Oh okay, we'll discuss in terms of ISO disks.

 

[jcorrea]

I used Irisman to dump the ISOs from my extenal hd, to my PS3's HDD, was that sufficient? I don't have rebug since I'm on Evilnat, so Multiman won't recognize my ExFat ssd and I can't split up the files since I don't have access to any PS3 iso splitting up software. Let me know how to proceed here. Thanks.

No, it's not sufficient. You need to dump from your blu ray discs, not just copy from an external hdd to internal hdd.

 

[DeViL303]

Oh okay, we'll discuss in terms of ISO disks.

Not sure what an "ISO disk" is, but dump it again.

 

[TnA]

I forgot to close the thread...

Anyway... Dump your original discs and these problems will likely be gone.