cobra 7.50 src

[kozarovv]

edit
oops, this counts only for norflash, stupid me. for nand it is way harder, so i wouldn't mess too much with cobra stuff on nand

Now think that my last ps3 was NAND. Is miracle i didn't bricked it with all that stuff that i done.

 

[0_obeWAN]

https://github.com/Joonie86/COBRA-7.3/tree/master/481/REX/BIN/release
Is ok I tested now.
Bad... This is CEX stage2 with debugging function enabled.

Thanks for Github link I downloaded and installed files fine

In case someone is on DEX mode, ever encounters stage2 brick,

There are two options to fix
For PS3 with NOR,
Swap HDD or format then it will wipe out dev_flash as well as bad stage2
For NAND (DEX) only,
Use any JB dongle to toggle FSM with lv2diag.self + PUP file on usb root.
This will wipe out devflash on NAND.
Those miserable users with CEX / NAND
= Teensy or Progskeet.

Sent from my iPhone using Tapatalk

It is my case I was on D-REX when I crash my console (I got the wrong file myself) No sreen and no boot after try reboot
I formated my HDD re install D-REX, swap kernel to cex and back finally to REX with cex kernel
Unfortunetly since that I don't have access no more to official stores Internet is OK (web) but stores no more pupup and sent me on page with error 80023017

Spoiler

@DeViL303 same with LaunchPAD If you got an idea where I'm failed, pls your help will be appreciate ​

 

[Joonie]

Thanks for Github link I downloaded and installed files fine


It is my case I was on D-REX when I crash my console (I got the wrong file myself) No sreen and no boot after try reboot
I formated my HDD re install D-REX, swap kernel to cex and back finally to REX with cex kernel
Unfortunetly since that I don't have access no more to official stores Internet is OK (web) but stores no more pupup and sent me on page with error 80023017

Spoiler

@DeViL303 same with LaunchPAD If you got an idea where I'm failed, pls your help will be appreciate ​

Check your np environment, yours is probably sp-int due to default setting from dex


Sent from my iPhone using Tapatalk

 

[bguerville]

Always check your np environment when you cannot connect anymore.. [emoji6]
It's a classic lately..

 

[0_obeWAN]

Check your np environment, yours is probably sp-int due to default setting from dex
Sent from my iPhone using Tapatalk

Thanks for your help
Yes it is sp-int and debug NP is off

Always check your np environment when you cannot connect anymore.. [emoji6]
It's a classic lately..

What's the correct configuration pls ?

 

[bguerville]

It's "np"
You should always refer to rebug.me/debug-settings when in doubt!

 

[0_obeWAN]

It's "np"
You should always refer to rebug.me/debug-settings when in doubt!

THANKS YOU SO MUCH all seems to be fine It is something like that I never find how to correct settings (reason I never go in Debug settings)

 

[bguerville]

You can use the rebug.me page for debug settings to know which are default & what those settings do.
It's also possible to reset those settings to default.

You should know that ProDG can also change those settings if you need.

 

[Omage]

Please,Developer could Porting ps2emu to mamba,thansks

 

[bguerville]

Please,Developer could Porting ps2emu to mamba,thansks

That's already done.
Use Mamba 3.1.4 from store.brewology.com.
It works on 4.81 cex & dex.

 

[Omage]

That's already done.
Use Mamba 3.1.4 from store.brewology.com.
It works on 4.81 cex & dex.

Mamba v3.1.4 fixed from store.brewology.com.
Can support ps2_netemu CONFIG ? Release 12/20/16
I hope new mamba support CONFIG function

 

[Joonie]

Mamba v3.1.4 fixed from store.brewology.com.
Can support ps2_netemu CONFIG ? Release 12/20/16
I hope new mamba support CONFIG function

Just replace the ps2_netemu with one from habib 4.81 v1.02 and repack the pkg


Sent from my iPhone using Tapatalk

 

[aldostools]

Mamba v3.1.4 fixed from store.brewology.com.
Can support ps2_netemu CONFIG ? Release 12/20/16
I hope new mamba support CONFIG function

Or download the PKG of Mamba/PRX Loader 3.1.4 uploaded today to Brewology.
It has been repacked with habib's ps2_netemu.self (resigned for 4.75, 4.76, 4.78, 4.80, 4.81) as suggested by @Joonie

 

[Red-j]

French installer for cobra 7.50 on rebug 4.81 dex or cex only http://www.logic-sunrise.com/news-911631-ps3-cobra-750-installer-habib.html

 

[mertal]

Cobra 7.50 src What does it do.... this file what should ı do ? sorry my english is bad

 

[Omage]

Just replace the ps2_netemu with one from habib 4.81 v1.02 and repack the pkg

I tryed replace ps2_netemu from habib 4.81 v1.02 & launch iso+config get blackscreen, launch other iso work fine, only support 4.81?
my cfw is ps3ita 4.75

 

[bguerville]

Cobra 7.50 src What does it do.... this file what should ı do ? sorry my english is bad

Broadly speaking, you either compile the Cobra source files yourself or download the precompiled binaries from Joonie's github repo. Then stage2.bin & the PS2emu files can be replaced on your cobra cfw by this new release.

 

[Joonie]

I tryed replace ps2_netemu from habib 4.81 v1.02 & launch iso+config get blackscreen, launch other iso work fine, only support 4.81?
my cfw is ps3ita 4.75

You were supposed to resign, try aldo's new mamba loader on brewology


Sent from my iPhone using Tapatalk

 

[bguerville]

I tryed replace ps2_netemu from habib 4.81 v1.02 & launch iso+config get blackscreen, launch other iso work fine, only support 4.81?
my cfw is ps3ita 4.75

Did you read Aldo's post #53? Have you not noticed that he mentioned resigning the ps2emu files for 4.7x?

 

[Omage]

You were supposed to resign, try aldo's new mamba loader on brewology

Edit:
solve
CONFIG rename is incorrect
Sorry

Another issue
psp_extra_savedata_patch 0x87540 (original)
Can't find savedata form (PSP to PS3)
psp_extra_savedata_patch 0x8753C
OK

0x8753C is correct?