PS3 Brick while using PS3Xploit incorrectly

[DeViL303]

I have got e3 flasher and was brick with ps3xploit

Ok, you will need to make your own dumps with the E3, as every console is different. I will let someone else explain what to do after that as I have never unbricked like this myself..

 

[Metinfield]

I wonder if I can publish my bkpps3 file here

 

[pink1]

I wonder if I can publish my bkpps3 file here

Don't do that you take the risk of someone taking your IDPS by posting your dump.
Have you used an E3 before?

 

[Metinfield]

idps is not important to me before i used e3 flasher

 

[pink1]

As long as you have a good dump you can just fallow this guide by @littlebalup. Its not in English so you may need to use the translate button on your browser.
http://www.logic-sunrise.com/forums...ne-ps3-suite-a-un-flash-ps3xploit-malheureux/

 

[Metinfield]

I applied this document but it did not work

 

[pink1]

At what part does it fail, after flashing back or while patching your dump?

 

[matnyaga]

I have got e3 flasher and was brick with ps3xploit

- Get dump with E3 flasher.
- Get many copies and download HxD.
- Use HxD to compare all copies to make sure they are identical.
- If so, download PS3 Game Dump Checker to scan dump.
- What was your Firmware Version?

 

[Metinfield]

My Fw Cfw Ferrox 4.82

 

[Metinfield]

bkpps3.bin

 

[pink1]

I'm trying to get it patched for you

 

[Metinfield]

Thank You

 

[pink1]

I sent you a pm with your patched dump. PS3DumpChecker shows no more errors.

PS. You can remove the link to your dump if you'd like.

 

[Metinfield]

thx I'm testing now

 

[pink1]

If you want to go back to CFW you'll need to patch the dump for it or use ps3xploit once you have OFW 4.82 running.

 

[Metinfield]

Ps3 Bkpps3.bin closes after 3 seconds after install

 

[Metinfield]

before my ps3 cfw

 

[pink1]

For a brick like this one from using the exploit on cfw do we just patch the dump for cfw again?
I'm trying to get fixing these down.

 

[Metinfield]

I was brick after I said I accidentally patch over the cfw device

 

[pink1]

I was just asking to see if anyone had any advice.
I'm reading now I know I've seen the answer here somewhere