PS3 super slim doesn't read or even spin discs

[sandungas]

@sandungas could you check this one? If it's ok I'm going for the RTX one.

Yes, is a perfect dump, thx a lot
For curiosity sake... the first byte in it (C0) matches with our theory, and the thermal config matches with PQX-001, i added a mention to it in this page (under CRC32:8E7F2A49)
https://www.psdevwiki.com/ps3/Syscon_Thermal_Configs

BTW, you can put the NOR NPX as a 40XX B/C, I didn't see it in a 42xx.

Done, im not completly sure if the NPX-001 was used in CECH-40xx series or CECH-42xx series... but littlebalup never found a NPX-001 used in a CECH-42xx either... so at this point i think is safe to assume the NPX-001 was used only in CECH-40xx series

 

[ElGris]

Yes, is a perfect dump, thx a lot
For curiosity sake... the first byte in it (0C) matches with our theory, and the thermal config matches with PQX-001, i added a mention to it in this page (under CRC32:8E7F2A49)
https://www.psdevwiki.com/ps3/Syscon_Thermal_Configs


Done, im not completly sure if the NPX-001 was used in CECH-40xx series or CECH-42xx series... but littlebalup never found a NPX-001 used in a CECH-42xx either... so at this point i think is safe to assume the NPX-001 was used only in CECH-40xx series

all the NPX I have are 40XXs, and three of them are the white edition, two from Brazil, one american. As littlebalup said, this mobo could be called 40XX V2, because it only has a RSX improvement over the MSX/MPX, and share the same model number.

EDIT: The american white 40XX is a MPX. My mistake.

 

[ElGris]

Done

 

[sandungas]

Done

Great
For curiosity sake... the first byte in it (D0) matches with our theory, and the thermal config matches with REX-001, i added a mention to it in this page (under CRC32:9991C242)
https://www.psdevwiki.com/ps3/Syscon_Thermal_Configs

Btw, this reports of the thermal configs for PPX-001 and RTX-001 are a milestone for the syscon thermal configs page in wiki because now we have samples of the factory thermal configs of all the PS3 retail motherboards
Thx a lot, your repots of the last days was very useful

 

[marianito1984]

I have a super slim, it had a fault in the graphics, wifi module and I had to reball the ram and cpu, because they had thermal paste of the worst quality underneath. The problem is that it doesn't allow me to open any application and it stays on a black screen, multiman, apollo, webmanmod, etc. From what I have read, it is the renesas, I have another console working and I tried removing the renesas, and I verified that the applications do not start, they remain on a black screen.