• PS3HEN is now supporting 4.93 Firmware

    View Official Release Post for additional information HERE
PS3HEN

PS3HEN PS3HEN - Official Release Thread (Homebrew Enabler for the PS3) v3.5.0 (4.93 support)

i have 0 issues using WebmanMod as FTP. I do not use Multiman, but we do test it and it works fine for us, so not sure where the issue is. We also test on clean systems


you probably have thousands of raps in that folder!



just use browser and load hen that way

http://**ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)/hen/enabler/flash/ (HEN 2.2.2 path)

then reinstall package or use FTP
Thank you very much, fixed, not gonna try that dumb shit ever again. Thanks a lot
 
But if you use multiMAN while webMAN activated when enable HEN it will give a black screen due to Memory problem, at first time worked for me, but others times I started have this problem, now use multiMAN without webMAN and works fine MM, maybe this problem they both use FTP Service

I disabled ftp service in mm but still get some freezes?
I need webman to control fan and mm to fully install my br games. That's the reason because I'm fighting to make both work at the same time.
If I only use webman, there's no ftp service problem, but I need to run mm while webman is controlling the fan and there's where my problems start.
Is there any other homebrew capable of fully install br games, so they can be run without using the br drive ?
I want to keep my br drive as new as possible. Playing some games with the disc inserted makes my ps3 sound like a matrix printer :bipolar:

By the way, irisman and magnagunZ also gets in conflict with webman. Freezes and shutdowns
 
I disabled ftp service in mm but still get some freezes?
I need webman to control fan and mm to fully install my br games. That's the reason because I'm fighting to make both work at the same time.
If I only use webman, there's no ftp service problem, but I need to run mm while webman is controlling the fan and there's where my problems start.
Is there any other homebrew capable of fully install br games, so they can be run without using the br drive ?
I want to keep my br drive as new as possible. Playing some games with the disc inserted makes my ps3 sound like a matrix printer :bipolar:

By the way, irisman and magnagunZ also gets in conflict with webman. Freezes and shutdowns
That really sucks!!
I think the problem is not in FTP Service, is in Memory when webMAN is open automatically after enabling HEN and then open MM, PS3 won't be able to open MM due to Memory problem, this problem can be fixed easily by Devs, I hope they fix this in next update. Will not be worth reinstall HEN always, reinstalling HEN won't solve the problems in webMAN, the problems are in webMAN not in HEN.

The webMAN is still very unstable in this last version (2.2.2). Even I downgraded webMAN 1.47.22 to 1.47n, and still gave black screen issues, the only good thing I saw was that you could take screenshots in-game.
 
Last edited:
i dont have Hybrid Firmware Tools how should i update my hen i installed hentai.pkg and then hen now i am unable to install the latest update plz help
 
I just got new external hdd today, and i want to play ps3 backup game via this hdd. How to do that?

Should i format it to fat32? Im never experienced any cfw except this hen. And now i have multiman and webman mod installed
 
i dont have Hybrid Firmware Tools how should i update my hen i installed hentai.pkg and then hen now i am unable to install the latest update plz help

U need to download manually latest hen_installer_hdd.pkg via **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new) , it works for me
 
Via Google Translate:

Hello guys. I have a question regarding offline installation. How do I run the HTML files from the "html" folder through the PS3 browser? I had difficulty understanding the tutorial (which is not friendly to beginners) to install 2.2.2 version. I tried the installation process through the address "http://**ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)/hen/installer/" (METHOD 1) in the PS3 browser; the console downloaded the "PS3HEN.p3t" file then nothing happens (remained in 2.2.1 version). In order for the whole process to be done correctly I ended up doing everything via the "**ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)" site directly. I accessed the options in this order: PS3HEN => 4.84 HFW => Enable HAN ReWrite Flash; only then I could install the "Latest_HEN_Installer_2.2.2_signed-484C.pkg" file via offline and everything was installed without problems (the new HEN logo appeared in the screen).
I want you to know that I am very grateful for this gift that is PS3HEN for my Super Slim, but please do a "noob friendly" tutorial, especially regarding full offline installation.


I used this guide for Android. Works the same for HEN as it did for HAN. I had a Mac so I couldn't do it for PC. Hope this helps but if you have to do it from PC just Google for PS3 miniweb tutorial.

https://www.psx-place.com/threads/tutorial-enable-han-with-webserver-android-offline-mode.17148/

Once you have HEN installed you don't really need this anymore as it activates offline now.
 
That really sucks!!
I think the problem is not in FTP Service, is in Memory when webMAN is open automatically after enabling HEN and then open MM, PS3 won't be able to open MM due to Memory problem, this problem can be fixed easily by Devs, I hope they fix this in next update. Will not be worth reinstall HEN always, reinstalling HEN won't solve the problems in webMAN, the problems are in webMAN not in HEN.

The webMAN is still very unstable in this last version (2.2.2). Even I downgraded webMAN 1.47.22 to 1.47n, and still gave black screen issues, the only good thing I saw was that you could take screenshots in-game.

I'll take it onto account. :encouragement:
I've disabled MC option on webman. I found somebody saying that this option enabled causes freezes.
I also have disableb all the scanning options fron Ps family and usb.
Will share my results
 
lol, thats just string search output dude!

offline usb installation can already be done, just by running HEN or using HTML. check OP and actually read it
i quit usb installation, no way to launch or run anything.

i ll use method 3, enought for me, i wont use any hack if no offline local alternative, so now i can run 2.2.2.

thanks to all.
 
Last edited:
I'm not all that familiar with hen/han, but you can run ps4 exploits offline in much the same way (index.html) using a sandisk connect and its offline cache. you normally have to connect to the computer/phone in order to update the cache, then you can use it offline, but you can do everything offline with a sandisk connect. that way you'll be offline always. you can get one for a few bucks. you don't need a large one either (4/8GBs).

you're not supposed to plug in the device. plug it in is just for adding updated exploit files, charging, or just using the usb. you can encrypt the content too by going into its settings (i.e accessing the device by typing in its ip address in a computer). you must disconnect from your router and connect to the sandisk connect like it's your router. just input all that info into the ps3/ps4. when you try to launch an exploit, the device needs to be unplugged0. the range isn't very good (maybe 5 feet), so just place it next to the system. that is what I use with the ps4. works perfectly. I do need to update my cache at some point with updated files.
 
I'm not all that familiar with hen/han, but you can run ps4 exploits offline in much the same way (index.html) using a sandisk connect and its offline cache. you normally have to connect to the computer/phone in order to update the cache, then you can use it offline, but you can do everything offline with a sandisk connect. that way you'll be offline always. you can get one for a few bucks. you don't need a large one either (4/8GBs).

you're not supposed to plug in the device. plug it in is just for adding updated exploit files, charging, or just using the usb. you can encrypt the content too by going into its settings (i.e accessing the device by typing in its ip address in a computer). you must disconnect from your router and connect to the sandisk connect like it's your router. just input all that info into the ps3/ps4. when you try to launch an exploit, the device needs to be unplugged0. the range isn't very good (maybe 5 feet), so just place it next to the system. that is what I use with the ps4. works perfectly. I do need to update my cache at some point with updated files.
thanks, but i have to tell im am the master of that system, i have many of them and from the beggining even when nobody suspected about that method y already use it for ps3 and ps4(converting code). no problem at all, just something in the usb method here is missing or unclear.
im launching method 3 from my own usb-wifi signal as always. thanks.
 
Last edited:
not sure. I've never used han/hen, but that's a method for exploiting the system offline. one of the problems is that older systems like the ps3, wii u, 360, even early ps4s use 2.4GHz. if you're using 5GHz on the pc to exploit your system, you won't make a connection. this is what I had to do with my wii u and my ps4.

on the wii u, I was connecting my wii u to my laptop via a proxy and ccproxy in order to block specific update urls. it won't make a connection now that I'm using 5GHz with my new router. my router uses both 2.4GHz/5GHz, but I prefer 5GHz. this also happens with my ps4 (an old phat).
 
configuration is the key, if you catch the trick each console need, no problem, but i never use router or wifi or ethenet to launch exploit on ps3 and ps4, just launch my own portable signal anywhere and no problem.
 
well, each band on my router uses a different ssid with different encryption keys, so it would be like the devices are connecting to a different router than the pc.
 
I updated my PS3 to HFW 4.84.2 and installed via XMB then via PS3 Recovery mode to install CFW on my ps3 but on ps3 Dump checker my ROS0 And ROS1 kept failing though i installed HFW twice so i tried it a few times then formatted my PS3 and installed HAN and i downloaded HEN V2.2.2 and everytime i Enable HEN My PS3 freezes why???
 
I updated my PS3 to HFW 4.84.2 and installed via XMB then via PS3 Recovery mode to install CFW on my ps3 but on ps3 Dump checker my ROS0 And ROS1 kept failing though i installed HFW twice so i tried it a few times then formatted my PS3 and installed HAN and i downloaded HEN V2.2.2 and everytime i Enable HEN My PS3 freezes why???

If you were going to downgrade, don't use HEN, use the HAN and the flash writer, make sure you have the hackable PS3 to avoid bricking. about your invalid ROS0/ROS1, I have no idea why you have such unless you post some screenshots of your result.
 
I used this guide for Android. Works the same for HEN as it did for HAN. I had a Mac so I couldn't do it for PC. Hope this helps but if you have to do it from PC just Google for PS3 miniweb tutorial.

https://www.psx-place.com/threads/tutorial-enable-han-with-webserver-android-offline-mode.17148/

Once you have HEN installed you don't really need this anymore as it activates offline now.
Unfortunately, this Android guide is not a viable method for me (my cell phone is not rooted). Anyway I managed to do the update for version 2.2.2 through method 3 of the PS3HEN minitutorial and everything is working well. Thank you for your attention, atreyu187.
 
Someone have files to install my PS3 in red theme with red icons like Rebug Ver? Someone can teach how to do that? I want PS3 in red theme! Sorry for being late :p
 
Back
Top