PS3 HAN PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers

Now Supports 4.84 HFW!

PS3Xploit Team has unveiled the latest progression in the form of an experimental Tool (Debug Settings Installer + Debug/XMB Swappers) for PS3Xploit v3 HAN user's (tools compatible with CFW also), with the release of REBUG REX that means a 4.82 DEX Firmware is out in the wild and that means with 4.82 DEX files, PS3 HAN user's will not have some added features and was one of the reasons why developer HABIB was suggesting user's stay on 4.81 for use of these DEX features as the status was unknown if a public 4.82 DEX would emerge, but with REBUG REX CFW release, the various files for swapping can be done, but devs will lend more details about that throughout this thread.
​

-STLcardsWS​

​

Release Notes >>>> How to Use <<<<

• 
  
  PS3Xploit v3 Debug Settings Installer + Debug/XMB Swappers​
  
  
  This tool is released for experimentation purposes only, it is not meant to be installed by every HAN user!​
  
  
  DO NOT TRY SIGNING INTO PSN WHILE DEX ENABLED, YOU CAN/WILL GET BANNED!​
  
  
  CHANGE YOUR NP ENVIRONMENT (thanks @Joonie) to invalid or anything else and reboot to block PSN access.
  
  
  
  This is a set of 3 tools for installing and swapping Debug Settings Files in flash​
  
  
  DEX XML Files Have Support For PS3Xploit/HAN Toolbox XML Menus​
  
  
  NOTE: Once Installed, You Have A DEX Hybrid and Must Choose DEX Checkbox To Use Exploits or Will Freeze! Restoring Is Simple, Just Replace Files With CEX For Your FW Version!​
  
  
  
  WARNING!
  This has the potential to corrupt your system and require you to install OFW (Original Firmware) if not used correctly!

  Power Down PS3 With The Power Button
  Insert USB Stick Into PS3 w/OFW PUP in Correct Folder (/PS3/UPDATE/PS3UPDAT.PUP)
  Push and HOLD Power Button (one beep) Until PS3 Shuts Itself Off (1 single beep + another single beep)
  LET GO OF THE POWER BUTTON
  From Power Off State, Push Power Button (one beep) and HOLD until you hear a single beep, then a double beep
  LET GO OF THE POWER BUTTON
  Plug in PS3 Controller and Select System Update

  
  Exploit Page(s):
  
  
  
  SUPPORTS OFW, HFW, and CFW
  
  HAN "DOES NOT" Need Enabled For This!
  
  UPDATE (2019-03-23): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.84 CEX/DEX!
  UPDATE (2018-04-11): ALL HAN TOOLS HAVE BEEN UPDATED TO SUPPORT 4.82 DEX!
  UPDATE (2018-04-18): DEX Menu Links Have Been Added To DEX XML (category_game_tool2.xml) thanks @DeViL303 >> GitHub Changes Here <<
  
  USE AT YOUR OWN RISK​
• 
  How To Use:
  
  1. 4.82 OFW: Download Debug Settings Installer ZIP archive
     4.84 HFW: Download Debug Settings Installer ZIP archive
  2. Extract the files
  
  to install DEX files + VSH: use files from INSTALL folder and run debug_settings_installer.html
  
  to install CEX files + VSH: use files from RESTORE folder and run debug_settings_installer.html
  
  Main Installation:
  
  • Place all files matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  Change Debug Settings Menu To CEX/DEX:
  
  • DEX is used as default settings and ONLY use this to swap between CEX/DEX versions of menu
    
  • Place sysconf_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  Change XMB Plugin To CEX/DEX (Hide/Show Host Info):
  
  • Place xmb_plugin.sprx matching your FW version and desired target [CEX/DEX] on USB flash drive or select one of the internal HDD options**
  • 4.82 OFW: Navigate to this link or use local files above and a webserver
  • 4.84 HFW: Navigate to this link or use local files above and a webserver
  
  
  Run the exploit from page and allow console to reboot fully
  Done! New Debug Settings/XMB Menu will take effect after reboot ​
  
  
  ** You can also create a package that holds resources or files to copy using Extra Tools and use this instead of USB as source. Default directories are /dev_hdd0/game/PS3XPLOIT/extras/ and /dev_hdd0/game/HANTOOLBX/files/​
  
  

Hosted on official site: **ps3xploit.com >Domain no Longer owned by team** (ps3xploit.me =new)
(v3 HAN Tools -> Extra Tools -> Debug Settings Installer)

Source Code @: github.com/PS3Xploit/.....
Forum @: psx-place.com​

 

haha yeah 4.82 offsets are different.

i can make 481/482 enablers

test this: http://**ps3xploit.com >Domain no L...ew)/autoxml/han/han_enabler_auto_dex_482.html

Currently on 4.82 with toolbox 0.4 so I dont have dex checkbox, and I have tried this link above but it's "not found"?

 

Currently on 4.82 with toolbox 0.4 so I dont have dex checkbox, and I have tried this link above but it's "not found"?

bro im on 4.82 can you help me with th debug installer

 

bro im on 4.82 can you help me with th debug installer

just follow instructions exactly as mentioned and use the right usb slot on ps3. I had no problems.

Also set each webpage to homepage then reopen browser and try it

 

what op

Surgical op, vasectomy I think, sad story, he only went in for a check up..

Seriously though, set the page you want to use as homepage first, close the browser then open it again, will increase chances.

 

ok ill try it

 

if I install this tool, will I be able to use multiman?

 

if I install this tool, will I be able to use multiman?

No.

 

I know this isnt the right place to post this but I havent install the degub settings but just a few minutes ago when I enable han my ps3 freezes.
It is the auto enabler that freezes

 

I'm with a CECH-2511A 4.82 OFW and the installer isn't initializing. Tried several times. Something like this happened with the HAN Installer too and in that occasion, some days later, I tried again and worked flawlessly.

 

I'm with a CECH-2511A 4.82 OFW and the installer isn't initializing. Tried several times. Something like this happened with the HAN Installer too and in that occasion, some days later, I tried again and worked flawlessly.

Its just luck, its related to timing, just keep trying, if you have issues set the page you are trying to use as your homepage.

 

I'm with a CECH-2511A 4.82 OFW and the installer isn't initializing. Tried several times. Something like this happened with the HAN Installer too and in that occasion, some days later, I tried again and worked flawlessly.

set the page to homepage and re-open browser, i get almost 100% success rate this way

 

ok so for step 2 i install both 4.82 thing for the swapper and thats the only thats should be on usb

 

ok so for step 2 i install both 4.82 thing for the swapper and thats the only thats should be on usb

after installing the debug settings, i wiped my usb and grabbed both files under 4.82 dex (since thats my FW) and put them on the usb with nothing else on it and it worked fine, just remember to tick the dex box or u will get freezing

 

but there the same thing

 

Surgical op, vasectomy I think, sad story, he only went in for a check up..

Seriously though, set the page you want to use as homepage first, close the browser then open it again, will increase chances.

WORKED ON FIRST TRY! What kind of magic is this???

 

i am aware of the HAN Enabler situation on 4.82 DEX. This is being addressed now

 

but there the same thing

dude just follow the instructions in OP lol

 

the files for 4.82 are the same

 

So we can play games now with dex han . But still not online am i right @esc0rtd3w @DeViL303

 

do i only install the one 4.82