- Thread starter STLcardsWS
- Start date
Joonie
Developer
I don't understand what your issue is, Are you saying webMAN does not work on DEX mode?
No Joonie, what I am saying is this.
Am on DEX 4.75.3, all settings in Rebug Toolbox on DEX & TargetID rewritten to DEX.
If I use the CEX kernel, I have absolutely no problems however as soon as I swap to DEX kernel (using the Toolbox), after reboot there are anomalies such as:
1. Plugin startup notifications not displayed (even though the plugins are loaded & functional)
2. wMM Dynamic fan control looks like it's working in cpursx page but the fan stays idle even when the temperature reaches syscon max level.
3. Movian starts but crashes when I open a movie.
There might be more than this but this is what I have noticed in the little time I had.
Sent with Tapatalk
Joonie
Developer
Weird, I don't think I had a problem like that before? does that happen on stock condition too? or this all happened after webMAN update?
That's the thing, I don't remember having these problems with wMM before the most recent versions..
With Movian, I have had this problem with DEX for a while. Maybe I should test older CEX & DEX showtime packages. Same goes with wMM I suppose.
Sent with Tapatalk
Joonie
Developer
my CECHA01 is on 4.75.3 DEX mode, and I use movian everyday, just finished watching Starwars ep1~6, and I don't understand what issue you're dealing with.
My wMM is currently on 1.43.13 though.
Remember a little while ago, you told me to reinstall the movian pkg after I told you about the problems I experienced while in DEX.
I did so. Deleted the movian installation, reinstalled it all but no changes, If I use the DEX kernel, as soon as a movie starts (decoding launches), there is a 50-50 chance that Movian crashes immediately & shuts down. Restarting movian after such a crash & trying to play the same movie again, always leads to the exact same crash....
Sometimes it works but more often than not, it crashes.
I use Movian everyday so recently I have had to return to CEX kernel & only swap to DEX kernel when needed. Not a huge problem really however I do not understand...
About wMM, let me install 1.43.13 like you & try. I'll report after.
Sent with Tapatalk
lennypenny
Forum Noob
Okay, so I've done a little more testing with my drive along with my ISOs. I still get my ISOs recognized from NTFS on my 2 TB drive using webMAN. The games still give error! message when launching them from either xmb or from web browser.
Now on to the positive part of this equation I'm trying to get solved. I take the suggestion to launch IRISMAN 3.50.5 and try to run my ISOs from the 2TB NTFS drive. The ending results come back positive. It mounts the game and takes me back to xmb.
I then proceed to see the disc icon in xmb with the current title I am going to launch. I launch the game and wait a few seconds to see that the game does indeed load the ISO from the NTFS 2TB drive.
I was using genps3iso 2.5, webMAN 1.46.18, REBUG 4.76.1 LITE, IRISMAN 3.50.5.
Now on to the positive part of this equation I'm trying to get solved. I take the suggestion to launch IRISMAN 3.50.5 and try to run my ISOs from the 2TB NTFS drive. The ending results come back positive. It mounts the game and takes me back to xmb.
I then proceed to see the disc icon in xmb with the current title I am going to launch. I launch the game and wait a few seconds to see that the game does indeed load the ISO from the NTFS 2TB drive.
I was using genps3iso 2.5, webMAN 1.46.18, REBUG 4.76.1 LITE, IRISMAN 3.50.5.
Last edited:
Joonie
Developer
I think your cobra is disabled on dex mode, perhaps you tried updating payload by yourself manually, that explains why prx loading doesn't work I assume, check your dev_flash/rebug/cobra/
Sent from my iPhone using Tapatalk
So, the isos seem fine if they work with Irisman.
What kind of error do you get on launch?
Have you tried manually deleting the contents of wmtmp or via setup page then run prepNTFS 1.12.
Once done, try again to mount & launch.
If you copy your iso in /dev_hdd0/PS3ISO, can you launch the game with webMAN-MOD?
Sent with Tapatalk
Well right enough, I did update the Cobra files to 7.2 manually but I fail to see what I could have done wrong... I used the right files...
Sent with Tapatalk
lennypenny
Forum Noob
Okay, so I tested the idea of an ISO from /dev0_hdd/PS3ISO and it works using webMAN 1.46.18.
The error I would get from launching an ISO from my 2 TB external hdd would be something along the lines of "Error! dev0_hdd/tmp/wmtmp/BLESXXXXX-TITLE.ntfs[PS3ISO]"
The error I would get from launching an ISO from my 2 TB external hdd would be something along the lines of "Error! dev0_hdd/tmp/wmtmp/BLESXXXXX-TITLE.ntfs[PS3ISO]"
I have had this exact same problem several times before with isos on my NTFS drive. It was caused every time by corrupted .ntfs "link" files to games.
I fixed the issue by following the simple steps I described before. Give it a try, it might work for you.
Erase all the existing .ntfs files in wmtmp folder manually then launch PrepNTFS 1.12 (no need to refresh xml afterwards as it does it automatically now). Once the .ntfs files have been recreated, you should be able to launch your games.
Sent with Tapatalk
lennypenny
Forum Noob
I deleted from the wmtmp to start fresh and ran prep ntfs 1.12. It still gives "error!" from xmb using webMAN for the NTFS 2TB drive.
That's very strange.
How did u say mCM reacted to your isos? Can you mount with it? Launch?
Could it come from the external hdd? Have a look at ps3devwiki's page about hdd. Lots of useful info there.
Also have you checked your boot_plugins.txt, maybe you could use replace the Rebug webftp_server.sprx in /dev_blind/vsh/nodules vt tge Rebug PS3MAPI Cobra... version in the updater folder. (unless you want to compile it yourself.
Toy should also try an older wmM version just in case.
Sent with Tapatalk
lennypenny
Forum Noob
If I try to use mmCM, it tells me a warning when I try to mount an iso. It tells me "WARNING The disc image selected is not a compliant PS3 ISO, but you still may be able to access it in other applications."
Weird...
Have had the same webman problem but never this with mCM.
What happens if you disable Cobra & use multiMAN. Same message ?
Sent with Tapatalk
Have had the same webman problem but never this with mCM.
What happens if you disable Cobra & use multiMAN. Same message ?
Sent with Tapatalk
LizZo
Member
[MENTION=89]aldostools[/MENTION]
Hi Aldo!
There is a Bug with the VSH Menù!
I and a lot of people have the same problem.
VSH Menù said v 1.06, and it is very slow and buggy! It cause also Freezes.
Before install it, i' ve deleted the previous version of WebMAN (and vsh too). I' ve tried to install it in all of the possible ways, but still have that bug.
Hope u can get a look! Thanks for all
Hi Aldo!
There is a Bug with the VSH Menù!
I and a lot of people have the same problem.
VSH Menù said v 1.06, and it is very slow and buggy! It cause also Freezes.
Before install it, i' ve deleted the previous version of WebMAN (and vsh too). I' ve tried to install it in all of the possible ways, but still have that bug.
Hope u can get a look! Thanks for all
[MENTION=89]aldostools[/MENTION]
Hi Aldo!
There is a Bug with the VSH Menù!
I and a lot of people have the same problem.
VSH Menù said v 1.06, and it is very slow and buggy! It cause also Freezes.
Before install it, i' ve deleted the previous version of WebMAN (and vsh too). I' ve tried to install it in all of the possible ways, but still have that bug.
Hope u can get a look! Thanks for all
If it is very slow and buggy... my suggestion is that don't use it or try using an older version. I can't fix a bug that I'm not having.
Similar threads
-
MPS5 {Modded Warefare} Overview & Setup of etaWEN v2.2B from LigthingMods
- Started by MODDED WARFARE
- Replies: 1
-
-
MYouTube - Modded Warefare [PS5] New etaHEN 2.0B & Itemzflow 1.09 Fully Released with 5.xx / 6.xx fw support for PlayStation 5
- Started by MODDED WARFARE
- Replies: 0
-