PS3 4.70 HABIB Starbucks (Cobra v7.10) v1.02

Custom Firmware developer HABIB has made official the release of v1.02 of his 4.70 HABIB Starbucks (Cobra v7.10) CEX CFW advancing the previous (same) OPEN BETA PUP recently released as the official one. So if you installed the OPEN Beta then you are good to go, for user's who were waiting for the official release rest assured Habib's test went as expected and the developer has signed off on the firmware.. In v1.02 the developer has made alot of improvements to ps2_netemu (PS2 for nonBC Consoles), while Habib in recent months was able get around the wireless controller sync on PS2 ISO[break]ss[/break] past 4.46 CFW the problem for the 2nd, 3rd,. 4th ect.. controllers was still an issue, but now that is also a problem of the past with this update. Also since 4.50+ PS2 Classic format games used unencrypted mem card, with this update it has now been corrected by the developer.No more "classic_ps2 flag is needed and additional improvements that can be seen in the section marked as v1.02 below

​

4.70 HABIB / COBRA (v7.10) -- v1.02

FEATURES

UPDATE Version 1.02 ​ PS2 ON NON-BC since cobra 4.50++ classics used unencrypted mem card, its now fixed no more classic_ps2 flag is needed, if iso mounted, run placeholder/legit ps2 npdrm and iso will boot(do notice we need classics mem card not the unencrypted one) new method adapted in which disc icon for ps2 is not affected at all, just sync lose there INSTRUCTIONS: Maintain the sync of controllers on XMB and mount the game through launcher if any instruction is unclear, please see release threads of rebug 4.65 and habib 4.66/4.70

UPDATE-- Version 1.01 FIXED PS3MAPI IDPS SET AND ASSOCIATE APPS CREATING BUGS(E.G WEBMAN) FIXED PS3MAPI FW DETECTION

Initial Release 1.00

MADE OUT OF 4.70 OFW

COBRA v7.10 ADDED (see below)

HAVE INSTALL PACKAGE FILES AND APP_HOME

HAVE REACTPSN COMPATIBILITY

IT CAN RUN GAMES SIGNED WITH KEYS UP TO 4.70

CAN BE UPDATED OVER ANY CFW.

CAN BE UPDATED OVER 3.55 OFW

SPECIAL PAYLOAD FOR COBRA TOGGLE IN LV2

RSOD BYPASS

REMOVED CINAVIA DRM FOR HDD CONTENT

REMOVED CINAVIA FOR BDMV

REMOVED CINAVIA FOR BDVD

QA FLAG ENABLED BY DEFAULT IF PS3 WAS QA ON 3.55

PATCHES

PATCHED LV0 TO DISABLE ECDSA CHECKS

PATCHED LV2 TO ADD PEEK/POKE SUPPORT

PATCHED LV1 TO DISABLE LV2 PROTECTION

PATCHED LV1 TO ADD PEEK/ POKE SUPPORT

REACTPSN OFFLINE PATCH ADDED

COBRA v7.10

Changes in Cobra 7.03 -7.10

Additional PSX ISO Types supported

PS2 ISO controller sync issues on non-BC improved by great margin (100% fine for me)

Updated NzV ps3mapi to v1.2.0

Polished a bit overall

Issue with new ODE Patches while COBRA is disabled has been fixed (games with updates refuse to run)

Videos

[video=youtube;uiY1e2t2oqE]https://www.youtube.com/watch?feature=player_embedded&v=uiY1e2t2oqE[/video] Small demostration of v1.00 by the developer (Habib) [video=youtube;ojOoXryTcNo]https://www.youtube.com/watch?feature=player_embedded&v=ojOoXryTcNo[/video] Joonie demostrats HABIB's fix of the PS2 Controller Sync Issues with multiple DualShock 3 Controllers Donation to HABIB can be made via: PayPal btw guys i broke my phone, PLEASE help me out with a small contribution if you want me to countinue to reply to you guys -Source

USE ANY CFW AT YOUR OWN RISK View ---> LINK <--- for CFW installation Tips & Info

DOWNLOAD & MIRRORS

4.70 HABIB COBRA (v7.10) v1.02 -No current Mirrors- MD-5: 87A9F34934178818AA4244722C6BC6ED

Source: PS3Hax
​

---

Useful CFW links here at PSX-Place.com: -- > CFW Downloads / PS3 CFW Forums / PlayStation 3 Index
​

 

awesome thank you

 

Pal Games Problem.

Those Darn PSX iso's....

I'm getting a video error with Pal format PSX ISO's. I have a CECHA01 and it gives the error " You cannot play this game at the current video output setting. (80028F10)". The last CFW to work was HABIB_4.65_V1.02. I was hoping that 4.70 HABIB Starbucks (Cobra v7.10) v1.02 would not have the issue but no such luck.

Anyone here on a CECHA01 that can load PSX Iso's like Earthworm Jim 2, or the Crash Bandicoots.

Thanks,
MM

 

Those Darn PSX iso's....

I'm getting a video error with Pal format PSX ISO's. I have a CECHA01 and it gives the error " You cannot play this game at the current video output setting. (80028F10)". The last CFW to work was HABIB_4.65_V1.02. I was hoping that 4.70 HABIB Starbucks (Cobra v7.10) v1.02 would not have the issue but no such luck.

Anyone here on a CECHA01 that can load PSX Iso's like Earthworm Jim 2, or the Crash Bandicoots.

Thanks,
MM

I will try on my CECHC soon..today..and will report it to you...

...but isnt wrong display setting..maybe?

Have Crash Band 1-2-3...for my family...will test it...

 

All wireless sync working as it should. I just had one weird experience. I was testing sled storm, I paused the game, I went to grab a can of coke & when I came back my ps3 had switched it self off. Strange. CECH-2003b

 

Those Darn PSX iso's....

I'm getting a video error with Pal format PSX ISO's. I have a CECHA01 and it gives the error " You cannot play this game at the current video output setting. (80028F10)". The last CFW to work was HABIB_4.65_V1.02. I was hoping that 4.70 HABIB Starbucks (Cobra v7.10) v1.02 would not have the issue but no such luck.

Anyone here on a CECHA01 that can load PSX Iso's like Earthworm Jim 2, or the Crash Bandicoots.

Thanks,
MM

CECHC Samsung 3D 55 inch Crash Bandicot PSXISO / Crash Bandicot 3 PSXBIN(CUE) with all "display setting full", and "game settings" both "full screen and On"...works like a charm...no issue.

All wireless sync working as it should. I just had one weird experience. I was testing sled storm, I paused the game, I went to grab a can of coke & when I came back my ps3 had switched it self off. Strange. CECH-2003b

Maybe your can of coke took too much time..and the power save worked...

 

Thanks for the follow up szunyi84!!

I've got access to 2 CECHA01 unit's, mine and my cousins and they both do the same thing. I looked up the CECHC and the wiki says it's software EMU so that may be the reason. I had asked about the same error in the latest Rebug CFW thread and it looks like reason it happens is kinda unknown. I think is got something to do with hardware backwards compatibility vs the software.

Thanks,
MM

 

Try different video setting, smoothing, upscaling, etc. After excluding this, someone can try to help you.

Temporary solution is to use Retro XMB and make PSone classic this give you possibility to use netemu.

 

[MENTION=20]habib[/MENTION] [MENTION=29]Joonie[/MENTION]

UPDATE Version 1.02
PS2 ON NON-BC
since cobra 4.50++ classics used unencrypted mem card, its now fixed
no more classic_ps2 flag is needed, if iso mounted, run placeholder/legit ps2 npdrm and iso will boot(do notice we need classics mem card not the unencrypted one)
new method adapted in which disc icon for ps2 is not affected at all, just sync lose there

this function is implemented in rebug 4.70?

 

No, but you can manual change emu in rebug to that one from habib. But then classic_ps2 is still needed. Because that part is done in stage2.bin so can't be just copied as binary to rebug without problem.

 

BY THE WAY YOU ARE WRONG IN WHAT YOU WERE SAYING ALSO. YOU DO NOT GET BANNED FOR GOING ON TO PS STORE. I BEEN GOING ON IT FOR 3 YEARS ON ORIGINAL DETAILS NO CONSOLE ID SPOOFING. I USE PSNPATCH WITH REBUG I NEVER HAD ANY ISSUES WITH BEING BANNED ONLINE AS I RESPECT THE NETWORK. EVEN BEFORE PSNPATCH I WOULD NEVER GET BANNED ON ORIGINAL DETAILS AND NO CID SPOOFING, BECAUSE YOU HAVE TO BE SMART AND BE RESPECTFUL TO THE NETWORK.. 90% of Console Bans on PSN are from the user doing something shady or dumb on the network.

[MENTION=2]STLcardsWS[/MENTION]


Terribly sorry for this...i told this about personal experience..last year i downloaded destiny demo from PS Store and I got banned next day...but should know the true, i didnt use PSNPatch at that time...

Sorry everybody...I really ashamed...

(...and i didnt read the rules before this sorry....)

 

wrong
klicensee is needed for .bin.enc decryption
do restore default setings, delete all the raps, try again
and it'd be better if you tell your ps3 model

I know that klicence is needed but what deleting of all raps give him? If rif is not "installed" or corrupted then he should just see error when starting placeholder. Or i'm wrong here? Even if i'm wrong why just don't delete rif from flash and then do rap-rif converion in psnpatch or reactpsn again?

 

[MENTION=2]STLcardsWS[/MENTION] Update TOPIC

Because of an issue with Habib's STARBUCKS CFW (causing the PS3 to stop at blackscreen when launching multiMAN, waiting for a connected controller on port #1 ) you can replace the stage2.cex with the one from my link. Do this ONLY if you're running the "starbucks" version of the CFW.


http://www.deanbg.com/stage2_cex_habib_4.70_v1.02.zip

1) Download to your PC
2) Unzip the stage2.cex file
3) FTP it to your PS3 (with /dev_blind enabled by webMAN or multiMAN) to /dev_blind/habib/cobra folder to replace the buggy one.

The only change is at offset 0x10AE0 where you can see the path to mM's EBOOT.BIN (changed to BLES0000/USRDIR/EBOOT.000).

Dean

Source : psx-scene.com

 

Is PS2 iso compatibile stage2.cex? Or we lose auto mounting PS2 isos. Without flags?

 

Is PS2 iso compatibile stage2.cex? Or we lose auto mounting PS2 isos. Without flags?

there should be no problem
however if you are on my cfw and older multiman, it will work fine
im updating my cfw properly and will be released soon

 

Cool Starbucks (Cobra v7.10) v1.03 in the way :chewy:

[MENTION=20]habib[/MENTION] : I hope PS2 ISO LAUNCHER 1.03 will be integrated for the next release

 

Cool Starbucks (Cobra v7.10) v1.03 in the way :chewy:

[MENTION=20]habib[/MENTION] : I hope PS2 ISO LAUNCHER 1.03 will be integrated for the next release

its a big pkg, cant be added

https://www.youtube.com/watch?v=LkC4m5HA-Ss

 

its a big pkg, cant be added

https://www.youtube.com/watch?v=LkC4m5HA-Ss

awesome nice Big thanx and big respect [MENTION=20]habib[/MENTION] :dancestraw:

 

Release Habib 4.70 v1.03 Cobra!

 

Great work guys

Excellent work guys, worked perfectly with 2 wireless controllers in PS2, just need support for loading isos in external usb and will be perfect

 

Excellent work guys, worked perfectly with 2 wireless controllers in PS2, just need support for loading isos in external usb and will be perfect

Haven't ever had that support, and don't see it happening anytime soon tbh