PS3 [BG Toolset] User Issues and Dump Submissions

[bguerville]

PS3 Model: CECH-G01
Firmware Version: 4.85
IDPS Is Masked: YES
Have Original Dump: NO
Dump 1 URL:
Have Patched Dump: NO
Dump 2 URL:
System Boots To XMB: Yes
System Boots To Recovery: Yes
Firmware Version Displayed In Recovery: 4.85
Minimum Firmware Version Displayed In Toolset: 1.0
Disc In Drive: NO

good night could you help me I have a problem trying to update from 4.85 to 4.86 is the error 8002f169 thanks

I see nothing wrong in the screenshots, my guess at this stage is that the PS3 Toolset did its job correctly & your issue comes from something else.

However, you forgot to explain what you did so far, you will need to clarify a few points so I can better understand where you are at.

1. Before you first used the PS3 Toolset, were you already on CFW 4.85 (if so which one?) or on OFW 4.85?
2. If you were on OFW 4.85, did you just apply the 4.85 no-fsm patch using the PS3 Toolset then restarted the console & loaded the PS3 Toolset again?
3. What 4.86 firmware are you trying to install now? OFW or CFW (if so which one)?
4. Did you make sure that the pup file you are trying to install is not corrupted (md5 hashes check), correctly named in caps/PS3/UPDATE/PS3UPDAT.PUP) & that the usb dongle is properly formatted (fat32/mbr) & that you are not using a USB hub or whatever.
5. Did you try to install the 4.86 firmware pup from the XMB or from recovery mode?
6. Is everything working on your console? Bluray drive, Bluetooth etc.?

 

[David172m]

1. when i try to install cfw i was on fw 4.85

2. if you apply the patch and don't load the toolset try to install cfw

3. I am trying to install the official firmware 4.86

4. if the fw is ok even download several and if they are correctly renamed try also with several usb and none works

5.
try installing them on both xbm and recovery

6. in the console everything works bluray wifi and bluetooth reader

 

[David172m]

there is another thing when trying to update via wifi it throws an error where it says that the data is damaged

 

[bguerville]

You should try installing the Rebug Lite 4.85.1 pup file.

 

[David172m]

I would have to do the steps in toolset

 

[bguerville]

I would have to do the steps in toolset

No, the patch has already been applied, the console is jailbroken, there is no need to do it again. The jailbreak would only be removed if you successfully installed OFW.

Right now, you just need to go to recovery mode & run the update feature with the Rebug Lite 4.85.1 pup on usb.
If you get an error, take a screenshot & post it.

Btw when did you first patch the console with PS3 Toolset? Recently or 3/4 months ago when it was released?

 

[David172m]

Okay I will try to install the Rebug.

if i think it was in april try to install the cfw with toolset

 

[David172m]

the first photo is in recovery mode and the second photo try to install it from the xmb menu of the console

 

[bguerville]

the first photo is in recovery mode and the second photo try to install it from the xmb menu of the console

OK now I understand... ;-)

In PS3 Toolset 1.0.20 & 1.0.21 there was a bug that could affect NAND consoles. That bug was fixed on 04/04/2020 with the PS3 Toolset 1.0.22 release.

It appears that you used the PS3 Toolset before that date but don't worry, you only need to make a NAND dump using the PS3 Toolset 1.0.22 & send the file by pm to @esc0rtd3w.
In return, esc0rtd3w will send you a URL to use & instructions to fix the issue by applying an alternative patch.

Ps: the dump will be a big file (200+Mb) so you should upload it to a file server then send the url to esc0rtd3w.
Read the OP for instructions on masking your idps in the dump file.

 

[David172m]

ok i will send the link

 

[David172m]

this is the nand link if you can help me solve the update problem

https://www.mediafire.com/file/z0igmh1hdwrnnfo/Masked_dump.hex/file

 

[David172m]

Modelo de PS3: CECH-G01
Versión de firmware: 4.85
IDPS está enmascarado: SÍ
Volcado original:
Volcar URL 1:https://www.mediafire.com/file/z0igmh1hdwrnnfo/Masked_dump.hex/file
Volcado parcheado: NO
Volcado 2 URL:
El sistema arranca en XMB: Sí
El sistema arranca para la recuperación: sí
Versión de firmware que se muestra en la recuperación: 4.85
Versión mínima de firmware que se muestra en el kit de herramientas: 1.0
Disco en unidad: NO

 

[bguerville]

this is the nand link if you can help me solve the update problem

https://www.mediafire.com/file/z0igmh1hdwrnnfo/Masked_dump.hex/file

@esc0rtd3w already knows about you but he has been busy dealing with other matters, he will contact you as soon as he is able to. Please be patient & keep an eye on your private messages.

 

[David172m]

Okay

@esc0rtd3w already knows about you but he has been busy dealing with other matters, he will contact you as soon as he is able to. Please be patient & keep an eye on your private messages.

ok thanks friend

 

[esc0rtd3w]

Modelo de PS3: CECH-G01
Versión de firmware: 4.85
IDPS está enmascarado: SÍ
Volcado original:
Volcar URL 1:https://www.mediafire.com/file/z0igmh1hdwrnnfo/Masked_dump.hex/file
Volcado parcheado: NO
Volcado 2 URL:
El sistema arranca en XMB: Sí
El sistema arranca para la recuperación: sí
Versión de firmware que se muestra en la recuperación: 4.85
Versión mínima de firmware que se muestra en el kit de herramientas: 1.0
Disco en unidad: NO

PM sent with instructions. Thanks!

 

[David172m]

PM sent with instructions. Thanks!

gracias hermano

 

[aoshiv2]

PS3 Model: CECH-2001A
Firmware Version: 4.86
Firmware Type: OFW CEX
IDPS Is Masked: Yes
Have Original Dump: Yes
Dump 1 URL: https://mega.nz/file/kEghHSRY#XFpZlikEVH7SxFtDk3f8WUZmLou-yyMpHZUlrhhNLuM
Have Patched Dump: NO
Dump 2 URL:
System Boots To XMB: Yes
System Boots To Recovery: Yes
Firmware Version Displayed In Recovery: 4.86
Minimum Firmware Version Displayed In Toolset: 1.0
Disc In Drive: No

Hi devs,
I'm having a problem downloading the flash memory patch, it asks to wait, it takes a long time and then the error 80710D23 appears

Please help me.

Thank you.

 

[aoshiv2]

PS3 Model: CECH-2001A
Firmware Version: 4.86
Firmware Type: OFW CEX
IDPS Is Masked: Yes
Have Original Dump: Yes
Dump 1 URL: https://mega.nz/file/kEghHSRY#XFpZlikEVH7SxFtDk3f8WUZmLou-yyMpHZUlrhhNLuM
Have Patched Dump: NO
Dump 2 URL:
System Boots To XMB: Yes
System Boots To Recovery: Yes
Firmware Version Displayed In Recovery: 4.86
Minimum Firmware Version Displayed In Toolset: 1.0
Disc In Drive: No

Hi devs,
I'm having a problem downloading the flash memory patch, it asks to wait, it takes a long time and then the error 80710D23 appears

Please help me.

Thank you.

I solved the problem, I saw this post from bguerville in another topic and I did, everything worked out.

Thanks!

 

[singedxd]

I solved the problem, I saw this post from bguerville in another topic and I did, everything worked out.

Thanks!

I solved the problem, I saw this post from bguerville in another topic and I did, everything worked out.

Thanks!

As a friend, you solved the problem, I have the same problem, I am left with the screen that says "please wait" and then I get an error the same as yours, all at the moment of hitting flash memory patch, explain to me how you solved it ? I want to install CFW, the model of my ps3 is CECHE11, please help me, or someone who knows how to solve it?

 

[singedxd]

There it stays in Please wait, and from there I get an error and it won't let me download the file to my USB: c