PS3 Compatibility List - PS2 on PS3

lex3a said:
Code: 
Config file revision cmd: 3D 00 00 00, revision: C3 42 00 00

EE Overlay patch cmd: 42 00 00 00, address: 00 FF 0F 00, count: 07 00 00 00
patch data: 50 00 02 3C 00 19 42 24 50 00 03 3C 80 22 63 24 24 00 42 AE F1 59 0E 08 28 00 43 AE
-----------------------------------
lui v0, 0x50
addiu v0, v0, 6400
lui v1, 0x50
addiu v1, v1, 8832
sw v0, 36(s2)
j loc_003967c4
sw v1, 40(s2)
-----------------------------------

EE_INSN_REPLACE32: 0A 00 00 00, count: 01 00 00 00, offset: A4 67 39 00, original opcode: 24 00 40 AE, replaced opcode: C0 FF 03 08
-----------------------------------
in function: 0x00396748
orinal opcode: sw zero, 36(s2)
replaced opcode: j loc_000fff00
-----------------------------------

VSYNC delay cmd: 48 00 00 00, arg1: 01 00 00 00 (NO IPU), arg2: 90 D0 03 00 (Agressive = 0x3D090 (250000 decimal))

Config terminator cmd: 00 00 00 00, no title ID enforcment: 00 00 00 00
Click to expand...

Excuse me, is this some kind of software which does produce such logs? Or is it just your write-up?
 
lex3a said:
Unfortunately, it's a manual write-up
Click to expand...
Damn i was also thinking that is some automated output, my notes about game patches usually looks like that :

Code: 
1FAC90

fog 001FB074
grain 001FB334
silent hill filter - fps boost 0020FC88 14400071

And all that in file called New11, when i'm already on file New29. Later after few days i'm figuring out wtf is that, and which game use it. :D
Above is for Nam 67 Shellshock. iirc..
 
Oh man, you guys do not want to see my notes...especially for Melty Blood the past couple of days. Probably over 200 different lines of patches are in that file, most being unlabeled and some labeled with very unclear messages.

So many patches, so little progress... :oops:
 
AceJGamerSE said:
I ran on hen 3.0.2 and use ps2 classics and webman for ps2iso
I wanna to be able to play crash twinsanity again but whatever I try it freezes. Any help please?
Click to expand...
Enter aldo's config database http://ps3.aldostools.org/ps2config.html ,go on (CUSTOM + NET + GX + SOFT) and choose ENC PS2 Classics. Download the ENC config SLES or SLUS depending on your game ID and Version and rename the config to the same name of your game adding the .config extension to it for example game name : Crash Twinsanity.ISO.BIN.ENC
config : Crash Twinsanity.ISO.BIN.ENC.CONFIG and place it on the PS2ISO folder.
 
@Vika23 asked me to port Scarface config to a PAL version so here it is.

Scarface [SLES-54182]

Code: 
3D 00 00 00 11 11 00 00 0A 00 00 00 08 00 00 00 F0 08 51 00 80 3F
03 3C 00 3F 03 3C 44 09 51 00 C8 42 03 3C C8 41 03 3C 48 09 51 00
20 43 03 3C 20 42 03 3C 6C 0B 51 00 16 43 03 3C 96 42 03 3C 70 0B
51 00 48 43 03 3C C8 42 03 3C 3C 37 64 00 12 00 01 45 12 00 00 10
A0 45 64 00 20 00 81 C4 08 00 E0 03 A4 45 64 00 80 3F 03 3C 00 00
00 00 00 00 00 00 00 00 00 00



kozarovv said:
Damn i was also thinking that is some automated output, my notes about game patches usually looks like that :

Code: 
1FAC90

fog 001FB074
grain 001FB334
silent hill filter - fps boost 0020FC88 14400071

And all that in file called New11, when i'm already on file New29. Later after few days i'm figuring out wtf is that, and which game use it. :D
Above is for Nam 67 Shellshock. iirc..
Click to expand...

Ha-ha, I understand you. It was so clean just for an explanation sake xD
If I will find will and time I will write a JS parser.
 
MadSaint1998 said:
Enter aldo's config database http://ps3.aldostools.org/ps2config.html ,go on (CUSTOM + NET + GX + SOFT) and choose ENC PS2 Classics. Download the ENC config SLES or SLUS depending on your game ID and Version and rename the config to the same name of your game adding the .config extension to it for example game name : Crash Twinsanity.ISO.BIN.ENC
config : Crash Twinsanity.ISO.BIN.ENC.CONFIG and place it on the PS2ISO folder.
Click to expand...
I tried that since I saw your guide in another post either I download the wrong config or it didn't work on me
 
nictse said:
@krug @MadSaint1998
Dump ur memord card to PS2 or PSCX2 coutinue ur journey...
I searched u2b,someguys make PS2 walkthough,maybe it only happen to emu on PS3,so $ony move it from store.
Click to expand...
Yeah I know how to do that now, but back when i bought it i had no idea you could do that. As i said, since then i moved to the psp version so i didn't bother decrypting the data
 
@AceJGamerSE Try create an pkg of the game instead of using the ps2 classics placeholder, and use the right ENC config for your game.
@nictse i never had problems with gta vcs for some reason...
@lex3a your scarface pal port config don't work, lagging heavily (2 fps), try porting the slus config that is in aldotools's database
 
Last edited:
MadSaint1998 said:
@AceJGamerSE Try create an pkg of the game instead of using the ps2 classics placeholder, and use the right ENC config for your game.
@nictse i never had problems with gta vcs for some reason...
@lex3a your scarface pal port config don't work, lagging heavily (2 fps), try porting the slus config that is in aldotools's database
Click to expand...
Ok looks like I didn't put the iso. In the file now it works fine! Ty for your help!
 
lex3a said:
I have tested this config now. No lags.
Make sure you really have SLES-54182. This config won't work with SLES-54183, SLES-54184, SLES-54534, SLES-54271
Click to expand...
Ohh i see now, mine is SLES-54271, sorry about that my mistake...
Could you also port to pal the gran turismo 4's @mrjaredbeta SCUS custom config that is in aldo's database ? (while adding the licenses freeze issues fix of the GX or soft's pal config)
Thanks for your work though :encouragement:
 
You must log in or register to reply here.

Similar threads

Back
Top