FunTuna (Free McBoot for Fortuna)

PS2 FunTuna (Free McBoot for Fortuna) v1 (r3)

Go to download
Overview Extra info History Discussion
Sou ruim até com letras e muitos números, pesquisei sobre compilar, Pensei que era só modificar o bloco de notas, ou algo próximo, está em FAT32, tudo, queria abrir o FMCB e carregar jogos de ps1 com o nome bonitinho direto, mas, vou testar o exploit opentuna ps2BBL, e esse do funtuna, inserindo em BOOT o POPSLOADER ao ligar o console fiz um teste e obvio que ele carrega, mas não chama o POPSTARTER, outra é mais próximo modificar uma peça do console ou apresentar uma nova placa mãe com cpu e gpu integrado h81 slot notebook com um m2, soldar uma BIOS do PS2, ou fazer um ELF para chegar até o cartão sd mx4sio para puxar os jogos sem 1 ou 2 gatilhos, que seria o OPL e o BOOT-mx4sio-EXFAT em EXFAT, porque fica um monte de trambolho no usb e no console, seria interessante somente para transferência de dados o pendrive porque 1.1 é muito ruim, Esse fork não inclui leituras de pasta fora a ELF acrescentado no menu ou no mesmo lugar que na pasta BOOT, SE NÃO ESTOU ENGANADO E NÃO ME ENGANO, falha a leitura e carregamento de mass0 FAT32 e EXFAT, como fazer a leitura de irx para o configurador ficar em exfat, teria que mecher nas entradas e na raiz da compilação, JÁ SABEMOS O QUE PODE SER MAIS OU MENOS.


------- English translation -------

I'm even bad with letters and a lot of numbers, I researched compiling, I thought it was just a matter of modifying the notepad, or something similar, it's in FAT32, everything, I wanted to open the FMCB and load ps1 games with the cute name straight away, but, I'm going to test the opentuna ps2BBL exploit, and this one from funtuna, inserting POPSLOADER in BOOT when turning on the console, I did a test and obviously it loads, but it doesn't call POPSTARTER, another is closer to modifying a part of the console or introducing a new card mother with cpu and integrated gpu h81 slot notebook with an m2, solder a PS2 BIOS, or make an ELF to reach the mx4sio sd card to launch the games without 1 or 2 triggers, which would be the OPL and the BOOT-mx4sio- EXFAT in EXFAT, because there is a lot of clutter on the usb and on the console, it would only be interesting for data transfer on the pendrive because 1.1 is very bad, This fork does not include folder readings other than the ELF added to the menu or in the same place as in the BOOT folder, IF I'M NOT MISTAKEN AND I'M NOT MISTAKEN, reading and loading mass0 FAT32 and EXFAT fails, how to read irx so the configurator stays in exfat, we would have to tinker with the entries and the root of the compilation, WE ALREADY KNOW WHAT WHICH COULD BE MORE OR LESS.
 
Last edited by a moderator:
anyone knows how to install it manually or choose the installer option that corresponds to a 2.30 90k ? dont have access to a disc burner anymore and my only options are either a manual install or or somehow make the install option for a 90k available in either a 30k or a 77k
 
Cosmic-R said:
anyone knows how to install it manually or choose the installer option that corresponds to a 2.30 90k ? dont have access to a disc burner anymore and my only options are either a manual install or or somehow make the install option for a 90k available in either a 30k or a 77k
Click to expand...
You can simply copy the PSU file from the first post, as @TnA suggested.
Just don't open the Browser with that MC inserted in a 30K.
For safety, do all the job in the 77K you mentioned.

Also, I recommend you to NOT use the on in this thread unless you strictly need it, as it is old.
Instead, you can use https://github.com/israpps/Funtuna-Fork/releases/ which comes with a handy installer.
That fork is the most up-to-date version of FunTuna. I dropped the FunTuna project to focus on XEB+ and left FunTuna's future in @El_isra 's hands. He has done a very good job improving it.
 
i'm trying erase my comentarie but i don't purchase erase, i'm confused sorry, sorry.

but i did progress here, thanks, i can explain for some peoples that wanted, how to use on the 900XX the mix compressed of my config, with wLaunchELF-EXFAT-MX4SIO, I configured to load and to list thegames on the POPSLOADER, and to play anyone game of list of pendrive independent on the POPSLOADER, in the FMCB with the games on pendrive at EXFAT is the POPSTARTER too, with the load of POPSLOADER, i configured the FMCB_CFG with the OSDSYS path name PlayStation 1, since of the that START/Onn the Playstation 2, will can add the OPL that will want, the that be there is Official 1.0.0, no block devices and NBD SERVER, but if will was to play the games of PS1, already be configured, especifically to the play games of PS1!

Send the message and i will send the archieves, to add in the mc0/memorycard and the of mass pendrive, to add games the PS1 with the installer popstarter in your pendrive path POPS.
 
HWNJ said:
You can simply copy the PSU file from the first post, as @TnA suggested.
Just don't open the Browser with that MC inserted in a 30K.
For safety, do all the job in the 77K you mentioned.

Also, I recommend you to NOT use the on in this thread unless you strictly need it, as it is old.
Instead, you can use https://github.com/israpps/Funtuna-Fork/releases/ which comes with a handy installer.
That fork is the most up-to-date version of FunTuna. I dropped the FunTuna project to focus on XEB+ and left FunTuna's future in @El_isra 's hands. He has done a very good job improving it.
Click to expand...
ive finally gotten around to install it, first i tried manually copying the psu file on the 30k along with the other folders, put it on the 90k and the exploit does initialize as expected. (used isra's fork)

problem is that OPL never starts, it stays on a black screen, wle and the fmcb config do work but opl never booted not even trough wle even if it was located on a usb drive, the only time it did start was when i put my fmcb memory card on the slot 2 and used wle to start the opl 1.1.0 on there.

so since i had the installer .elf on the usb drive i tried installing again from there and same result wle and fmcb config work but not opl

i even tried copying the opl from the fmcb mc to the funtuna mc and adding it trough the configurator but same result, not even trough wle it would work

so idk whats at play here
 
Hi HWNJ and TnA, El Isra, At XEBPLUS, XEBPLUS_XMAS.ELF. 30%.

only the Smasher i got to execut, say no find executable.

to OPL, and all Launch's.ELF, only i got to put icons and ISR-EXFAT-MX4SIO, kHn, ULE FAT32.

no path that i pulled, find the executable.ELF the path:PLG/PLG_.lua, I tried the path: VALUEA mc?:/APPS and VALUEB mass?:/APPS and VALUEC mass?:/XEBPLUS/APPS

inside of DASHBOARD no find executable, the that can be ?

i me attention, i change scriptLUA to singleELF and work good is normal, this is was my mistake,
 
Last edited by a moderator:
El_isra said:
This is the 5th time you spam this question.

Add it yourself. I'm not adding stuff that's not truly needed by all the consumers of the program.

It's not that hard.
Click to expand...
Its the second time I posted this dont lie, I think most people would like to play PS1 games too, I mean PS2 supports it
 
Fannste94 said:
Its the second time I posted this dont lie, I think most people would like to play PS1 games too, I mean PS2 supports it
Click to expand...
You can manually add it yourself. Most people do that themselves. Look for a tutorial. It is not that hard.
 
You must log in or register to reply here.

Similar threads

Back
Top