You cant use a e3 flasher on a 3000.You just waisted your money.hello.. ay have ps3 cech3004a bricked. ay buy e3 fllasher and flash dump file but still not work. power working but no hdmi signal. ay dont have a backup. please help.tnx
![]()
Hahaha E3 Flasher is for Nor Consoles and 3000 have a NOR Chip and console can be recovered by patching the Dump with CoreOS 4.82 of ofw and @littlebalup has made a tutorial on it don't make a wrong answer search on it beforeYou cant use a e3 flasher on a 3000.You just waisted your money.
Does this only work if your on 4.82? You wouldnt be able to downgrade from 4.83 to 4.82 now would you?http://www.logic-sunrise.com/forums...ne-ps3-suite-a-un-flash-ps3xploit-malheureux/
Translate this page and do as steps say hope this will not be considred a breaking rule cause it from another site![]()
If I remember correctly the chip is a bit different on these models, it's the opposite way round and a few of the pins are different so you crnt get a decent dump of it with a hardware flasher that is use on the earlier models, you can also permanently brick you console if you try to do it this way.
Sent from my F3311 using Tapatalk
Cant you just nor flash a 3000 or superslim back to 4.82 with a hardmod if you want han back? I know its a costly option compared to just buying a cfw console,but of course a option is still a option.
no you can't EEPROM won't let ps3 boot causing a black screen cause NOR flashed with a inferior coreOS so EEPROM accept same current coreOS version or superior like if you want to go back to 4.82 and have full HAN Functions you cannot EEPROM want let you pass causing ps3 not to boot but just a black screen if this has a bypass then we can say all ps3 models should be exploitables returning to a choice FWAnd this was the question i asked
So you cant do the e3 flasher if your ps3 is on 4.83 then,but you can still unbrick it if its on 4.82 by patching the dump with core os 4.82.no you can't EEPROM won't let ps3 boot causing a black screen cause NOR flashed with a inferior coreOS so EEPROM accept same current coreOS version or superior like if you want to go back to 4.82 and have full HAN Functions you cannot EEPROM want let you pass causing ps3 not to boot but just a black screen if this has a bypass then we can say all ps3 models should be exploitables returning to a choice FW![]()
So you cant do the e3 flasher if your ps3 is on 4.83 then,but you can still unbrick it if its on 4.82 by patching the dump with core os 4.82.
Is this information correct for 3000's and superslims?
I see.So the 3000 is a nor,but some ss's arent.Only NOR PS3s. Some Super slims are eMMC not NOR, They are the 12 GB ones normally.
Your ps3 didnt happen to brick on 4.83 did it?hello.. ay have ps3 cech3004a bricked. ay buy e3 fllasher and flash dump file but still not work. power working but no hdmi signal. ay dont have a backup. please help.tnx
![]()
yes but for 3XXX and NOR Super Slim Cause they have both eMMC and NOR Models eMMC ones have no flasher :3So you cant do the e3 flasher if your ps3 is on 4.83 then,but you can still unbrick it if its on 4.82 by patching the dump with core os 4.82.
Is this information correct for 3000's and superslims?
You still can patch with a CoreOS from a 4.83 OFW and make it work.So you cant do the e3 flasher if your ps3 is on 4.83 then,but you can still unbrick it if its on 4.82 by patching the dump with core os 4.82.
There are eMMC flashing kits available but they are professional programming kits for new and in circuit eMMC chips and they are expensive. £169 - £250 for the kits.yes but for 3XXX and NOR Super Slim Cause they have both eMMC and NOR Models eMMC ones have no flasher :3