PS3 MAMBA/PRX LOADER (+AUTOLOADER) updated with 4.75 Support

Following the update to VSH PRX Loader v1.11, developer _NzV_ also has updated MAMBA/PRX LOADER (+AUTOLOADER), which will load the MAMBA (Cobra Lite variant originally developed by Estwald) and VSH Plugin for the PS3. This can be done automatically on system boot for Standard CFW's or can be done by launching the utility. This update provides support for upcoming 4.75 CFW's. [break]ss[/break] Additional details about this very useful utility can be seen via this link

​

About MAMBA Loader (+AutoLoader)

MAMBA/PRX Loader is a homebrew which will allow you to load MAMBA and/or VSH plugins (with MAMBA or PRX Loader) by two different way : at system boot or after.
​

So, what is MAMBA ?MAMBA is a lite version of COBRA (No PS2 and PSP support) for non cobra cfw (or cobra cfw with cobra toggle off), it add features like NFTS support, ISO support, NetISO (ps3netsrv), VSH plugins, PS3M_API, ... to your firmware.

Supported CFW

• CEX: 3.55, 4.21, 4.30, 4.31, 4.40, 4.41, 4.46, 4.50, 4.53, 4.55, 4.60, 4.65, 4.66, 4.70, 4.75
• DEX: 3.55, 4.21, 4.30, 4.41, 4.46, 4.50, 4.53, 4.55, 4.65, 4.66, 4.70

Changelogs

NEW v2.1.3:

• Add support for CFW 4.75.
• MAMBA updated (Add support for CFW 4.75)

UPDATE v2.1.3:
I have updated MAMBA/PRX Loader (But i don't have changed his version, its sill v2.1.3) with an updated version of MAMBA who fix an error introduced in last version released with the Loader.

Note : If you use AutoLoader re-install it to update MAMBA.



v2.1.2:

• MAMBA updated (Add support for mmCM)

v2.1.1:

• MAMBA updated (Add support for NetIso (ps3netsrv))

v2.1.0:

• MAMBA updated:
  • Add support for discless (bdmirror) mode with JB format game (dynamic patch of libfs.sprx like COBRA)
  • Enable opcode "SYSCALL8_OPCODE_AIO_COPY_ROOT"
  • Add support for 4.70DEX
  • Code improvement and cleaning
• Add remove LV2 memory protection for all rebug cfw bellow 4.53
• Add support for 4.70DEX
• MAMBA/PRX Loader payload updated: add an opcode to check if its really loaded
• Loader and Autoloader will now check if MAMBA/PRX Loader payload is truly installed

v2.0.0:

• MAMBA/PRX Loader has now is own payload to load MAMBA instead of using Iris (sky) payload. The new payload will load MAMBA as the same way was stage2.bin on COBRA CFW.
• sys_init_osd.self (Autoloader) is no more firmware specific (payloads are no more embedded in it)
• sys_init_osd.self (Autoloader) will now clear the memory used by COBRA stage1 (if a COBRA CFW is detected and only when cobra was toggled off)

Download: MAMBA_PRX_Loader (Source Code: https://github.com/NzV/MAMBA_PRX_Loader)

Source: PSX-Place.com (via MAMBA PRX Loader thread)

---

Clicking this thread you can see all the latest 4.75 Related Releases (Homebrew / Tools / Apps)
​

 

Test

I tested It on Cfw Ferrox Beta 4.75, but i got black screen everytime I try to run.
I don't known what is the problem, but other homebrews (like IrisMAN and MultiMAN) work fine with limited function.

Do you want to test too?

[MENTION=600]_NzV_[/MENTION]

 

[MENTION=768]reiza72[/MENTION] before _NzV_ answer you can try this: VSH PRX Loader v1.11 (Unofficial): Adds Support for upcoming 4.75 CFW - PSX Place i think this help with find what causing bug when he know this working or not.

 

[MENTION=768]reiza72[/MENTION] before _NzV_ answer you can try this: VSH PRX Loader v1.11 (Unofficial): Adds Support for upcoming 4.75 CFW - PSX Place i think this help with find what causing bug when he know this working or not.

I just tested it and works fine! I load successfully WebMAN Mod 1.42 (for 4.75).

 

Good i think this help resolve problem with MAMBA Loader (+AutoLoader). Just wait for _NzV_.

 

Update: I can't run any games with WebMAN Mod 1.42. I don't known why, but I will do more test.

 

I tested It on Cfw Ferrox Beta 4.75, but i got black screen everytime I try to run.
I don't known what is the problem, but other homebrews (like IrisMAN and MultiMAN) work fine with limited function.

Do you want to test too?

[MENTION=600]_NzV_[/MENTION]

i have updated the pkg, two 4.75 symbols was wrong (thx [MENTION=89]aldostools[/MENTION]), can you try again please ?

 

[MENTION=600]_NzV_[/MENTION] OK! Working.

 

Now is working! Thanks you!

 

Updated first post with latest download.

My apologies to [MENTION=600]_NzV_[/MENTION] i seen your post about the new link and i had every intention of adding it to this new release, but had to run out and i completly forgot i did not add this update. Again my apologies.

 

i have updated the pkg, two 4.75 symbols was wrong (thx [MENTION=89]aldostools[/MENTION]), can you try again please ?

Hi , I try to install " autoloader" on habib 4.75 v1.0 , it cause ps3 become softbrick ... please check

 

Hi , I try to install " autoloader" on habib 4.75 v1.0 , it cause ps3 become softbrick ... please check

No need to check....Installed fine on Habib 4.75 with webman mod.....Good alternative to Cobra..

But if i remember correctly there is no support for ps2/psp isos. Any plans to implement this ?

Regards

 

Hi , I try to install " autoloader" on habib 4.75 v1.0 , it cause ps3 become softbrick ... please check

it work mate without any problem ; hold CROSS when "MAMBA/PRX Loader" start to install "MAMBA/PRX Autoloader" to your PS3, when it does you will earn one beep if no error has occurred and your ps3 will restart
then if you were using cobra you need to rename boot_plugins.txt to mamba_plugins.txt file in dev_hdd0 then restart your ps3
all plugins that were running on Cobra (multiman (without updating it until there will be an update) webMAN MOD (update it to the last version v1.42.01 ), PSNpatch (update it to v04.70.07 ) .....) will work like a charm again

 

If I run it normal , everything is fine ( webMAN MOD & psnpatch ) ...
If I install " Autoloader " , ps3 wont boot after " one beep "...then I must reflash fw again to fix the softbrick...
model : cechp07 + habib 4.75 v1.0

edit: I fixed it already ... ( delete mamba_plugins.txt first then run "autoloader" , wont cause softbrick)

 

If I run it normal , everything is fine ( webMAN MOD & psnpatch ) ...
If I install " Autoloader " , ps3 wont boot after " one beep "...then I must reflash fw again to fix the softbrick...
model : cechp07 + habib 4.75 v1.0

try to reinstall the cfw , then try to do it again but this time keep holding the X right after you lunch MAMBA/PRX Loader ; just in one sec press X again after lunching MAMBA/PRX Loader until you hear the beep

 

thank you ... I fixed it already.. ( delete mamba_plugins.txt first then run "autoloader" , wont cause softbrick)

 

it work mate without any problem ; hold CROSS when "MAMBA/PRX Loader" start to install "MAMBA/PRX Autoloader" to your PS3, when it does you will earn one beep if no error has occurred and your ps3 will restart
then if you were using cobra you need to rename boot_plugins.txt to mamba_plugins.txt file in dev_hdd0 then restart your ps3
all plugins that were running on Cobra (multiman (without updating it until there will be an update) webMAN MOD (update it to the last version v1.42.01 ), PSNpatch (update it to v04.70.07 ) .....) will work like a charm again

your post deserves to be on the readme of mamba and webman mod compatibility. thank you.

 

MAMBA/PRX LOADER (+AUTOLOADER)

The MAMBA I have to always initialize it or just once?

 

MAMBA/PRX LOADER (+AUTOLOADER)

The MAMBA I have to always initialize it or just once?

if you held while installing then just once

 

if you held while installing then just once

Thank you for the information